All Makes All Models OER Products - Body Components

Reproduction of the original outer door mirror bracket used to attach the outer door mirror base to the door. Can be used to install the mirror on all 1970-81 Camaro and Firebird standard models. For use with RH or LH door...

Reproduction of the original door hinge spring designed for use on various 1982-06 GM models including the popular 1982-92 Camaro and Firebird models. After just a few short years, the original door hinge springs will...

Reproduction of the original front license plate bracket designed for use on 1970-73 Camaro Rally Sport (RS) models (with split front bumper). This bracket is manufactured in stamped steel and features an EDP coating for rust...

This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...

Reproduction of the original passenger side Camaro/Firebird door vent glass designed to install same as original factory glass. Includes correctly drilled hole for vent glass handle. Designed for use with vehicles originally...

OER Reproduction of the original door hinge bolts designed for use with 1967 Camaro and Firebird cast door hinges. Correct OE style bolts with washers. 5/16-18" x 1-1/8". Set includes 18 hex head screws and 6 countersink flat...

Reproduction of the original zinc die-cast hood louvers for all 1967 Camaro SS models. Manufactured with OER® tooling to exact factory specifications. Features correct black paint scheme, chrome accents, correct size mounting...

Reproduction of the original molded vent window seals designed for use on 1968-72 Chevy II / Nova and X-Body, 2 door models. MEach weatherstrip is manufactured of durable rubber for an authentic appearance and original fit....

Reproduction of the original rear bumperette guards designed for use with 1969 standard Camaro models. These bumper guards attach to the rear bumper and extend downword below the rear bumper. This bumperette was a standard...

Reproduction of the original rear bumper brackets designed for use with 1969 Camaro models. Manufactured in quality high grade stamped steel replicating the original in quality and design. Each bracket features the correct...

OER reproduction of the original hood hinge spring designed for 1962 Impala and Full Size models including Bel Air and Biscayne. Sold individually. 2 Required per vehicle.

Correct replacement of the original front door rubber bumper designed for use on 1967-1969 Camaro and Firebird models. Each bumper is replicated to the original OE specifications and fits the door precisely. The bumpers will...

Reproduction of the original door vent glass assembly designed for use on 1967 Camaro and Firebird models. This complete vent glass window frame assembly is manufactured to exact factory specifications specifically designed...

The original style black fender to radiator support bars for 1967-69 models installs from the fenders to the radiator support on each side under the hood. These bars when installed, will help to keep the front sheet metal...

Reproduction of the original rear spoiler trunk hinge torque rod designed for use on 1970-81 Camaro models without rear spoilers. This torque rod is essential for keeping pressure on the trunk hinge assembly which will...

OER reproduction of the original front bumper stabilizer bushing designed for use on all 1967-76 Pontiac Firebird models. The rubber biscuit separates the front bumper from the mounting brace. Located between the fender...

Reproduction of the original outer door rear view mirror for use with various 1966-72 Chevrolet models. Each mirror is manufactured in die-cast zinc replicating the original in appearance, design and fitment. Featuring an...

Replacing the original bushings with OER® rubber reproductions is a sure fire way of maintaining originality and mounting the subframe exactly the way the factory intended. Each pre-packaged kit contains all shouldered...

Reproduction of the original door handle mechanism designed for use on various 1968-72 GM models. Manufactured using correct OE materials to factory specs for an exact replica of the original. This assembly is manufactured in...

The door mounted wedges are necessary to help keep the doors from sagging due to fatigue in the door frame structure which could cause permanent or irreparable damage to the body. The door mounted wedge will come in contact...

Reproduction of the original upper door hinge designed for use on various GM models including 1968 Camaro and Firebird models. Replace your original upper door hinge with this supurb quality OER® reproduction. Each hinge is...

Original style replacement outer door mirror for 1968-72 models. Each mirror features the correct style ribbed base with "dimple". Included is the correct style dog nose stainless retaining screw, door to mirror mounting...

Reproduction threaded inner door lock knob rod and bellcrank rod. These two rods are manufactured to original specifications with the correct contours and include the plastic clip that joins the two together. Fits the LH or...

Excellent reproduction of the original outer door mirror designed for use on various 1963-65 GM models. Each mirror is manufactured in quality zinc die-cast metal and chrome plated replicating the original in quality, fitment...

Correct reproduction of the original outer door mirror designed for use with various 1967-72 Chevrolet models. Each mirror is manufactured in die-cast zinc to factory specifications. Will fit and install as original. Features...

OER® reproduction of the original Trico RF-15 wiper blade insert/refill for 15" TRICO wiper blades. This period-correct TRICO RF-15 style insert is made with a stainless steel vertebra and a precision wiping edge produced...

Reproduction of the original style case hardened bolts designed for use on a variety of 1968-81 GM models. These replacement bolts are just what's needed when installing or replacing the lower door hinges. The set features 16...

Reproduction of the original case hardened bolts designed for use on various GM models. This complete set of bolts will allow attachment of the door hinges for both RH and LH upper door hinges. Includes bolts to attach the...

Reproduction of the original style rear spoiler designed for use with all 1969 Chevrolet Camaro and Pontiac Firebird models. Each spoiler is manufactured to OE specifications replicating the original in quality, appearance...

OER® reproduction of the original interior handle washer plate for use on most 1947-87 GM models without power windows. Manufactured in injection molded ABS plastic material as original, this plate prevents the window crank...

