All Makes All Models OER - Fuel System

Reproduction of the original accelerator pad, bezel and hardware designed for use on Dodge and Plymouth A, B and E-body models. This injection molded ABS accelerator pedal pad set includes the pedal pad, stainless steel...

Reproduction of the original accelerator pedal bezel designed for use on various 1971-72 Reproduction of the original accelerator pad bezel designed for use on Mopar A,B,C-Body and E-Body models. Each accelerator pedal bezel...

Reproduction of the original carburetor to accelerator lever cable designed for use with 1970 Camaro (4 bbl), 1971-73 models with (350 4 bbl.), 1970-72 Chevelle (with high performance 396, 454). Each cable is manufactured to...

Reproduction of the original style fuel tank designed for use with 1967-68 Camaro and Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating offering long...

OER® reproduction of the original driver and passenger side tail lamp lens set with fuel door for 1979-81 Firebird Trans Am models. Meticulously manufactured to exact specifications, each injection molded lens is designed to...

OER® reproduction of the original accelerator firewall bushings designed for use on various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive...

OER® reproduction of the original fuel door emblem designed for use on 1980-81 Camaro Z/28 models. Each emblem is manufactured in injection molded ABS replicating the original dark to light tri-color fading emblem...

Reproduction of the original fuel filler neck to trunk floor seals designed for use on 1967-69 Barracuda, Dart, Valiant and 1969 Swinger models. Designed to keep out fumes and road debris that could enter the fuel area, each...

Reproduction of the original style stamped steel accelerator pedal pad to rod support unit. This steel reproduction is manufactured to replicate the original in appearance, design and functionality. Includes correct style...

OER reproduction of the original fuel tank filler neck grommet for use on 1967-70 Chevrolet and GMC truck models. Manufactured from durable rubber for years of use, this grommet secures the fuel filler neck at the cab....

Beautiful high quality reproduction of the original fuel door emblem designed for use on 1968 Firebird models. Manufactured in quality zinc die-cast metal with correct chromed outlines with black and red wings. This chrome...

Replace all the necessary components for your 1969 Camaro or Firebird with OER® fuel tank kit. Each kit provides the individual components needed to replace you leaking or damaged fuel tank. Kit includes: Zin c-Coated...

Correct reproduction of the original fuel tank designed for with 1969 Camaro and Firebird models. This reproduction fuel tank is manufactured in original style Nitern coated steel and includes the fuel sender lock-ring and...

Reproduction of the original black fuel door emblem originally installed on 1979 Camaro Z28 models. Manufactured in zinc die-cast chrome plated metal along with an injection molded insert featuring the black and silver...

Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...

Replace all the necessary components for your 1967-68 Camaro with OER® fuel tank kit. Each kit provides the individual components needed to replace you leaking or damaged fuel tank. Kit includes: Stainless Ste el Fuel...

Reproduction fuel filler neck hose and vent hose set with clamps, for our replacement fuel tank, part # FT4018A. This installation set includes: fuel filler neck hose, fuel neck vent hose, and 4 clamps to use to attach the...

Reproduction of the original fuel tank sending unit designed for use with 1967 Chevrolet Camaro, and 1967-68 Firebird models with 3/8" single line. After years of use, your fuel sending unit can wear out. When that happens,...

Reproduction stamped steel fuel tank, manufactured to factory specifications and finished in a zinc coating for corrosion resistance. Replaces OE # 3967755. Competitor Interchange # GM33F. Specifications: Zinc-Coating...

Correct replacement of the original fuel tank sending unit gasket for use on various 1961-81 Buick, Chevrolet, Oldsmobile, and Pontiac models. This gasket installs between the sending unit and the locking ring. Gasket is...

Reproduction of the original accelerator pedal for 1973-74 Barracuda, 'Cuda and Challenger models. Manufactured with the correct details and grain texture for an authentic appearance. Includes pedal and hardware. Mopar...

Reproduction of the rare optional 1967-68 "SS 350" gas cap finished in black krinkle finish with a beautiful outer chrome edge replicating the original in every detail. The center of the cap features the "SS-350" emblem in...

Each kit provides the individual components needed for a complete replacement. Fuel tank sending units are sold separately due to differences in engines, options, etc. Note: Shipped double oversize. Discount exem pt. ...

Reproduction ofg the original style fuel tank to filler neck rubber grommet designed to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction...

Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...

Reproduction of the original fuel filler neck grommet designed for use with various 1964-74 Dodge and Plymouth models. Eliminate vapor or fuel leaks by replacing the fuel filler neck grommet. Manufactured from OE materials...

Reproduction fuel sending unit for 1978-81 Corvette models. Sending units include lock ring, seal o-ring and strainer. {fitment}

Reproduction stamped steel fuel tank, manufactured to factory specifications and finished in a zinc coating for corrorion resistance. Replaces OE # 3819506. Competitor Interchange # GM33A. Specifications: Zinc-Coating...

