Product#: *R802

1967 Camaro SS / RS Emblem Barrel Nut Kit

A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body ...


Product#: *R803

1968 Camaro / Firebird Standard Emblem Barrel Nut Kit

A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body ...


Product#: *R401

Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...


Product#: *R805

1969 Camaro / Firebird Standard Emblem Barrel Nut Kit

A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body ...


Product#: *R804

1968 Camaro SS / RS Emblem Barrel Nut Kit

A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body ...


Product#: *R402

Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...


Product#: *R403

Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...


Product#: *R801

1967 Camaro / Firebird Standard Emblem Barrel Nut Kit

A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body ...


Product#: *R806

1969 Camaro SS / RS Emblem Barrel Nut Kit

A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body ...


Product#: 11501047

1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated

OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...


Product#: A13964

Barrel Nut, Fits 1/8" Emblem Stud, Fits 11/64" Hole, White Nylon

Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....


Product#: *R408

Speed Nut 1/4" Self Thread Cutting - 12 Piece Set

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...


Product#: A3404

Speed Nut 3/16" Self Thread Cutting - Small Washer - Each

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...


Product#: K9695

1967-68 Camaro; Rally Sport; Grill Emblem Retainer

Reproduction of the original 1967-1968 grill emblem retainer for use with RS grill emblems. Attaches to the emblem posts behind the grill and holds the emblem in place. This replaacement retainer is for use with the RS emblem...


Product#: *R404

Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...


Product#: *R406

Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...


Product#: 11502547

Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated

OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...


Product#: K424

Emblem Speed Nut Set ; 5/16" ; 8 Piece Set

Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 8 speed nuts without...


Product#: 9789710

1967 Pontiac Firebird; Fuel Door Emblem; with Hardware

Beautiful high quality reproduction of the original fuel door emblem designed for use on 1968 Firebird models. Manufactured in quality die-cast zinc featuring correct chromed outlines with black and red wings. The mounting...


Product#: K423

Speed Nut Set ; 5/16" ; 4 Piece Set

Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 4 speed nuts without...