All Makes All Models OER Products

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Reproduction of the original non-retractable type standard front or rear seat belt assembly designed for use on various 1964-66 GM models. Each seat belt features the original style webbed design belt along with correctly...

Reproduction of the original stamped aluminum door sill plate designed for use on 1970-81 Camaro and Firebird models. Reproductions include a correctly embossed "Body by Fisher" emblem riveted to the sill plate same as...

Reproduction of the original outer door mirror bracket used to attach the outer door mirror base to the door. Can be used to install the mirror on all 1970-81 Camaro and Firebird standard models. For use with RH or LH door...

Reproduction of the original door hinge spring designed for use on various 1982-06 GM models including the popular 1982-92 Camaro and Firebird models. After just a few short years, the original door hinge springs will...

This is the correct clip designed to install an OER reproduction 1970-78 padded dashes. Clip is manufactured to original specifications using stamped steel. This is the shorter clip of the two original clips used to install...

OER® reproduction of the original hood to cowl seal for all 1967-72 Chevrolet and GMC trucks, Suburbans, 1969-72 Blazer and 1970-72 Jimmy models. Manufactured in the correct configuration for an authentic replacement of...

Reproduction of the original power steering Ram hoses designed for use on 1962-67 Chevy II and Nova models. Each hose is manufactured to factory specifications using OE materials duplicating the original in fit and function....

Reproduction air cleaner lid seal designed to seal between the lid and the base for various applications.

Reproduction of the original 1973-74 "Type-T" rear tail lamp panel, and 1973 Camaro rear sail panel emblem (2 required) designed for Camaros that included the "Type LT" option. Each emblem is manufactured in die-cast zinc to...

Reproduction of the original front license plate bracket designed for use on 1970-73 Camaro Rally Sport (RS) models (with split front bumper). This bracket is manufactured in stamped steel and features an EDP coating for rust...

OER® reproduction of the original front grill designed fo use on 1970-71 Trans Am models. This reproduction is manufactured in quality injection molded ABS replicating the original grill in appearance and quality. Features...

OER® reproduction of the original front grill designed fo use on 1970-71 Firebird models. This reproduction is manufactured in quality injection molded ABS replicating the original grill in appearance and quality. Features...

OER® reproduction of the original 1969 Firebird grill. This reproduction is injection molded as original and available in silver. Will fit all 1969 Firebird and Trans Am models.

Reproduction of the original heater and AC fan speed switch designed for use on 1967-68 models. This reproduction will repace the damaged or non-working switch in original or reproduction heater control assemblies. Camaro...

Tired of sunvisors that won't stay put because the nylon tip is gone? Reproduction of the sunvisor tips and bushings designed for use on various GM models. The sunvisor bushings are manufactured to correct OE specifications...

Correct reproduction of the original roof rail weatherstrips designed for use on 1967-68 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...

This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...

Replace your dented or missing original wheel opening moldings with this premium replacement molding set. Manufactured to OE specifications using original materials for an authentic appearance. Sold as a set of 4. Mounting...

OER® manufactured reproduction of the original bottom bucket seat support spring assembly designed for use with 1962-1965 Impala, Bel Air and Biscayne models. Seat springs are often overlooked when restoring the interior....

Reproduction of the original radiator retainer pad designed for use on 1968-81 GM small block or big block models. Keeps the radiator in place and safe from loosening while cushioning and protecting. For use with the various...

OER reproduction front grill assembly for 1971-72 Plymouth Duster 340 and Twister 340 models, produced using a high-pressure injection molding process, and designed to exact original specifications. Each grill is masked and...

Correct reproduction of the original radiator overflow jar for fitment on 1975-79 Nova and GM X-Body models. Utilizing correct blowform method, each jar is manufactured in correct clear plastic material and features correct...

Reproduction of the original passenger side Camaro/Firebird door vent glass designed to install same as original factory glass. Includes correctly drilled hole for vent glass handle. Designed for use with vehicles originally...

Reproduction flat head design door lock knobs for 1961-1966 GM passenger cars, 1973-86 C/K and 1987-91 R/V truck models. Manufactured in injection molded plastic just like the factory original item for a precise fit and...

Reproduction of the original trunk weatherstrip manufactured in the correct configuration. Prevent water damage in your trunk area by replacing the worn and damaged weatherstrip with this authentic reproduction. The soft...

OER reproduction of the original back up lens designed for use on 1965 Impala models. This lens is manufactured in injection molded acrylic matching the original in quality and appearance. Features all the correct SAE and...

Correct reproduction of the original roof rail weatherstrips designed for use on 1963-64 Impala and GM Full Size 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...

Reproduction of the original front hood lip molding and emblem designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high grade aluminum duplicating the original...

Reproduction of the original front grills designed for use on 1979-81 Firebird and Trans Am models. Manufactured in injection molded ABS plastic material for an original appearance and fitment. Each grill is finished in the...

