All Makes All Models OER Products - Headlamps

Reproduction of the original front headlamp door assembly designed for use on the drivers side for 1967 Rally Sport Camaros. Each headlamp assembly comes completely assembled and ready to install. Headlight assemblies are...

Correct reproduction of the original headlamp return cover designed for use on 1967 Camaro Rally Sport (with hidden headlamps) models. Manufactured in injection molded ABS to factory specifications. This headlamp cover will...

Reproduction of the 1970-72 Mopar B, C-Body 5-Tab headlamp retaining ring, also known as ring and lug for sealed beam unit. Manufactured in stainless steel just like the factory Mopar item. Sold individually. 4 required per...

Reproduction of the original headlight bezels designed for use on 1965 Impalas and Full Size models. Each bezel is manufactured in stamped aluminum including a bright polished finish offering an original appearance. Includes...

Reproduction of the original headlight actuator support bracket designed for use with 1969 Camaro models with the Rally Sport (hidden headlight) option. This bracket supports the rear portion of the headlamp actuator canister...

OER reproduction of the LH driver side 1969 Charger headlamp door assembly. Each door is manufactured in a high pressure injection molding process just like the factory Mopar item. Injection molded in black, each door is...

OER® reproduction of the original washers and shouldered nuts designed for use with 1967 Camaro Rally Sport models. This nut and washer set is required for the attachment of the output arm to the headlamp motor assembly. Each...

Reproduction of the original style headlamp switch stem and knob designed for use on various GM models including 1972-75 Camaro models. This pre-assembled pullout headlamp switch includes the rod and knob. Features the...

Reproduction of the original style headlamp door motor designed for use with 1993-97 Pontiac Firebird and Trans Am models with hidden headlight option. Mounts to the headlamp mounting bracket. Used in conjunction with the...

Reproduction of the original front headlamp door assembly for the drivers side on 1968 Rally Sport Camaro. Each headlamp assembly comes completely assembled and ready to install. Headlight assemblies are designed to fit Rally...

Reproduction of the nut used to secure the headlamp switch to the dash on 1968 Chevy II/Nova models. Manufactured as original with the correct thread and slotted head design with an insulated inner guide as original.

Correct OER® reproduction of the original headlight retaining ring designed for use on various GM models. The headlamp ring is manufactured in stainless steel offering authenticity and an original appearance. Features 3...

Reproduction of the original headlight bezel designed for use with 1969 Camaro standard models with the optional exterior decor package. Each bezel is manufactured in injection molded ABS to exact factory specifications using...

Reproduction of the original headlamp bezel designed for use with all 1970-73 Chevrolet Camaro models. Each bezel is manufactured in quality stamped aluminum to the original configuration replicaing the original in quality...

OER reproduction of the 1968-70 Mopar B, C-Body headlamp bucket. Manufactured in stamped steel just like the factory Mopar item, each bucket features the correct HI-LO5-LT.-889 markings on the front rim. One bucket required...

Keys onto lower end of headlamp bell crank and acts as an over center counter balance assist. This set includes two attachment brackets which install on the lower edge of the headlamp housing and allow correct closure of the...

OER® reproduction of the original vacuum hose set designed for use on 1969 RS Camaro models. This reproduction hose kit is designed and manufactured to exact factory specifications including correct size vacuum hoses and...

Superb OER® reproduction of the original headlamp bezel designed for use on all 1968 Camaro models with standard grill (non-RS). Each bezel is manufactured in quality stamped aluminum and features a correctly colored...

Reproduction of the original nut and screw set designed to install the headlamp bezel on 1970-73 Pontiac Firebirds models. Each set includes 3 nuts and 3 screws that install 1 headlight bezel. 2 sets required to install both...

Reproduction of the original headlight switch assembly designed for use with 1968-69 Camaro Rally Sport, 1968 Caprice, and 1968-77 Corvette models with the concealed (hidden) headlamp option. Once replaced, this switch will...

OER reproduction of the 1964-76 Mopar B, C, E-Body 3-Tab headlamp retaining ring, also known as ring and lug for sealed beam unit. Manufactured in stainless steel just like the factory Mopar item. Sold individually. 1 set...

OER® reproduction of the original "500" headlamp door emblem designed for use with 1970 Charger 500 models. Manufactured in quality die-cast zinc replicating the original in design and appearance. This emblem features a...

Reproduction of the original headlamp bellcrank shaft and lever support designed for use on 1968 Camaro RS models. These supports are used to support the shaft and lever assembly for the headlamps on RS (hidden headlamp)...

Reproduction of the original headlamp mounting bucket designed for use on various GM models. This headlight bucket keeps the headlamp beam in position once installed. The headlamp bucket attaches to the headlamp housing using...

Exact reproduction of the original headlight bezel designed for use on 1962-64 Chevy II / Nova models. Each headlight bezel is manufactured in aluminum to original GM specifications for a perfect fit and original appearance....

Reproduction of the original headlamp bezel designed for use on all 1974-77 Camaro standard and RS models. Each bezel is meticulously manufactured using stamped aluminum as original with correct silver brushed finish. Will...

If you are rebuilding a 1967 Rally Sport headlamp assembly, then you'll want to replace the upper and lower headlight bushings. These bushings will help promote a smooth and efficient operation when the headlamps are...

Reproduction of the original headlight bezel designed for use with 1969 Camaro standard models with the optional exterior decor package. Each bezel is manufactured in injection molded ABS to exact factory specifications using...

Correct reproduction of the original replacement headlight bezel nut designed for use with 1979-81 Firebird headlight assemblies. This special nut allows the headlight bezel to adjust to the correct alignment. Manufactured in...

