All Makes All Models OER - Dash Components

Reproduction of the original fuel gauge designed for use with 1970 Dodge Challenger models with standard (non-Rallye) gauges. Each fuel gauge is manufactured to original factory specifications and features the correctly...

OER ® reproduction of the original padded dash designed for use on 1968 Camaro and Firebird models. Each dash pad is manufactured in modern urethane materials to OEM specifications. Features correct grain and proper seam...

These rattle-stop dash pad clips are an inexpensive and easy-to-install solution for the prevention of noisy dash pads. Over time, cracks begin to form around the bolts holding the top of the dash in place. These cracks allow...

Reproduction of the original rear consol ash tray cover receiver. The ash tray receiver is manufactured in injection molded ABS in the correct grain replicating the original in quality and design. Ash tray door folds in when...

Reproduction of the original standard fuel gauge for 1966-67 Nova models. This in-dash fuel gauge is designed to replace the original factory gauge. This fuel gauge is manufactured to original GM specifications featuring a...

Reproduction of the original tachometer found on 1967 Camaro models with a 350 or 396/325hp engine and original code option U17 (special instrumentation). Each tachometer is manufactured to original factory specifications...

Reproduction of the original Tic-Toc-Tachometer designed for use with 1968 Camaro models with 396/325 hp, or 396/350 hp engines. Each tachometer/clock is manufactured to original GM specifications and features all of the...

Superb reproduction of the original Camaro interior dash pad designed for 1970-78 Chevrolet Camaro models. Each dash pad is manufactured using OEM-style vinyl skin over foam materials that produce a beautiful replica of the...

OER® reproduction of the original padded dash designed specifically for use on 1967 Camaro and Firebird models. Each vinyl wrapped dash pad features a Madrid grain vinyl vacuum formed over a foam core center with a rigid...

Quality reproduction of the original 160 MPH speedometer designed for use with 1968 Chevrolet Corvette models without speed warning. Each speedometer is manufactured to replicate the original in every detail including correct...

Correct reproduction of the original dash glove box bracket arm designed for use with 1970-81 Camaro models. This metal stamped bracket is used to keep the glove box door level when door is opened. Includes correctly shaped...

Reproduction of the original instrument cluster dash gauge lens designed for use with 1964-65 Chevelle and Malibu models. Each lens is manufactured in quality acrylic clear lens material. Features beautifully placed graphics...

OER ® reproduction of the original padded dash designed for use on 1968 Camaro and Firebird models. Each dash pad is manufactured in modern urethane materials to OEM specifications. Features correct grain and proper seam...

A quality reproduction of the original 120 mph speedometer designed for use with 1965 Impala, Bel Air, and Biscayne models. Each speedometer is manufactured to OEM specifications and replicates the original in design and...

Reproduction of the original dash bezels designed for use with 1967 Camaro and Firebird models. Each bezel is manufactured in zinc die-cast metal that features a bright chrome plated finish. Each die cast reproduction is...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

Authentic reproduction of the original instrument cluster lens for 1973-87 Chevrolet and GMC Pickup, Blazer, Suburban and Jimmy models with gauges and without an in-dash clock. Manufactured in quality injection molded clear...

This is an OER® reproduction of the mounting nut used for retaining the headlamp switch to the dash on 1982-92 Camaro models. Manufactured from injection molded plastic, this nut installs through the dash and threads into...

This is the correct clip designed to install an OER reproduction 1970-78 padded dashes. Clip is manufactured to original specifications using stamped steel. This is the longer clip of the two original clips used to install...

Reproduction of the original heater control lens for 1974-75 Chevrolet Camaro models with factory air conditioning. Each lens is manufactured in injection-molded acrylic with correct white lettering and factory symbols...

Reproduction of the original 120 mph speedometer designed for use with 1965 Chevrolet Chevy II, Nova models. Each speedometer is manufactured to factory specifications replicating the original in appearance, authenticity, and...

Reproduction of the original in in dash Rallye gauges designed for use with 1970-71 Dodge Challanger, Plymouth Barracuda, and Cuda models. This complete gauge package includes all 7 gauges that replicates the originals in...

Reproduction of the original dash clock assembly designed for use with 1970 Dodge Challenger models. Each reproduction clock is manufactured with a die-cut stamped steel backing and features a correctly silk screened...

OER® reproduction of the original cigarette lighter knob and element for use on various 1970-91 GM models. This reproduction lighter includes an authentic reproduction of the original knob and element featuring the...

Reproduction of the original volt gauge designed for use on 1970-79 Pontiac Firebird and Trans Am models with the optional Rally gauges. Each volt gauge is manufactured to factory specifications and features correctly silk...

OER® reproduction of the original padded dash designed specifically for use on 1967 Camaro and Firebird models. Each vinyl wrapped dash pad features a Madrid grain vinyl vacuum formed over a foam core center with a rigid...

Reproduction of the original screws designed to install the instrument gauge bezel on 1967-68 Camaro and Firebird models. This phillips head screw is supplied in black phosphate and matches the original OE design. Replacement...

OER® reproduction of the original chrome lower dash air deflector assembly for 1963-81 Pontiac models with air conditioning. Located below glove box and steering column and considered an adjustable lap vent. This reproduction...

A high quality reproduction of the original instrument gauge cluster designed for use on 1965 Chevy II / Nova SS models. Each gauge cluster is manufactured to exact factory specification and includes the fuel, oil, temp and...

Reproduction of the original dash knobs designed for use on various 1969-70 Chevrolet models. This complete dash knob set will replace the old or worn out original knobs and help bring your dash back to a factory fresh...

Reproduction instrument cluster gauge set for 1972-74 Corvette models. Manufactured to original specifications with correct markings for a factory appearance. Important: Low fuel warning indicator is not included. Set...