OER® reproduction of the original front grill for use with 1967 Firebird models with 400 engines. Each grill is manufactured to exact specification allowing a perfect fit onto any 1967 Firebird. Grills are correctly painted...

This is a quality OER® reproduction nut which is used to mount the leaf spring front eye bracket. Sold as a 6 piece kit. Applications: 1973-74 Buick Apollo 1975-79 Buick Skylark 1967-81 Chevrolet Cam aro 1968-79 Chevrolet...

Reproduction of the original rear trunk weatherstrip designed to fit a variety of Mopar models from 1960-1971. Each trunk weatherstrip is manufactured in durable EPDM rubber material in the correct configuration ensuring an...

Reproduction driver side headlamp bezel for all 1974-76 Firebird models. Each bezel will replace the original exactly. These bezels are produced from the original tooling obtained from General Motors by OER. Made in the USA! ...

Reproduction of the original park lamp assembly designed for use on 1968 Camaro models without the RS option. Manufactured to original specifications including correct clear acrylic lens and stamped aluminum housing. Comes...

OER® reproduction of the original disc brake pedal pad designed for use on various GM models with automatic transmission. Each pedal pad is manufactured in EPDM rubber to factory specifications and replicates the original...

Superb reproduction of the original interior rear window trim moldings designed for use with 1967-68 Camaro and Firebird models. This rear window moldings are manufactured in injection molded ABS replicating the original in...

Quality reproduction of the original pitman arm designed for 1963-67 Chevy II/Nova and X-body models with manual steering. Manufactured to exact factory specifications. Each assembly features heat treated components and...

Produced in brightly polished aluminum, these reproduction wheel opening moldings will install and replace your originals exactly. These moldings were available from the factory as an exterior option for 1968 Camaro Rally...

Reproduction of the original tail lamp lens designed for use on 1971-72 Nova models. Each lens is manufactured to original specifications in injection molded acrylic lens material replicating the original in quality and...

Reproduction of the original rear trailing arm rubber bushing designed for use on various 1959-64 GM Full size models including Impala, Bel Air, El Camino, Parkwood, Brookwood and Biscayne. This bushing will replace the old...

Reproduction of the original tail lamp lens designed for use on 1971-72 Nova models. Each lens is manufactured to original specifications in injection molded acrylic lens material replicating the original in quality and...

Correct reproduction of the original tail lamp lens assembly designed for use on 1973-74 Nova applications. Each injection molded lens will replace the original exactly and includes all correct SAE markings along with the...

A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body ...

Reproduction of the original seat belt guide designed for use on various 1974-81 GM models with bucket seats. Manufactured in injection molded ABS featuring the correct dimensions and grain that matches the original guide....

Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...

Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...

After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...

The most accurate reproduction fuel tank sending unit in the industry, with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original....

Reproduction of the original molded vent window seals designed for use on 1968-72 Chevy II / Nova and X-Body, 2 door models. MEach weatherstrip is manufactured of durable rubber for an authentic appearance and original fit....

Authentic and correct, original-style "SS" emblems for use on all 1967 Camaro SS-350 or SS-396 Camaro models. Manufactured to factory specifications including correct die-cast chrome plating and eggshell white insert. This...

OER Reproduction of the original door hinge bolts designed for use with 1967 Camaro and Firebird cast door hinges. Correct OE style bolts with washers. 5/16-18" x 1-1/8". Set includes 18 hex head screws and 6 countersink flat...

Reproduction of the original zinc die-cast hood louvers for all 1967 Camaro SS models. Manufactured with OER® tooling to exact factory specifications. Features correct black paint scheme, chrome accents, correct size mounting...

Designed for outdoor use, this OER® Authorized WeatherBlocker™Plus cover is manufactured using a durable 4-layer non-woven material that provides a high level or protection from the elements and features a soft...

OER® reproduction of the original volume and tuning control knobs designed for use with 1967-69 Firebirds with original AM or AM/FM radios. Manufactured to OEM specifications fgeaturing a bright chrome finish. Will...

OER® reproduction of the original Bow Tie floor mats that replicate the originals in every detail! Reproduced and die-cut to correct factory dimensions, each floor mat is manufactured in quality rubber featuring the Bow Tie...

Reproduction of the original rear bumperette guards designed for use with 1969 standard Camaro models. These bumper guards attach to the rear bumper and extend downword below the rear bumper. This bumperette was a standard...

Reproduction of the original rear bumper brackets designed for use with 1969 Camaro models. Manufactured in quality high grade stamped steel replicating the original in quality and design. Each bracket features the correct...

Reproduction seal that installs on the radiator support for 1967-69 Camaro and Firebird models with original factory air conditioning. Each hood seal is manufactured to replicate the original in design, quality and length. ...

Reproduction of the original weatherstripping that attaches to the outer cowl top vent grill and seals the area between the cowl panel and hood. This reproduction weatherstrip is manufactured in quality EPDM runner compound...