All Makes All Models OER Products - Door Components

OERŪ reproduction of the original window crank handle for various 1978-88 GM models. This window crank handle features a wider curved arm than the previous 1968-77 version. Manufactured in die-cast zinc featuring a chrome...

Reproduction of the original door lock knobs for various General Motors vehicles produced in 1967. Manufactured in injection molded plastic with a molded-in-black finish. The 1967 door lock knobs are the correct style...

Reproduction of the original lower vent frame adjusting screw used for the fine adjustment of the vent window assembly in all 1967 Camaro and Firbeird models. This screw is threaded on both ends with a shoulder on one end and...

Reproduction of the original window crank handles designed for use on 1967 Dodge and Plymouth A and B Body models. These reproduction window crank handles are manufactured in die-cast zinc and replicate the original in...

Reproduction of the original vent window crank handle designed for use on 1963-64 Corvette, various 1959-64 Buick and Oldsmobile models, and as a custom replacement for various 1961-66 GM models. Manufactured in die-cast zinc...

OER reproduction of the original door handle escutcheons designed for use on various 1975-82 GM models. Manufactured from quality injection molded ABS featuring bright chrome plated trim and black detailed accent. Door handle...

These billet door lock knobs for 1964-74 Mopar A and B-Body cars are machined from solid aluminum and designed to replicate the look of the originals. These billet knobs are polished for a brilliant shine and will not chip...

When it comes to special interior items, the door lock knobs are something that's seen and used consistantly. These all new Billet style lock knobs include the correct design but manufactured with custom materials. Replace...

Replacement door window crank handle designed for use on the door panel for various 1965-90 GM models. Each handle is manufactured from die cast zinc material and chrome plated. Features a non-riveted black knob pre-attached...

Reproduction of the original door lock knobs for various General Motors vehicles produced in 1967. Knobs are manufactured in die-cast zinc metal with a chrome-plated finish and are the correct style for 1967, featuring a...

Correct reproduction of the original interior door handle designed for use on various GM models including 1970-74 Camaro and Firebird with deluxe interior. Each handle is manufactured to exact factory specifications in zinc...

Reproduction of the original outer door jamb vent grill manufactured using rigid ABS materials. Installs on quarter panel door jamb area directly below the U-shape door jamb rubber. This reproduction will restore the original...

Reproduction of the original door opening rod designed for use with 1970-81 Camaro and Firebird models. Each rod is manufactured in stamped steel to the correct factory configuration. This rod connects the inner door handle...

OERŪ reproduction of the original window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. Manufactured in die-cast zinc featuring a chrome finish and a clear knob that replicates the...

Reproduction of the original door handle escutcheon trim washer designed for use with 1967-72 Chevrolet and GMC truck models. This reproduction washer is manufactured in heavy plastic to correct factory dimensions for an...

Reproduction of the original inner door handle designed for use with various 1968-74 GM models. Each door handle is manufactured in quality die-cast zinc and chrome plated replicating the original handle in design,...

This OER® reproduction of the original window crank screw designed for use on various 1968-74 Dodge and Plymouth models.This special screw is manufactured to exact specifications and features an original style chrome...

OER® reproduction of the original chrome vent window handles designed for use on 1967 Camaro and Firebird models. Each handle is manufactured in correct zinc die-cast metal than chrome plated to a bright polished finish....

Reproduction of the original door lock knobs for various General Motors vehicles produced in 1967. Knobs are manufactured in die-cast zinc metal with a chrome-plated finish and are the correct style for 1967, featuring a...

Reproduction of the original door lock knob ferrules for various pre-1973 GM models. Manufactured to correct factory specifications, each ferrule replaces the original exactly. Unlike other replacement ferrules on the market...

OERŪ reproduction door handle push button lock spring. This spring is often broken after years of use. When the spring is broken, it will become difficult to lock, unlock and open the door of your vehicle. Applications:...

These reproduction inner door handles replace pitted or missing handles perfectly. Authentic zinc die-cast reproduction is carefully polished and deburred before applying high chrome plated finish just like the originals....

Correct reproduction of the original inner door handle assembly designed for use on various 1970-74 GM models. Each inner door handle is manufactured in zinc die-cast metal featuring correct chrome outer trim, black inner...

Reproduction of the original deluxe interior door panel cups designed for use with 1968-69 Camaro and Firebird models with molded door panels. Manufactured in quality injection molded ABS featuring the correct Madrid grain...

Reproduction of the original door handle escutcheon trim washer designed for use with 1967-72 Chevrolet and GMC truck models. This reproduction washer is manufactured in heavy plastic to correct factory dimensions for an...

Reproduction of the original door jamb vent screws designed for use with various GM vehicles from 1968-81 including Camaro, Firebird Nova, Chevelle and more. These phillips head screws will correctly replace the originals...

Quality reproduction of the original inner deluxe door handle designed for use with all 1967 Camaro and Firebird models with molded door panels (deluxe interior). This handle is reproduced exactly as the original featuring a...

Reproduction of the original type screws that mount the door grab handle to the door panel on 1968-69 Camaro and Firebird models with deluxe style molded door panels. Includes 4 screws to install both RH and LH door grab...

Reproduction of the original power window switch designed for use on 1977-78 Mopar Dodge, Plymouth and Chrysler models. This switch is manufactured with a Convex style button and includes the correct grain and surrounding...

Reproduction of the original door lock knob ferrules designed for use on 1968-70 Mopar B- body models. Each ferrule is manufactured in stamped stainless steel that replicates the original in quality and design. The ferrules...

