All Makes All Models OER Products - Bumpers

OER Premier™ reproduction of the original chrome front bumper designed for use on 1963-66 Chevrolet and GMC Pickup, Panel and Suburban models. This reproduction bumper is designed exclusively for the restorer who...

Reproduction of the original Endura front bumper, hardware, and mounting brackets for use with 1969 Camaro models. This kit includes the front Endura style urethane bumper that was designed as an alternative to the chrome...

Reproduction of the original front bumper cover designed for use on 1978-81 Camaro Z28 models. Painstakingly reproduced in durable high strength urethane with strict attention to detail, this bumper cover will replace the...

OER Premier™ reproduction of the original chrome front bumper designed for use exclusively on 1967 Camaro models. The OER Premier bumper is designed exclusively for the restorer who demands the best the market has to...

Reproduction rear panel for 1976-78 Trans Am models. It will attach as original with no modifications needed. The rear bumper cover is manufactured from fiberglass. Note: Shipped double oversize.

OER reproduction of the original chrome rear bumper designed for use on 1967-68 Camaro models. This rear bumper includes the center rear bracket pre-installed making installation easier. Features superior triple chrome...

Reproduction of the original 2 piece front bumper set designed for use on 1959 Chevrolet Impala, Biscayne, Bel Air and El Camino models. This reproduction bumper set is manufactured to exact specifications and features a...

OER Premier® reproduction of the original chrome rear bumper designed for use with 1960-66 Chevrolet and GMC Stepside Pickup truck models. Each bumper is manufactured to OE specifications replicating the original in...

OER® reproduction of the original front nose header panel emblem designed for use on 1977-81 Pontiac Firebird models. Manufactured to factory specifications in black and gold detailing for originality and authenticity....

OER® reproduction of the original rear panel emblem designed for use on 1986-1987 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...

Reproduction of the original rear bumper cover for all 1978-81 Camaro and Z-28 models. Each rear bumper cover is painstakingly reproduced in durable high strength urethane with strict attention detail in order ti replicate...

Reproduction of the original bumper end insert decals designed for use on 1957 Chevrolet models. Each insert is die cut in a matt black and includes adhesive backed vinyl. Will help breath new life into the bumper ends. One...

OER Premier reproduction of the original chrome rear bumper designed for use on 1970-73 Camaro models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features...

OER® reproduction of the original Arrowhead front bumper emblem designed for use on 1967-68 Pontiac Firebird 400 models. Each emblem is manufactured to replicate the original in quality and appearance. This version is...

Reproduction of the original rear chrome bumper designed for use exclusively with 1968-1970 Dodge Charger models. Each bumper is manufactured to exact factory specifications ensuring an original appearance and fit...

Reproduction of the original Rally Sport split front bumper designed for use with 1970-73 Camaro RS models. Each bumper is manufactured to factory specifications that replicate the original bumpers in quality, fitment and...

OER® reproduction of the rear panel emblem designed for use on 1991-92 Camaro Rally Sport models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet Bow...

OER® reproduction of the original rear panel emblem designed for use on 1985-87 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...

High quality reproduction rear bumper cover for 1982-84 Camaro Z28 Models. Manufactured using OE quality urethane, this reproduction features all correct mounting points and is ideal to replace saggy or damaged original...

OER Premier® reproduction of the original chrome rear bumper for 1963-66 Chevrolet / GMC fleetside truck models. Replace that old worn out and pitted bumper with this all new reproduction. Note: Shipped double...

OER Premier™ reproduction of the original chrome front bumper designed for use on 1955-59 Chevrolet and GMC pickup and sedan delivery models. This reproduction bumper is designed exclusively for the restorer who demands...

Reproduction of the fiberglass rear bumper cover for 1974-75 Trans Am models.

OER Premier™ reproduction of the original chrome rear bumper designed for use on 1958-1959 Chevrolet and GMC Pickup truck models. This reproduction bumper is designed exclusively for the restorer who demands the best...

OER Premier™ reproduction of the original chrome front bumper designed for use on 1971-72 Chevrolet pickup, Blazer, and Suburban models. This reproduction bumper is designed exclusively for the restorer who demands the...

OER® reproduction of the original rear panel emblem designed for use on 1989-90 Camaro Rally Sport models. Each emblem is manufactured to factory specifications in clear lens applique featuring RS lettering with the...

Reproduction front bumper cover for 1977-78 Pontiac Trans-Am models. Manufactured in durable, high quality urethane, each bumper cover will fit and install exactly as original with no modifications needed. Beware of higher...

Reproduction of the original 3 piece rear bumper set designed for 1961 Chevrolet Impala, Biscayne, and Bel Air models. This reproduction bumper set is manufactured to exact specifications and features a beautifully polished...

High quality reproduction rear bumper cover for 1991-92 Camaro Z28 Models. Manufactured using OE quality urethane, this reproduction features all correct mounting points. This reproduction bumper cover isideal to replace...

Reproduction of the original rear bumper cover for use with 1985-90 Pontiac Trans Am and GTA models. Painstakingly reproduced in durable high strength urethane with strict attention to detail, this bumper cover will replace...

OER® reproduction of the original rear panel emblem designed for use on 1983-84 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...

