All Makes All Models OER Products - Body Gaskets & Seals

Correct reproduction of the of the original U-shaped rubber door jamb rubber seals designed for use on 1961-64 GM Impala 2 door hardtop models. Each U-shape seal is manufactured to original specifications including a steel...

OER® reproduction of the original door rubber bumpers designed for use on 1964-1986 C/K and 1987-91 R/V model Chevrolet and GMC pickup trucks. Each rubber stopper is designed to exact factory specifications for a perfect...

Reproduction ofg the original style fuel tank to filler neck rubber grommet designed to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction...

Replace the old splash aprons with this quality reproduction and keep your engine compartment clean and free of water, salt, and other road debris. Each splash apron set is designed to fit as original ensuring a complete seal...

Reproduction of the original hood to cowl seal weatherstrip designed for use on 1991-96 Chevrolet Caprice and 1994-96 Impala models. Each hood seal is manufactured from durable rubber in the original configuration for a...

Reproduction of the original style body and trunk rubber plug designed for use on most 1960-76 Dodge or Plymouth models where a 1-7/8" hole plug is required. Manufactured in quality rubber material for an original appearance,...

OER® reproduction of the original hood to cowl seal for all 1967-72 Chevrolet and GMC trucks, Suburbans, 1969-72 Blazer and 1970-72 Jimmy models. Manufactured in the correct configuration for an authentic replacement of...

Reproduction tail lamp-to-quarter panel filler weatherstrip seal set for 1982-92 Chevrolet Camaro. Each set of hockey stick shaped molded rubber fillers fill the gap between the quarter panel and the tail lamp lens on both...

Reproduction of the original upper fuel neck rubber sleeve designed for use on 1967-68 Pontiac Firebird models. This reproduction rubber sleeve surrounds the gas tank neck and protects against gasoline, water or other...

Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...

OER® reproduction of the original front fender welting that seals the fender to the body on 1947-59 Chevrolet and GMC truck models. This welting is essential when replacing the fenders, or simply restoring the weatherstrip...

Reproduction of the original hood to cowl seal weatherstrip for use on 1967-76 Mopar A-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....

Correct reproduction of the original door jamb U shape rubber seals that install on 1962-65 Chevy II and Nova 2 door hardtop and coupe models. Each U shape rubber seal is manufactured to the correct configuration and hole...

Correct reproduction of the original outer door bullet mirror gasket designed for use on various GM models. This gasket separates the mirror base from the outer door metal. For use with bullet style mirrors in the various...

Reproduction of the original side marker lamp gaskets designed for use with 1970-71 Dodge Challenger models. Each gasket is manufactured to correct factory dimensions and laser cut to original specifications for a proper fit....

A complete set of reproduction gaskets designed for use on 1967 Camaro models. Each gasket is a replication of the original and replaces the outer body gaskets for the door handles, rear tail lights, outer mirror gasket,...

Reproduction of the original fuel filler neck grommet designed for use with various 1964-74 Dodge and Plymouth models. Eliminate vapor or fuel leaks by replacing the fuel filler neck grommet. Manufactured from OE materials...

Supplimental paint seal set designed for use on 1967-68 Camaro Rally Sport models. Set includes the front park lamp to body gaskets and back-up lamp to body gaskets. Each gasket replicates the original design for an authentic...

Quality reproduction of the original hood to cowl weatherstrip seal that attaches to the cowl panel and seals the area between the hood and windshield. This correctly configured seal is manufactured to exact specifications...

Reproduction of the original tail lamp gasket designed for use on all 1978-81 Camaro models. The gasket is manufactured in molded rubber ensuring a quality replacement. The gasket acts as a cushion between the tail light...

Reproduction hood bumper set for 1973-81 Chevrolet and GMC truck models. Set includes: six - hood side bumpers and two - hood adjuster bumpers.

Reproduction of the original firewall grommet designed for use with 1968-69 Camaro models with the Rally Sport hidden headlight option. Manufactured in quality EPDM rubber replicating the original in design and fitment. This...

Replace your old splash aprons with new reproductions and keep your engine compartment clean and free of water, salt, and other road debris. Manufactured by OER, each superior reproduction splash apron set is designed to fit...

OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...

Correct reproduction of the original U-shape rubber molded weatherstrip seal originally installed on 1969-70 Impala Custom, Caprice and convertible models. This seal attaches to the door jamb area under the quarter window...

Reproduction of the original inner splash apron set designed for use on 1967-68 Camaros. The splash shields are important in maintaining the seal between the fender skirt and engine bay. Replace the old and worn out splash...

Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...

Reproduction of the original roof rail weatherstrip designed for use on 1967-68 Impala 2 door Fastback, Wildcat, Le Sabre, and various GM models as listed below. This quality reproduction weatherstripping is manufactured in...

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

Correct reproduction of the original standard outer door mirror gasket originally installed on all 1970-81 models with chrome mirrors. Manufactured in injection molded ABS to factory specifications. Fits left or right hand...

