OER Parts Restoration Parts and Accessories - Transmission

Reproduction transmission torque convertor cover designed for use with various Pontiac models with 301, 350P, 350W, 400, 455, 4.3S, 4.9T with TH350 or TH400 automatic transmissions. Each cover is manufactured in quality...

The lower kickdown rod which was used on 1967-1972 Camaro models with factory installed V8 engines and Powerglide transmissions, is a commonly forgotten link in your vehicles drive train. This rod mounts between the...

This 1965-70 transmission crossmember support is an exact reproduction of the original. It features correct contours, shape, & stampings. Sometimes referred to as a support brace, it's the steel crossmember underneath the...

This chrome plated dip stick with tube for the GM hydro-matic transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper installation. ...

Reproduction cast iron transmission mount to fit a variety of 1961-65 Ford and Mercury 6 cylinder and V8 engines. For use with automatic or manual transmission on models produced after 4/16/61. Ford Applications: 1960-65...

This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...

Replacement brass radiator fittings for 1964-73 Mustang models. These 1/8" fittings thread into the radiator and act as connecting points for the transmission coolant lines. Sold in pairs. Applications 1964-1973 Ford Mustang

OER reproduction of the one-piece standard shift plate and tunnel originally installed on all 1973-74 Nova models with a manual transmission and center console. Manufactured in die-cast zinc material just like the original....

Reproduction of the original GM shift boot and plate retainer for use on all 1967-70 Chevrolet Camaro models 4 speed manual transmissions without a floor console. This retainer is manufactured in stamped steel and used to...

OER® Authorized reproduction of the original transmission crossmember designed for use on 1970-74 Camaro and Firebird with Turbo 400 Transmissions. The Turbo 400 crossmember is a must for models being converted from...

Reproduction of the original transmission cover plate designed for use with 1947-55 Pickup truck models with a 4 speed transmission. Manufactured in quality stamped steel replicating the original design for an authentic fit...

Reproduction of the original transmission crossmember designed for use on models originally equipped with a Turbo 400 transmission and a big block engine. This reproduction is manufactured in quality stamped steel ensuring an...

OER® Authorized reproduction of the original transmission crossmember designed for use on 1970-74 Camaro and Firebird models with Turbo 400 Transmissions. The Turbo 400 crossmember is a must for models being converted...

This chrome plated dipstick with tube for the GM turbo hydromatic 350 transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper...

These chrome plated dipsticks with tubes for GM hydramatic transmissions are of OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper installation. ...

Reproduction of the original transmission crossmember designed for use on 1967-69 Camaro and Firebird models with small blo, powerglide, TH-350 and 4/speed models. This exceptionally crafted reproduction will replace the old,...

Reproduction of the original transmission crossmember for 1967-69 Camaro and 1968-74 Nova models big block engines and 4 speed transmissions. This stamped steel reproduction is manufactured to OE specifications and replicates...

Precision reproduction of the bellcrank assembly, also known as the clutch cross shaft, for all 1962-64 Chevrolet full size models with V8 and manual transmission (except models equipped with 348ci or 409 ci engines). Does...

You will have flexibility with this transmission dipstick designed for use with GM Powerglide transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. ...

Replacement back-up lamp switch wire harness retaining clip for models with a muncie transmission. This clip mounts the reverse back-up lamp switch wire harness to the bellhousing. This is an exact reproduction of the...

Reproduction center transmission mount crossmember with factory style holes for connecting the LH and RH frame rails at the center of the frame and providing a place to mount the transmission. A good way to replace a damaged...

OER® reproduction of the original shift cable designed for use with 1968-72 Camaro and Chevelle models with automatic transmissions. Each cable is manufactured to replace the old or damaged cable assembly. Includes boot...

Reproduction of the original transmission cover plate designed for use with 1947-55 truck models with a 3 speed manual transmission and column shift. Each cover plate is manufactured in stamped steel to original factory...

Chemicals, excessive movement and overall time in general can take it's toll on one of the most crucial components of your driveline, the transmission mount. Once available only in degradable rubber compound, this mount is...

OER® reproduction of the original style transmission throttle valve cable designed for use with various 1976-80 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. models with TH350 automatic transmissions. Each...

You will have flexibility with this transmission dipstick designed for use with Chrysler A904 transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. ...

OER reproduction of the original floor shift boot manufactured in quality molded rubber replicating the original GM boot in authenticity and fitment. Originally installed on all 1967-68 Camaro models with 4 speed trans, 1969...

Reproduction of the original 1969-70 Mustang chrome shift boot retainer bezel designed for use on 3/speed and 4/speed non-console models with manual transmissions. The bezel is mounted at the base of the floor, and holds the...

This kit cures the addition of the engine side mount and upgraded transmission transplant. Engine mounts will accommodate both small and big block and are available in stock locations or 3/4" forward for those running an HEI...

Correct reproduction brake and clutch pedal pad trim plate for various 1967-81 GM models with manual transmission. Each steel pedal trim plate is designed to replicate the original in fit, appearance and design. {specs} ...

A shifter rod designed to allow the use of a Powerglide shifter rod linkage with a TH350 transmission. This special kit converts a floor shift powerglide to a floor shift Turbo 350/400. Includes a shift rod and bracket. Use...

Reproduction of the original shift cable designed for use with 1973-81 Camaro and 1970-81 Firebird, 1968-72 Tempest, LeMans, GTO, Grand Am, Catalina, Bonneville, and Grand Prix models with automatic transmissions. Each cable...

OER® reproduction transmission cable bracket for TH400 transmission. Applications: Buick: 1977 Regal with console Chevrolet Cars: 1973-74 Camaro with console 1974-75 Chevelle Oldsmobile: 1976-77 Cutlass with console ...

Reproduction of the original clutch linkage bell crank nylon wear washer designed for use with various 1962-76 Dodge and Plymouth A, B and E-Body models. Manufactured to original specifications in quality injection molded...

Reproduction automatic transmission shifter cable for 1982-87 Buick Regal and 1982-88 Oldsmobile Cutlass models. This 26-inch long cable is a direct replacement for console shift G-Body models. Replaces GM part# 22519497. ...

OER® reproduction of the original transmission kickdown control cable designed for use with various 1968-77 Buick, Chevrolet, Pontiac, and Oldsmobile models with TH-350 automatic transmission with 6 cylinder. Each cable...

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...

Transmission crossmember and mounts for installing a TH350, TH400, 700R, 200R, and 4L60, and 4L60E automatic transmission in your early model pickup. This 3 piece heavy-duty construction adds the support you need when...

OER® reproduction of the original transmission control cable bracket that holds the transmission control cable for 1973-81 models with automatic transmissions and a center console. This steel bracket mounts to the drivers...

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...

Quality reproduction of the original speedometer cable designed for use with various 1973-91 Chevrolet and GMC Pickup, Blazer, Suburban, and Jimmy models. This complete speedometer cable assembly is manufactured to correct...

OER® reproduction of the original brake or clutch pedal pad for 1947-55 Chevy and GMC truck models. Manufactured to exact specifications and includes correct configuration for originality. Fits 1955 (1st design) models....

Reproduction of the original lower speedometer cable designed for use with various 1953-1990 GM models as listed. Each cable is designed and manufactured to replicate the original in functionality. This cable measures 55" in...

Reproduction brake and clutch pedal pad for various 1958-63 Chevrolet models with manual transmissions. Each pedal pad is manufactured in EPDM rubber to factory specifications and replicates the original in quality and...

Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...