Reproduction of the original vent window requlator designed for use on various 1965-68 GM Buick, Chevrolet, and Oldsmobile models. Each regulator is designed and manufactured to replicate the original in fit and...

Correct reproduction of the original inner door handle assembly designed for use on various 1970-74 GM models. Each inner door handle is manufactured in zinc die-cast metal featuring correct chrome outer trim , black inner...

Reproduction of the original door opening rod designed for use with 1970-81 Camaro and Firebird models. Each rod is manufactured in stamped steel to the correct factory configuration. This rod connects the inner door handle...

OERŪ reproduction window crank handle designed for use on various 1953-64 models. Handles are manufactured in zinc die-cast material and feature a chrome plated base with a black knob for an authentic appearance and...

OERŪ reproduction of the original inner door handle designed to fit a wide variety of 1949-65 GM passenger car models. Produced in die-cast metal, polished and chrome plated for a lustrous finish to replicate the original GM...

Replace pitted or missing door lock levers with a set of quality reproductions from OER® and bring your interior restoration to the next level. These zinc die-cast chrome plated levers feature the word "Lock" in the...

Replace the cracked or missing door lock knobs on your A or B body Mopar with these quality reproductions from OER®. Each knob is injection molded to the exact OE design offering a perfect fit and complete authenticity....

Quality reproduction of the original inner door handle designed for use with various 1965-67 GM models as listed below. Manufactured in die-cast zinc featuring a chrome finish that replicates the original GM handle in quality...

Reproduction of the inner door lock rod for designed for use on various 1968 GM models including Camaro, Firebird and Nova models. This rod attaches to the door latch and is used to unlock the door from the inside. This is...

Reproduction of the original inner door handle escutcheon designed for use on 1977-81 Camaro and Firebird models. Manufactured from injection molded ABS to factory specifications that replicates the original in quality and...

Reproduction of the original power window switch designed for use on 1977-78 Mopar Dodge, Plymouth and Chrysler models designed to replace the 4-button switch on the drivers door. This switch is manufactured with a Convex...

Reproduction of the original door handle escutcheon trim washer designed for use with 1967-72 Chevrolet and GMC truck models. This reproduction washer is manufactured in heavy plastic to correct factory dimensions for an...

Reproduction of the original outer door jamb vent grill designed for use on 1968-69 Camaro and Firebird models. Replace the old or worn out door jamb vent grill with this reproduction style replacement. The vent grill...

Reproduction of the original zinc die-cast metal door lock knobs designed for use with various General Motors vehicles, Manufactured in die-cast zinc with a bright chrome finish. The 1967 door lock knobs are the correct style...

Replacement for the original inner door window crank handle designed for use on various 1965-90 GM models. Each window crank handle is manufactured in zinc die cast metal with a bright chrome finish. Features a non-riveted...

If you're going to remove the inner door panel or the window handle for repair or replacement, we recommend having this handy removal tool. Removing the door and window handles requires the expansion of the inner spring clip....

Reproduction of the original style door lock knobs and ferrules for various 1968-70 GM models. This kit features original ribbed style die-cast zinc door lock knobs along with OEM-style narrow door lock knob ferrules. Unlike...

Reproduction of the original window crank handle designed for use on 1963-64 Corvette, various 1959-64 Buick and Oldsmobile models, and as a custom replacement for various 1961-66 GM models. Manufactured in die-cast zinc...

Reproduction of the correct washer and spacer designed to keep the vent glass handle from making contact with the vent glass. This washer set will keep the glass from getting damaged or scratched when replacing the vent...

Reproduction of the original door handle escutcheon trim washer designed for use with 1967-72 Chevrolet and GMC truck models. This reproduction washer is manufactured in heavy plastic to correct factory dimensions for an...

Correct reproduction of the original interior door handle designed for use on various GM models including 1970-74 Camaro and Firebird with deluxe interior. Each handle is manufactured to exact factory specifications in zinc...

Reproduction of the original door opening rod designed for use on 1970-81 Camaro and Firebird models. These rods connect the inner door handle mechanism to the door latch. Each rod features correct contours and includes anti...

Reproduction of the original power window switch designed for use on 1969-77 Mopar models. This switch is manufactured with a concave style button and includes the correct grain and surrounding bezel. Each switch is a direct...

Correct reproduction of the original door latch rod assembly designed for use with 1968-69 Camaro and Firebird models. The door latch rod assembly connects the inner door handle mechanism to the door latch. Complete assembly...

Reproduction stepped head design door lock knobs for 1961-1966 GM passenger cars and 1967-70 truck models. Can be used as a service replacement for 1971-86 C/K, 1987-91 R/V truck and a wide variety of other GM models....

Reproduction of the original power window switch designed for use on 1973-76 Mopar Dodge, Plymouth and Chrysler models. This switch is manufactured with a concave style button and includes the correct grain and surrounding...

Reproduction stepped head design door lock knobs for 1961-1966 GM passenger cars. Can be used as a service replacement on 1973-86 C/K, 1987-91 R/V truck models and a wide variety of other GM models. Manufactured in injection...

OERŪ reproduction door handle push button lock spring. This spring is often broken after years of use. When the spring is broken, it will become difficult to lock, unlock and open the door of your vehicle. Applications:...

These authentic window crank handle washers fit between the door panel and the window crank handle. Each washer is designed with the correct thickness to replace your cracked or missing originals. Manufactured in injection...

OERŪ reproduction of the original vent window crank handle designed for use with various 1953-60 Chevrolet models. Each handle is manufactured in quality die-cast zinc and chrome plated offering a highly polished appearance....