All Makes All Models OER Products - Console Parts

Reproduction of the original shift plate designed for use on 1970-72 Camaro models with automatic transmissions. Each shift plate is manufactured in quality zinc die-cast material to correct factory specifications. Features...

Reproduction of the original console gauge oil line designed for use with various 1967-74 Buick, Chevrolet, Oldsmobile, and Pontiac small block models that included a console oil gauge. This oil line is required to allow the...

Reproduction of the original shift boot designed for use with 1969 Camaro and 1968-69 Firebird models with 4 speed Hurst shifters. Each shift boot is designed and manufqactured in quality EDPM rubber that matches the original...

Exact duplicate of the original shift plate seal which is precision die-cut from black polypropylene as original. The die-cut seal features a precision cut hole for the shifter opening. Applications: 1968-1968 Chevrolet...

This console gauge assembly screw kit contains enough screws and washers to assemble or reassemble a set of reproduction or original console gauges into the housing for 1968-69 Camaro with a floor console. Also includes 4...

Get the high performance look in your 1968-76 Chevy II / Nova with this complete, pre-assembled gauge cluster assembly. Reproduction of the original black-faced console gauge assembly designed for use on 1968-76 Nova models....

Reproduction of the original floor console assembly for use with 1969 Chevrolet Camaro models with console gauges. This reproduction console is manufactured to original factory specifications and replicates the original in...

Reproduction of the original console lamp reflector designed for use on 1968-69 Camaro models. After years of console lamp operation, the original console lamp reflector can wear out and no longer fully serve its purpose....

OER® reproduction of the original clip that was used for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower...

Reproduction of the original floor console assembly for use with 1969 Chevrolet Camaro models with console gauges. This reproduction console is manufactured to original factory specifications and replicates the original in...

Reproduction of the original shift boot retainer plate designed for use on 1967-69 Camaro, 1967 Firebird, and 1968-74 Nova models with manual transmissions, and 1969 3-speed with console shift boots (3974526). Each retainer...

Superb reproduction of the original console gauge base unit designed for use on various 1968-74 GM models including 1968-69 Camaro, 1968-74 Nova, 1971-74 Ventura, and 1974 GTO models. Each base is manufactured to correct...

Quality reproduction of the original shift plate lens designed for use with 1968-69 Pontiac Firebird models equipped with a TH350 or TH400 automatic transmission. Each lens is manufactured in injection-molded UV acrylic...

Quality reproduction of the original shift plate lens used on 1968-69 Firebird models equipped with a powerglide automatic transmission. Each lens is manufactured from quality UV acrylic replicating the original in design,...

Reproduction of the original rear console lamp lens specifically designed for use on 1968-69 Camaro consoles. Manufactured in quality injection-molded ABS replicating the original in quality and design. Will install in...

Reproduction of the original shift plate designed for use on 1969 Camaro models with automatic transmissions. Features the correct Cherrywood woodgrain insert where the grain runs vertically on the shift plate matching the...

Reproduction of the original floor shift plate designed for use on all 1967-68 Camaro 3 and 4-speed models without center console, and 1969 Camaro 3 speed models without center console. Shift plates are manufactured in...

OER® reproduction of the original console temperature gauge designed for use on 1967 Camaro or Firebird models that included the optional console gauge package. Each gauge is designed and manufactured to replicate the...

Exact reproduction of the zinc die-cast automatic console shift plate designed for use on 1969 Pontiac Firebird models with Powerglide transmissions. Features correct Burlwood design with bright chrome outer trim. Each shift...

Reproduction of the original console lid hinge designed for use on 1967 Camaro and 1967-69 Firebird models. Each hinge is manufactured in the correct gauge metal and comes in a matte black finish as original. It is also...

OER® reproduction of the original temperature gauge for use on 1968-74 Chevy II, Nova, 1971-74 Ventura, and 1974 GTO models that included the optional console gauge package. Each gauge is manufactured to exact...

Quality reproduction of the original console shift lens for use on 1964 Impala SS models with powerglide transmissions. Each lens is manufactured to factory specifications including the letters P-R-N-D-L. Will replace the...

Superb reproduction of the original console forward plate with special attention paid to matching the original walnut woodgrain pattern, correct for 1968 Camaro models. Each plate is manufactured in die-cast zinc and features...

We now offer #8 x 1" chrome sheet metal screws with integral washer. These screws were designed for use on many different components including, interior pillar post moldings, kick panels, rear side panels, interior door...

OER reproduction of the factory original leather-wrapped shift knob that will fit 1982-89 Camaro models but is correct for 1984-85 Z28 models. Each handle is manufactured in injection molded ABS plastic and then carefully...

Reproduction of the original floor console assembly for use with 1968 Chevrolet Camaro models with console gauges. This reproduction console is manufactured to original factory specifications and replicates the original in...

Correct reproduction of the original 4 speed shift boot plate in chrome. This high quality reproduction is produced in steel and will fit all 4 speed Chevy II models between 1962-67. Manufactured by OER.

Correct reproduction of the original style center console lid assembly designed for use on 1973-81 Camaro models. This superb reproduction is manufactured to factory specifications and includes correct grain vinyl material...

OER® reproduction of the original console fuel gauge designed for use on 1968-76 Chevrolet Nova models with the optional console gauge package. Each gauge is manufactured to exact factory specifications featuring a...

OER® reproduction of the original console fuel gauge designed for use on 1967 Camaro or Firebird models that included the optional console gauge package. Each gauge is designed and manufactured to replicate the original...

