OER Parts Restoration Parts and Accessories - Automatic Trans

Reproduction of the original shifter base designed for use with 1970-72 Chevrolet Camaro models equipped with a center floor console and a horseshoe shifter. Each base is manufactured in stamped steel to factory...

OER® reproduction of the original automatic shifter assembly for all 1968-69 Camaro models equipped with Turbo-350 or Turbo-400 automatic transmissions. Features chrome plated shifter handle and correct base for an exact...

Reproduction of the original shifter boot and bezel designed for use on 1966-74 Mopar A, B, and E- body models. Each shift boot is designed and manufactured in EPDM molded rubber compound replicating the original in fitment...

OER® reproduction transmission cable bracket for TH400 transmission. Applications: Buick: 1977 Regal with console Chevrolet Cars: 1973-74 Camaro with console 1974-75 Chevelle Oldsmobile: 1976-77 Cutlass with console ...

OER® reproduction of the original shift cable designed for use with 1968-72 Camaro and Chevelle models with automatic transmissions. Each cable is manufactured to replace the old or damaged cable assembly. Includes boot...

Reproduction of the original shift cable designed for use with 1973-81 Camaro and 1970-81 Firebird, 1968-72 Tempest, LeMans, GTO, Grand Am, Catalina, Bonneville, and Grand Prix models with automatic transmissions. Each cable...

OER® reproduction of the original transmission control cable bracket that holds the transmission control cable for 1973-81 models with automatic transmissions and a center console. This steel bracket mounts to the drivers...

OER® reproduction of the original transmission kickdown control cable designed for use with various 1968-77 Buick, Chevrolet, Pontiac, and Oldsmobile models with TH-350 automatic transmission with 6 cylinder. Each cable...

Reproduction of the original chrome-plated shift lever for use with various 1969-1973 Mustang and Cougar models equipped with automatic transmission. Comes with new cable, bushings and internal mechanisms. Ford...

This chrome plated dip stick with tube for the GM hydro-matic transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper installation.

These chrome plated dipsticks with tubes for GM hydramatic transmissions are of OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper installation.

Reproduction of the original shift lever bezel designed for use on 1971-73 Mustangs with automatic transmissions. This show quality shifter bezel mounts on the carpet where the shifter lever comes through the floor. Black...

Reproduction shift knob for 1947-53 Chevrolet and GMC trucks. This knob is designed to replicate the original in every detail. Will fit and install as original. For use with 3-speed or automatic transmission vehicles with...

Reproduction shift knob for 1947-53 Chevrolet and GMC trucks. This knob is designed to replicate the original in every detail. Will fit and install as original. For use with 3-speed or automatic transmission vehicles with...

Reproduction of the original shift cable designed for use with 1968-69 Firebird models with automatic transmission. Each cable is manufactured to replace the old or damaged cable assembly. Includes boot and OE style...

Correct OER® reproduction of the original gearshift knob button that inserts into the shift knob. Manufactured with injection molded ABS to exact factory specifications. Once button is installed and pressed, will allow...

Reproduction of the original shifter base designed for use with 1968-69 Chevrolet Camaro models equipped with a center floor console and a horseshoe shifter. Each base is manufactured in stamped steel to factory...

Reproduction of the original gearshift button designed for use on 1984-86 Camaros and 1982-88 Firebird models with automatic transmission. This is a correct reproduction from OER® of the button that inserts into the shift...

Stainless steel transmission kick-down cable that fits TH350 transmissions with carburetor kick-down cable. Designed for 4 barrel-type carburetors and small block Chevrolet engines. Includes extender for more versatility in...

Reproduction of the original stamped steel shift lens backing plate designed for use on 1968-69 Camaro consoles with auto trans. This backing plate fits under the automatic transmission shift indicator lens on all 1968-69...

Reproduction of the original chrome-plated shift lever for use with various 1964-68 Mustang and Cougar models equipped with automatic transmission. Comes with new cable, bushings and internal mechanisms. Ford Applications:...

Reproduction of the original shifter slider plate designed for 1971-74 E-Body and 1971-74 B-Body Mopar vehicles equipped with an automatic transmission and center console. Each slider plate is manufactured to correct...

Correct OER® reproduction of the original gearshift control knob installed on all 1973-81 Camaros with automatic transmissions. Each gearshift knob is manufactured to correct factory specifications and designed for use...

Reproduction of the original Shifter Assembly for use with 1967-68 Mustang and Cougar models equipped with and automatic transmission and factory floor console. Each Shifter Assembly is constructed in stamped steel with...