Reproduction stamped steel fuel tank, manufactured to factory specifications and finished in a zinc coating for corrosion resistance. Comes with lock ring gasket and (5) screws for sender (fuel sender sold separately)....

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...

Correct reproduction of the original fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed....

Reproduction fuel tank mounting lock nuts for various 1960-76 Mopar models. Sold in pairs. Zinc plated, 3/8" - 16, 9/16" outer. Fuel tank mounting studs (J bolts) sold separately. Use part# MM8271 fuel tank mounting studs. ...

Reproduction of the original fuel tank sending unit designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne station wagon models with 5/16" line. Each sender is produced in quality steel to resist corrosion...

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth A body models with 383, 440 engines. Each cable is manufactured to correct factory specifications replicating the original...

The most accurate reproduction fuel tank sending unit in the industry, with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original....

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van ...

This is the complete accelerator pedal assembly which extends from the firewall on all V8-equipped vehicles with cowl induction. This assembly comes complete with the accelerator pedal, pedal mount pin and spring, accelerator...

Reproduction of the original throttle cable designed for use on 1968-72 Dodge and Plymouth A Body models as listed. This reproduction throttle cable is designed for use with 273/318/340 engines. Connects the accelerator...

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth B and E body big block (400, 426, 440) models as listed. Each cable is manufactured to correct factory specifications...

This special mounting pin is just what you need to correct a loose accelerator pad. This special design allows the pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems commonly...

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Reproduction of the original thrittle arm designed for use on 1969 Camaros that included the cowl induction hood. This is a correct reproduction of the original GM throttle lever arm. Manufactured to factory specifications in...

Each kit provides the individual components needed for a complete replacement. Fuel tank sending units are sold separately due to differences in engines, options, etc. Note: Shipped double oversize. Discount exem pt. ...

Reproduction accelerator cable designed for use with 1967 Camaro, Firebird (6 and 8 cyl), 1968-69 Camaro, Firebird (6 cyl), 1967 Chevy II Nova (6 or 8 cyl), 1968-72 Nova (6 cyl) models. A faulty cable can lead to problems...

Reproduction of the original fuel door tension spring designed for use on 1967-68 Firebird models. This spring is used to keep tension on the fuel filler door. Replacing this often damaged or broken spring will help ensure...

Reproduction of the original pedal pads designed for use on 1976-81 Camaro, Firebird and various other GM models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual...

Reproduction of the original accelerator pedal pad designed for use on 1962-65 Dodge and Plymouth models. This quality reproduction is manufactured with an OEM style embedded steel core offering an authentic appearance and...

Reproduction of the original accelerator pedal pad designed for use on various Chrysler, Dodge and Plymouth A, B, C, and E-body models. This injection molded ABS pedal pad is an accurate reproduction of the original pad...

Replace all the necessary components for your 1967-68 Camaro with OER® fuel tank kit. Each kit provides the individual components needed to replace you leaking or damaged fuel tank. Kit includes: Zinc-Coated F uel Tank...

Correct wing nut used with all carburetors with 1/4" carburetor studs. After years of use your original air cleaner can become rusted or broken. This wing nut is the perfect replacement for a rusty or damaged original. Fits a...

This is a correct reproduction of the threaded stud used on models equipped with Cowl Induction System. The stud consists standard SAE thread and is coated in clear zinc for corrosion resistance. This stud is used for all...

Reproduction air cleaner lid seal designed to seal between the lid and the base for various applications. {specs}

Reproduction of the original pedal pads designed for 1969 Firebird models. This pedal pad set is designed to replace the worn out original pads for 1969 Firebird models with manual transmission. Replacing the pedal pads will...

Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....

Carburetor air cleaner stud for use on various GM models with Rochester or Carter carburetors. The stud is standard SAE thread and is coated in black zinc for corrosion resistance. Stud measures 1/4"-20 x 2-5/16" with stud is...

Reproduction of the original fuel tank sending unit designed for use with 1967-68 Chevrolet Camaro and Firebird models with 3/8" line and 1/4" vent. After years of use, your fuel sending unit can stop working properly. When...

Reproduction of the original throttle arm designed for use on 1968-69 Camaro models. Each throttle arm is produced to replicate the original in quality and fit. Replace your worn out or damaged original throttle arm with this...

Reproduction of the original Bow Tie fuel door emblem originally installed on 1978-79 Camaro models. Manufactured in die-cast chrome plated zinc along with an injection molded insert featuring the red, white and blue colors...

Reproduction of rear panel fuel door cover for 1979-81 Firebird models. Features smoke lens and is produced without the recess area for models without the Firebird emblem on the fuel door. Each injection molded fuel door is...

Reproduction of the original pedal pads and trim plates for use on 1970-71 Camaro Z/28 models. This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z/28 models with drum brakes and automatic...