OER® reproduction of the correct mounting brackets designed for use on all 1970-72 Camaro center floor console assemblies. Includes the front, center and rear brackets for mounting the console to the floor. Each bracket...

OER® reproduction of the original shift plate slider retainer designed for use with 1968 Camaros with manual transmissions. The slider retainer is designed to mount the shift plate slider to the shift plate. ...

Exact reproduction of the original 1973-74 Nova console shift plate originally installed on all models originally equipped with an automatic transmission and center console. Although similar to the earlier design for 1968-72,...

Correct hardware required to mount the floor console to the floor pan on 1968-69 Camaro models. Includes the correct rivet nuts with generic bolts and washers for console installation. This hardware set can also be used to...

OER® reproduction of the original 3-speed shift pattern emblem designed for use with 1968-69 Camaros 3-speed manual transmissions. This shift pattern plate is manufactured in die-cast zinc and features correct 3-speed...

Reproduction of the original shift plate designed for use on 1970-71 Camaro models with 4/speed manual transmissions. Each shift plate is manufactured in quality zinc die-cast material to correct factory specifications....

Reproduction of the original console gauge mounting clips and hardware for various 1968-74 GM models. This hardware set includes four clips and four self tapping screws for mounting the gauge cluster to the plastic console...

Reproduction of the original shifter boot and bezel designed for use on 1966-74 Mopar A, B, and E- body models. Each shift boot is designed and manufactured in EPDM molded rubber compound replicating the original in fitment...

Reproduction of the original upper shift boot designed for use on 1968 Camaro models with 4 speed manual transmissions. Each shift boot is manufactured in quality EPDM rubber that replicates the original in design. For use on...

Reproduction of the original shift plate designed for use on 1963 SS Impala models with Powerglide transmissions. Shift plates are manufactured in quality zinc die-cast metal and features bright chrome plating and the...

Correct reproduction of the original style center console lid assembly designed for use on 1975-78 Camaro models. This superb reproduction is manufactured to factory specifications and includes correct grain vinyl material...

Reproduction of the original center floor console lid bracket designed for use on 1973-81 Camaro models. Each bracket is manufactured in stamped steel to original specifications. The bracket allows the console lid to...

Reproduction of the original Hurst-type shift boot retainer plate installed on various GM models including 1969 Chevrolet Camaro models with 4 speed Hurst shifters. Works with original or reproduction Hurst shift boots. This...

Reproduction of the original console cover plate designed for use on 1973-81 Camaro and 1970-81 Firebird models. Manufactured in quaility injection-molded ABS to factory specifications. Features correct grain that matches the...

Quality reproduction of the original console gauge bezel for use with 1968-69 Camaro, 1968-74 Nova, 1971-74 Ventura, and 1974 GTO models. This bezel is manufactured in injection-molded ABS replicating the factory original in...

Reproduction of the original console door bracket arm designed for use on 1968-69 Camaro models. Each arm is manufactured in stamped steel and replicate the original including correct configuration and mounting points. This...

Reproduction of the original-style voltmeter designed for use on 1968-74 Nova models with console gauges and other variuous GM models as listed. The original console gauge package included an ampmeter, not a voltmeter. This...

Reproduction of the original console shift plate designed for use on 1975-79 Nova models with a automatic transmission. Manufactured in stamped aluminum offering an original and authentic appearance. Will install on original...

Reproduction of the original chrome sheet metal screws designed for various applications on 1960's, 1970's and 1980's models where #8 x 1-1/2" chrome screws were applied. Each screw replicates the original in appearance and...

Reproduction of the original silver-face pre-assembled console gauge assembly for use with 1968-69 Camaro models with factory consoles. This fully pre-assembled and ready-to-install console gauge cluster features the...

Reproduction of the original console shift plate slider designed for 1966-76 Mopar A-Body, and 1966-70 B-Body models. Manufactured in ABS plastic to original specifications. Replace the old or worn out shift plate silder in...

Reproduction of the original shift plate seals designed for use on 1968-72 Chevelle models with automatic transmissions. These seals are manufactured from die cut high grade rubber and will fit as original. 4 piece set. ...

Reproduction of the original console lid door that was installed on all 1967 Camaro and Firebird center console assemblies. Manufactured in stamped steel including an attached stop bracket. This authentic reproduction...

Correct reproduction of the original style center console lid assembly designed for use on 1973-81 Camaros and 1970-81 Firebird models. This superb reproduction is manufactured to factory specifications and includes correct...

OER reproduction of the original automatic console shift plate designed for use on 1969 Pontiac Firebird models with Turbo Hydromatic transmissions. Manufactured in zinc die-cast metal replicating the original in quality and...

OER reproduction of the original seat belt clips for use with various 1967-69 Chevrolet models. These console seat belt clips attach to the side of the factory console and used to retain the seat belt buckle assembly when the...

Reproduction of the original connectors used to mount the wires to the back of the console gauges on 1968-69 Camaro, 1968-74 Nova, 1971-74 Ventura, and 1974 GTO models . Includes connectors for all 4 console gauges. The gauge...

Injection molded reproduction of the original clear acrylic console shift plate lens designed for use with 1968-69 Camaro models with a TH350 or TH400 automatic transmissions. Each lens is manufactured to correct factory...

OER® reproduction of the original console shift plate designed for use on 1970-81 Firebird models with auto trans. Manufactured in injection molded ABS to exact factory specifications. Features P-R-N-D-S-L letters on shift...

OER® reproduction of the original console oil pressure gauge designed for use on 1968-69 Chevrolet Camaro models with the optional console gauge package. Each gauge is manufactured to exact factory specifications...