OER reproduction of the original 1971-72 Plymouth B-Body headlamp bezels designed for us with 2 door hardtop models including Satellite Sebring, Satellite Sebring Plus, GTX, and Road Runner. Each injection-molded bezel is...

Reproduction of the original headlamp bezel designed for use with 1968 Sport Satellite and GTX models with plastic grill. Manufactured from die-stamped aluminum then polished to a high luster and clear anodized for corrosion...

Reproduction driver side headlamp bezel for all 1974-76 Firebird models. Each bezel will replace the original exactly. These bezels are produced from the original tooling obtained from General Motors by OER. Made in the USA! ...

Reproduction of the correct screw set designed to install the black outer headlamp door to the rear headlamp backing plate. Manufactured in black oxide that matches the original GM screw, this phillips head reproduction is...

Reproduction of the original "square-hole" style mounting bucket designed for use on various 1958-82 GM models. The mounting bucket is designed to allow adjustment of the headlight beam on various 5-3/4" round quad headlamp...

OER® reproduction of the original headlamp bezel designed for use with 1975-76 Chevrolet Nova Super Sport, and 1977-78 Nova Rally models. Each reproduction headlamp bezel is injection molded to exact factory specifications...

Reproduction of the original front headlamp door assembly designed for use on the passenger side for 1968 Rally Sport Camaros. Each headlamp assembly comes completely assembled and ready to install. Headlight assemblies are...

Reproduction of the original headlamp bezel designed for use on 1964 Chevrolet Impala and Full Size models. Each bezel is manufactured in quality aluminum replicating the original in quality and design. Can be installed on...

Reproduction of the original headlamp bezel designed for use on 1971-72 Plymouth Valiant, Duster, and Scamp models. Manufactured from die-stamped aluminum then polished to a high luster and clear anodized for corrosion...

Applications: 1967-1967 Chevrolet Impala 1967-1967 Chevrolet Biscayne 1967-1967 Chevrolet Bel Air 1967-1967 Chevrolet Caprice

Reproduction of the original front headlamp bezel designed for use on 1969 Impala and full size Chevrolet car models. Each headlight bezel is manufactured as original for a perfect fit and appearance. Includes the headlamp...

Reproduction of the LH drivers side 1968-69 Charger grill extension manufactured in a high pressure injection molding process just like the factory Mopar item. Like the original Mopar item, each grill extension features the...

Reproduction of the original headlamp adjustors designed for use on 1968-71 A, B and E body Dodge and Plymouth models with a 2 headlamp system. Includes 4 correctly produced adjustors, 2 springs and 2 screws. Applications:...

OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on RH passenger side. Each headlight bezel is manufactured in black injection molded ABS plastic, and finished in argent silver in the...

Reproduction of the original headlamp bezel designed for use on all 1974-77 Camaro Z/28 models. Each bezel is meticulously manufactured using stamped aluminum as original with correct matt black finish. Will fit and install...

Reproduction of the original headlamp housing designed for use on standard 1967 Camaros. Manufactured to exact factory specifications, each housing replicated the original in fit, appearance and functionality. The headlight...

Reproduction of the original front headlight bezels designed for use on 1963 Impala and Full Size models. Each bezel is manufactured in stamped aluminum including a bright polished finish offering an original fit and...

Reproduction of the original RS Camaro headlight hinge that pivots the headlamp concealment door assembly when the headlights are activated. Manufactured in OEM zinc die-cast material. Hinge was installed on both the LH and...

Reproduction of the headlamp bezels designed for use on 1973-1974 Plymouth Valiant, Duster, and Scamp models. Manufactured from die-stamped aluminum then polished to a high luster and clear anodized for corrosion resistance....

OER reproduction of the original 1970 Dodge Charger headlamp door assembly designed for use on 1970 Charger models with concealed headlamps. Each headlamp door assembly is manufactured in injection-molded ABS material and...

OER reproduction of the RH passenger side 1968 Charger headlamp door assembly. Each door is manufactured in a high pressure injection molding process just like the factory Mopar item. Injection molded in black, each door is...

Reproduction of the original "square-hole" style mounting bucket designed for use on various 1958-82 GM models. This headlamp mounting bucket is designed to allow adjustment of the headlight beam and attaches to the headlamp...

OER reproduction of the original 1970 Dodge Charger headlamp crank rod for use on models that included factory concealed headlamps. Includes a 2" slotted rod that acts as a pivot for the headlamp door. Manufactured in stamped...

OER reproduction of the 1973-74 Charger driver side, LH headlamp shield. Manufactured in silver injection molded urethane, just like the original factory item. This headlight shield mounts to headlamp bezel with a plastic...

Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...

Correct reproduction of the insulating rubber bumpers/stoppers used on the 1967-68 Camaro RS headlight door assemblies. These insulators dampen the noise caused by normal opening and closing operations of the door assemblies....

Reproduction of the original headlamp housing designed for use on standard 1969 Camaros. Manufactured to exact factory specifications, each housing replicated the original in fit, appearance and functionality. The headlight...

Reproduction of the original bolt used to pivot the Rally Sport headlamp doors on 1967-69 Camaro models. This bolt installs through the control opening hinge and attaches the hinge to the headlamp housing on RS (hidden...

OER® reproduction of the original headlamp bezel designed for use on 1976 Nova Concours models. Each reproduction headlamp bezel is injection molded to exact specifications and features a correct chrome finish for an original...

Reproduction of the original 1973-74 Charger drivers side (LH) headlamp shield retainer. Manufactured in black injection molded ABS replicating the original factory part. The headlight shield retainer mounts to headlamp...

OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on RH and LH sides. Each headlight bezel is manufactured in black injection-molded ABS plastic, and finished in argent silver in the accent...