Excellent reproduction of the original body seal strip designed to seal and fill the area where the rear bumper meets the body. This often damaged or missing part should be replaced to keep any water or other elements out...

Reproduction rear bumper cover for 1982-84 Pontiac Trans Am models. Painstakingly reproduced in durable high strength urethane with strict attention to detail, this bumper cover will replace your warped or missing cover...

OER Premier™ reproduction of the original chrome front bumper designed for use on 1947-55 Chevrolet and GMC pickup and sedan delivery models. This reproduction bumper is designed exclusively for the restorer who demands...

Original Equipment Reproduction - OER Premier™ When purchasing reproduction bumpers you can be sure that each and every product displaying the OER Premier™ symbol is manufactured correctly to exact specifications,...

Factory-style replacement lower rear bumper cover filler/support for all 1978-81 Camaro models, including Z28. This filler adds support for the urethane rear bumper cover in places where it tends to sag. Manufactured using...

OER Premier reproduction of the original chrome rear bumper designed for use on 1968-72 Chevy II and Nova models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer....

OER Premier™ reproduction of the original chrome rear bumper designed for use on 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This reproduction rear bumper is designed...

High quality reproduction of the original front bumper cover designed for use with 1982-84 Camaro Z28 models. Each bumper cover is manufactured using automotive grade urethane replicating the original design, ap[pearance, and...

OER® reproduction rear panel emblem designed for use on 1989-90 Camaro Rally Sport models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet Bow Tie...

Reproduction of the original chrome rear bumper set designed for use with 1961 Impala, Bel Air and Biscayne models. This quality reproduction is manufactured to factory specifications featuring a beautiful triple chrome...

OER Premier® reproduction of the original chrome rear bumper for 1954-55 Chevrolet / GMC stepside truck models. Replace that old worn out and pitted bumper with this all new reproduction. Note: Shipped double oversize....

OER Premier™ reproduction of the original chrome rear bumper designed for use on 1969 Camaro models. This "show quality" reproduction is considered the highest quality on the market. Features new tooling using triple...

Reproduction of the original front bumper impact strip designed for use with 1974-77 Camaro models. This OEM style bumper strip inserts into the face of the bumper. Designed and manufactured to factory specifications by...

Reproduction of the fiberglass front end lower bumper panel for 1976 Trans Am models. Does not include mounting studs.

Excellent reproduction of the original rear body to bumper weatherstripping designed for use on 1965-65 Chevy II and Nova models. The bumper to body seal strip is designed to seal and fill the area where the rear bumper meets...

High quality reproduction rear bumper cover for 1985-90 Camaro Z28 Models. Manufactured using OE quality urethane, this reproduction features all correct mounting points. Made in USA Note: Shipped double oversize. ...

Quality reproduction of the original front panel emblem designed for use on 1970-71 Firebird models. Manufactured in zinc die-cast metal to factory specifications replicaing the original in quality, fitment and appearance....

Replacement of the rearbumper filler panel for 1982-84 Pontiac Firebird/Trans Am models. Manufactured from fiberglass, this mounts underneath the bumper cover for support. Made in the U.S.A. Note: Shipped oversize .

Fiberglass nose conversion panel for 1970-73 Trans Am models. On 1970-73 models the factory nose was a heavy steel piece with a formed urethane covering that acted as the front bumper during impacts. This lightweight...

Reproduction front bumper cover for 1982-84 Pontiac Firebird/Trans Am models. Painstakingly reproduced in durable high strength urethane with strict attention to detail, this bumper cover will replace your warped or missing...

OER Premier reproduction of the original chrome front bumper designed for use on 1970-72 Nova models. This reproduction front bumper is designed exclusively for the restorer who demands the best the market has to offer....

Reproduction of the optional chrome grill guard designed for use on 1962-65 Nova and Chevy II models, this an excellent dress-up accessory item that installs in the front grill area and is manufactured in a bright chrome...

OER Premier™ reproduction of the original chrome front bumper designed for use exclusively on 1968 Camaro models. The OER Premier bumper is designed exclusively for the restorer who demands the best the market has to...

OER Premier® reproduction of the original chrome rear bumper for 1955-59 Chevrolet / GMC stepside pickup models. Replace that old worn out and pitted bumper with this all new reproduction. Note: Shipped double...

Correct reproduction of the original front end emblem designed for use with 1993-02 Chevrolet Camaro models. Each emblem is manufactured in quality injection molded acrylic to exact factory specifications. Designed to replace...

OER® reproduction of the original rear panel emblem designed for use on 1982-84 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...

Reproduction of the rear bumper cover for 1979-81 Trans Am models. Manufactured from urethane as original. Shipped double oversize.

Reproduction of the original chrome front bumper set designed for use with 1960 Impala, Bel Air and Biscayne models. This quality reproduction is manufactured to factory specifications featuring a beautiful triple chrome...

OER® reproduction of the original rear panel emblem designed for use on 1985-1987 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...

Replacement of the front bumper filler panel for 1982-84 Pontiac Firebird/Trans Am models. Manufactured from fiberglass, this mounts underneath the bumper cover for support. Made in the U.S.A. Note: Shipped oversi ze.