Reproduction of the original dash pad clip designed to install 1979-81 Camaro dash pads. Each clip is manufactured to replicate the original in quality, design and appearance. Can be used for original GM or reproduction...

OER® reproduction of the original dash instrument cluster case designed for use on 1970-78 Camaro models without gauges. This injected molded reproduction instrument cluster case and lens assembly features the correct...

Reproduction of the original heater switch plate designed for use on 1964-66 Mustangs. Each plate is a manufactured to duplicate the original in quality and appearance. This is the chrome die-cast metal plate that the heater...

OER® reproduction of the original cigarette lighter knob and element designed for use on varius models including 1965-66 Chevy II and Nova models. This reproduction is designed and manufactured to replicate the original in...

OER® reproduction of the original clock/tripmeter reset knob designed for use with various 1963-90 General Motors models. This knob set includes 2 knobs and 2 retaining nuts. Measures 1/2" long. Replaces GM part number...

OER® reproduction of the original headlamp switch knob and stem designed for use on 1971-75 Chevrolet Impala, Bel Air Biscayne, Caprice and 1973-74 C/K 1, 2, 3 Chevrolet/GMC truck models. This headlight switch knob...

You are assured that every OER® part offered is manufactured to exact specifications and will fit and function just like the original part. What's more, most OER® products are officially licensed and carry a full 1...

OER® reproduction of the original padded dash designed specifically for use on 1968 Camaro and Firebird models. Each vinyl wrapped dash pad features a Madrid grain vinyl vacuum formed over a foam core center with a rigid...

OER® reproduction of the original dash heater control knobs designed for use on various 1965-1989 GM models. Each knob is reproduced to exact dimensions and cosmetically correct. Manufactured in injection molded black ABS...

OER ® reproduction of the original padded dash designed for use on 1969 Firebird models. Each dash pad is manufactured in modern urethane materials to OEM specifications. Features correct Madrid grain for an authentic...

Reproduction standard in-dash gauges for 1972-76 Mopar A-Body models including Dart Sport, Demon, Duster and Valiant. Gauges are manufactured to factory specifications using a steel stamped face with correct silk screened...

Reproduction of the original cherry woodgrain dash components that replace the worn out or faded originals in your 1969 Camaro with deluxe interior. Give the woodgrain new luster and a factory fresh appearance with these all...

Reproduction of the original dash carrier bezel assembly designed for use on 1970-1972 Chevrolet Camaro models. Each dash carrier is precision manufactured in quality injection molded ABS and replicated the original dash...

Reproduction of the original instrument cluster lens designed for use on 1969 Firebird and 1969-72 Grand Prix models. Each lens is manufactured in quality clear acrylic material replicating the original in fitment and design....

A quality reproduction of the original 120 mph speedometer designed for use with 1962-64 Chevy II and Nova models. Each speedometer is manufactured to OEM specifications and replicates the original in design and...

Reproduction of the original speedometer designed for use on 1970-1974 Firebird models. Each gauge is manufactured to original specifications including the correct faceplate featuring silkscreened markings that replicate the...

OER ® reproduction of the original padded dash for 1969 Chevrolet Camaro models with air conditioning. Each dash pad is manufactured in modern urethane materials featuring the correct Madrid grain and molded-in faux...

OER® reproduction of the original padded dash designed specifically for use on 1968 Camaro and Firebird models. Each vinyl wrapped dash pad features a Madrid grain vinyl vacuum formed over a foam core center with a rigid...

Reproduction of the original instrument cluster dash gauge lens designed for use with 1964-65 Chevelle and Malibu models. Each lens is manufactured in quality acrylic clear lens material. Features beautifully placed graphics...

Reproduction of the original factory roller style Tachometer used on 68 Chevelle / El Camino models with SS option. Each gauge is manufactured from stamped steel with an injection molded roller face. Gauges are assembled...

OER reproduction of the original cigarette lighter dash bezel unit. This round bezel surrounds the cigarette lighter unit. Each bezel is injection molded and chrome plated featuring the word "LIGHTER" in the correct font. ...

OER ® reproduction of the original padded dash for 1969 Chevrolet Camaro models without air conditioning. Each dash pad is manufactured in modern urethane materials featuring the correct Madrid grain and molded-in faux...

Reproduction of the original fuel gauge designed for use with 1971-74 Dodge Challenger models, and 1970-74 Plymouth Barracuda and Cuda models with standard gauges (non-Rallye). Each fuel gauge is manufactured from die-cut...

Reproduction of the original lower steering column cover designed for use with 1970-81 Pontiac Firebird models without air conditioning. Each cover is manufactured in injection-molded ABS replicating the original factory...

OER® reproduction of the original tachometer designed for use with 1972-72 Chevrolet Chevelle, El Camino, Monte Carlo, and various truck models. Each tachometer is manufactured to factory specifications featuring a stamped...

Reproduction of the original in dash tachometer designed for use on 1970 Chevelle SS and Monte Carlo models. If your vehicle was originally equipped with a 396 (402)/375hp (L78), 396(402)/375hp (L89) or a 454/450hp (LS6)...

Custom white-face heater control lens for 1969 Camaro, 1969-74 Nova, and various other 1971-74 GM X-body models without air conditioning. Each heater lens is manufactured in quality acrylic lens material using injection...

Reproduction of the original Firebird combination in-dash tachometer and clock assembly designed for use on 1973-75 Firebird models. Firebirds originally equipped with optional Rally Gauges also included this tachometer and...

Reproduction of the original dash woodgrain assembly designed for use with 1969 Camaro models that came with the optional woodgraininterior package. Includes the dash panel, ash tray, and glove box door with hinge as shown....