OER Premier™ reproduction of the original chrome front bumper designed for use exclusively on 1967 Camaro models. The OER Premier bumper is designed exclusively for the restorer who demands the best the market has to...

OER Premier™ reproduction of the original chrome rear bumper designed for use on 1969 Camaro models. This rear bumper includes the center rear bracket pre-installed making installation easier. The OER Premier bumper is...

OER Premier™ reproduction of the original chrome front bumper designed for use on 1967-68 Camaro models. The OER Premier bumper is designed exclusively for the restorer who demands the best the market has to offer....

OER® reproductions of the original windshield wiper armsdesigned for use on 1970-81 Camaro models with recessed wipers. Each wiper arm is manufactured from formed stamped stainless steel like original and includea satin black...

Reproduction of the original recessed style windshield wiper arms and blades for 1970-81 Camaros. Recessed wiper arms will drop down below the hood area near the windshield and are hidden from view when not in use. Includes 2...

Manufactured in quality zinc die-cast metal and chrome plated replicating the factory original bezel. Replace the old , worn out or rusted bezel with this quality reproduction. Will fit and install as original. Note: Refer to...

OER Premier™ reproduction of the original chrome front bumper designed for use exclusively on 1968 Camaro models. The OER Premier bumper is designed exclusively for the restorer who demands the best the market has to...

Replacing the original bushings with rubber reproductions is a sure fire way of maintaining originality and mounting the subframe exactly the way the factory intended. Each pre-packaged kit contains all shouldered rubber...

Authentic reproduction of the original Rally Sport split (2 piece) front bumper designed and manufactured to duplicate the original in virtually every detail. Manufactured to factory specifications featuring triple chrome...

Original Equipment Reproduction - OER Premier™ When purchasing reproduction bumpers you can be sure that each and every product displaying the OER Premier™ symbol is manufactured correctly to exact specifications,...

Reproduction of the original upper door hinge designed for use on 1961-64 GM full size models. Sagging and worn door hinges can cause damage to doors, locks and hinge pillar sheet metal. Why go through the hassle of...

Quality reproduction of the original front panel emblem designed for use on 1970-71 Firebird models. Manufactured in zinc die-cast metal to factory specifications replicaing the original in quality, fitment and appearance....

Reproduction of the original remote outer door mirror for use on various GM applications. Each mirror is reproduced to factory specifications in quality zinc die-cast metal with a bright chrome finish. Each outer door mirror...

Reproduction of the original outer door mirror designed for use on various 1968-72 GM models. Each mirror is manufactured in quality die-cast zinc replicating the original mirror in quality and fit. This reproduction mirror...

OER® reproduction of the original bumper bolt, washer and nut designed for use on 1947-72 Chevrolet/GMC trucks and 1938-54 Chevrolet passenger cars. Set features the correct chrome-plated carriage bolt with authentic style...

Reproduction of the original Mopar quarter window glass rollers for use on 66-70 B-body models. Manufactured from high quality injection molded material with precision machined and stamped steel components same as original....

OER® reproduction of the original window regulator designed for use with 1968-69 Camaro and Firebird models with standard interiors. Each regulator is manufactured to replicate the original in quality and design. The...

OER® reproduction of the original window regulator designed for use with 1968-69 Camaro and Firebird models with standard interiors. Each regulator is manufactured to replicate the original in quality and design. The...

Reproduction of the original windshield glass support designed for use on 1967-69 Camaro and Firebird models. This support is manufactured to OE specifications and used to position and support the windshield glass. When the...

Original style replacement outer door mirror for 1968-72 models. Each mirror features the correct style ribbed base with "dimple". Manufactured in zinc die-cast material replicating the original in every detail. Included is...

OER reproduction of the top rear binding end clip for most all GM convertible models. These stainless steel covers finish both ends of the rear window outer top bow binding trim strip. Sold as 1 clip with 1 screw. 2...

OER® reproduction of the original Arrowhead front bumper emblem designed for use on 1967-68 Pontiac Firebird 400 models. Each emblem is manufactured to replicate the original in quality and appearance. This version is...

OER® reproduction of the original door latch assembly designed for use with 1970-81 Camaro and Firebird models. The door latch is commonly worn out after many years of use. Replacing the latch can help the door to open...

When the Camaro body style changed in 1970, so did the rear spoilers-- there were now two designs instead of just one. There was a single version (low) for Z28 models, and a 3-piece (high style) version for all other models....

OER reproduction of the original chrome rear bumper designed for use on 1967-68 Camaro models. This rear bumper includes the center rear bracket pre-installed making installation easier. Features superior triple chrome...

Reproduction of the original windshield washer "F" style connector designed for use with 1963-70 Mopar A body models. Built to original specifications and features the correct coloration for an unmatched fit and appearance....

Reproduction seal that installs on the radiator support for 1967-69 Camaro and Firebird models with original factory air conditioning. Each hood seal is manufactured to replicate the original in design, quality and length. ...

OER® reproduction of the original hood louver ornaments / louvers designed for use on 1985-90 Camaro Z28 and 1987 IROC models. Each louver is injection-molded creating a reproduction that is identical to the original GM...

OER® reproduction of the original hood to fender rubber stoppers designed for use on 1967-72 Chevrolet and GMC truck models. These uniquely designed bumpers will replace the originals exactly offering years of service...

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...