OER reproduction of the factory original leather-wrapped shift knob that will fit 1982-89 Camaro models but is correct for 1984-85 Z28 models. Each handle is manufactured in injection molded ABS plastic and then carefully...

OER reproduction of the original leather wrapped shift knob for 1987-02 Camaro with NP5 leather-wrapped steering wheel option and 1988-96 Regal / GS models with automatic transmission. Manufactured in injection-molded...

Reproduction of the original shift button emblem designed for use on 1976-81 Pontiac Firebird models. Each emblem is manufactured in quality injection molded ABS to factory specifications. Includes correct gold and black bird...

Reproduction of the original shift button emblem designed for use on 1976-81 Pontiac Firebird models. Each emblem is manufactured in quality injection molded ABS to factory specifications. Includes correct red and black bird...

OER® reproduction of the original shifter handle designed for use with various 1968-72 Chevrolet models equipped with a center floor console and a Horseshoe style shifter with TH350 or TH400 transmission. Each shifter...

OER® reproduction of the original clip for use with automatic transmissions shift levers. Attaches the shift knob to the lever on vehicles equipped with factory GM auto trans console shifter. A necessary clip required to...

OER® reproduction of the original automatic shifter assembly designed for use with all 1970-72 Chevrolet Camaro models equipped with Turbo-350 or Turbo-400 automatic transmissions. Features chrome plated shifter handle...

The lower kickdown rod which was used on 1967-1972 Camaro models with factory installed V8 engines and Powerglide transmissions, is a commonly forgotten link in your vehicles drive train. This rod mounts between the...

Replacement brass radiator fittings for 1964-73 Mustang models. These 1/8" fittings thread into the radiator and act as connecting points for the transmission coolant lines. Sold in pairs. Applications 1964-1973 Ford Mustang

This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...

OER® reproduction of the original style transmission throttle valve cable designed for use with various 1976-80 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. models with TH350 automatic transmissions. Each...

You will have flexibility with this transmission dipstick designed for use with GM Powerglide transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. ...

A shifter rod designed to allow the use of a Powerglide shifter rod linkage with a TH350 transmission. This special kit converts a floor shift powerglide to a floor shift Turbo 350/400. Includes a shift rod and bracket. Use...

You will have flexibility with this transmission dipstick designed for use with Chrysler A904 transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. ...

OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...

Reproduction of the original transmission torque converter cover designed for use on 1973-87 Buick Regal, Grand National and T-Type and various other GM models. Each torque converter cover is manufactured in stamped steel to...

Reproduction of the original console shift Indicator lens designed for use with 1971-74 Mopar B and E body models. Manufacture in clear acrylic ABS matching the original in quality, fitment and appearance. Features...

This chrome plated dipstick with tube for the GM hydromatic transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper installation.

OER® Authorized reproduction upper kickdown clip for models with powerglide automatic transmission. Connects the upper passing gear kickdown rod to the bellcrank assembly. Applications: 1967-69 Camaro with Powerglide...

OER Authorized kickdown cable with stainless steel braided housing to fit Mopar A-727 transmissions. Designed with a specially extruded liner for extended life. Features aluminum fittings with ferrule to eliminate frayed...

Reproduction of the original torque shaft bushing designed for use on various 1967-74 dodge and Plymouth models. This replacement torque shaft bushing is designed for use on column and floor shift automatic applications. Made...

OER® reproduction shifter installation hardware set for models equipped with a floor console and horseshoe automatic shifter. Includes correct factory style clips to attach the shift cable to the base and all necessary...

OER® reproduction of the original and correct plastic torque converter cover (also called a flexplate/flywheel cover) for use with various 1967-79 GM vehicles with TH350 transmissions and a 153 tooth flex plate. Each...

Reproduction of the original clutch linkage components designed to replace the clutch linkage on 1972-81 Camaro small block or big block models. Each comprehensive clutch linkage set includes the necessary components to...

OER® reproduction of the original style supplemental floor shifter hardware set designed for use with various 1968-72 Chevrolet models with TH350 and TH400 transmissions. This comprehensive hardware set includes all...

Reproduction of the original outer T-handle shifter for use on 1968 Firebird models with automatic transmissions. Each handle is injection molded in quality ABS plastic replicating the original in appearance and design. Will...

OER® reproduction of the original flywheel pan (also called a torque converter cover) for use with various 1962-73 Chevrolet models. Each flywheel pan cover, aka the torque drive convertor cover is manufactured to OE...

Quality reproduction of the original console shift lens for use on 1964 Impala SS models with powerglide transmissions. Each lens is manufactured to factory specifications including the letters P-R-N-D-L. Will replace the...

This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...

Swivel assembly formanual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...