Reproduction of the original quarter window vertical weatherstripping designed for 1958-64 Impala, Bel Air, Electra, Le Sabre, El Dorado, and other Full Size GM models as listed. This high quality reproduction is manufactured...

Reproduction of the original upper door weatherstrip seal for use on 1967-72 Chevrolet and GMC truck models. Replace the rotted or damaged upper window weatherstrip with these quality replacements. Help eliminate noise and...

Reproduction of the original tail lamp lens gaskets designed for use on 1966 Impala models. Each gasket is die-cut to exact specifications ensuring the correct and proper fitment between the lens and housing. Includes a...

Reproduction of the original steering column floor seal designed for use on 1961-64 Impala and GM Full Size models. Each seal is designed to replace the original and includes correct mounting points for installation....

Reproduction of the original rear hood outer corner rubber seals designed for use on 1991-96 Chevrolet Impala and Caprice models. Manufactured from durable rubber, each rubber seal is molded to exact specifications and will...

Replace the original splash aprons on your inner fender wells with this reproduction and keep your engine compartment clean and free of water, salt, and other road debris. Manufactured by OER, each superior reproduction...

1958-1958 Chevrolet Impala (2 or 4 door hardtop / convertible) 1958-1958 Chevrolet Bel Air (2 or 4 door hardtop / convertible)

Reproduction of the original die-cut rear tail lamp gaskets designed to replace the old or worn out originals on 1966 Impala models. These gaskets seal the tail light lens to the tail lamp housing assembly. Includes 6...

Correct molded reproduction of the original vent frame weatherstripping designed for use on 1967 Camaro and Firebird models. Designed and manufactured to exact factory specifications, each weatherstrip will replace the...

Reproduction of the original fender skirt rubber seal designed for use on various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment and appearance....

Reproduction of the original door handle gasket designed for use on various 1970-88 GM models. This gasket inserts on the back of the outer door handle and acts as protection between the handle and the paint. Sold...

Reproduction of the original weatherstripping designed for use on 1982-92 Camaro and Firebird models. This weatherstrip attaches to the plastic corner filler at the front of the side windows on all 1982-92 models. Each...

This reproduction gasket set includes a complete set of door handle gaskets used to install the outer door handles on the various models listed below. Each set includes correct die-cut gaskets for both RH and LH outer door...

Authentic reproduction of the original hood to cowl seal designed for use on all 1982-92 Camaro and Firebird models. Each weatherstrip seal is manufactured in the correct cofiguration and features the proper "push-in" style...

Correct reproduction of the original style weatherstripping which attaches to the cowl top vent grill and seals the area between the hood and the cowl panel. This is a correct reproduction of the original seal that includes...

Reproduction of the original hood to cowl seal weatherstrip designed for use on 1991-96 Chevrolet Caprice and 1994-96 Impala models. Each hood seal is manufactured from durable rubber in the original configuration for a...

Superb quality reproduction of the original side quarter window vertical weatherstrip designed for use on all 1967-69 Camaro and Firebird models. Manufactured in quality EPDM rubber to exact factory dimensions. These...

Reproduction of the original door actuator rubber boot designed for use on 1968-69 Camaros with concealed headlamps. This rubber boot is designed to protect the vacuum actuator assembly. 2 required per vehicle. Applications...

High quality reproduction of the original Hurst style T-top weatherstrip designed for 1978 Camaro, and 1976-78 Firebird models. This weatherstrip was installed on 1976 to 1st design 1978 models. Manufactured from molded and...

OER® reproduction of the original console seal cover originally installed on 1967 Camaro, 1967 Firebird or 1968-72 Chevy II/Nova models with a factory 3 or 4-speed manual transmission. Each seal is manufactured to exact...

Reproduction of the original hood louver gaskets that seals the hood louvers to the hood. These special gaskets are manufactured to precisely replace the old or worn originals. Prevents water and other elements from seeping...

Reproduction of the original hood to cowl weatherstrip seal designed to keep water, dirt, and other debris out of your engine compartment. This reproduction is manufactured in the correct configuration allowing the seal to...

Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...

Reproduction of the original roof rail weatherstrip designed for use on 1970-81 Camaro and Firebird coupe models. These quality weatherstrips are manufactured to the correct factory configuration and seal the area between the...

Reproduction of the original die-cut rear tail lamp gaskets designed to replace the old or worn out originals on 1967 Impala models. These gaskets seal the tail light lens to the tail lamp housing assembly. Sold in pairs. ...

Reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1970-81 Camaro and Firebird models. Manufactured in the correct configuration which allows easy installation when replacing...

Correct OER® reproduction of the original trunk lock bezel molded rubber gasket for use with all 1970-73 Camaro models. This molded gasket is used to seal the trunk lock bezel and help keep water and other elements from...

Excellent reproduction of the original body seal strip designed to seal and fill the area where the rear bumper meets the body. This often damaged or missing part should be replaced to keep any water or other elements out...

Reproduction of the original style components required to replace and mount the outer door mirror on the door. Contains all the necessary hardware to install a standard outer door mirror onto either the drivers or passenger...

Reproduction of the original style weatherstrip clip receiver seal designed for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert...