1970 Chevrolet Camaro Parts - Transmission

The lower kickdown rod which was used on 1967-1972 Camaro models with factory installed V8 engines and Powerglide transmissions, is a commonly forgotten link in your vehicles drive train. This rod mounts between the...

Reproduction of the original GM shift boot and plate retainer for use on all 1967-70 Chevrolet Camaro models 4 speed manual transmissions without a floor console. This retainer is manufactured in stamped steel and used to...

OER® Authorized reproduction of the original transmission crossmember designed for use on 1970-74 Camaro and Firebird with Turbo 400 Transmissions. The Turbo 400 crossmember is a must for models being converted from...

This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...

OER® Authorized reproduction of the original transmission crossmember designed for use on 1970-74 Camaro and Firebird models with Turbo 400 Transmissions. The Turbo 400 crossmember is a must for models being converted...

OER® reproduction of the original shift cable designed for use with 1968-72 Camaro and Chevelle models with automatic transmissions. Each cable is manufactured to replace the old or damaged cable assembly. Includes boot...

You will have flexibility with this transmission dipstick designed for use with GM Powerglide transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. ...

Chemicals, excessive movement and overall time in general can take it's toll on one of the most crucial components of your driveline, the transmission mount. Once available only in degradable rubber compound, this mount is...

Correct reproduction brake and clutch pedal pad trim plate for various 1967-81 GM models with manual transmission. Each steel pedal trim plate is designed to replicate the original in fit, appearance and design. {specs} ...

OER® reproduction of the original transmission kickdown control cable designed for use with various 1968-77 Buick, Chevrolet, Pontiac, and Oldsmobile models with TH-350 automatic transmission with 6 cylinder. Each cable...

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

Reproduction of the original shifter base designed for use with 1970-72 Chevrolet Camaro models equipped with a center floor console and a horseshoe shifter. Each base is manufactured in stamped steel to factory...

OER® reproduction of the original clutch fork return spring which attaches from the clutch fork to the frame rail on models with manual transmissions. This reproduction spring replicates the original in every detail. Will...

OER® reproduction of the original automatic shifter assembly designed for use with all 1970-72 Chevrolet Camaro models equipped with Turbo-350 or Turbo-400 automatic transmissions. Features chrome plated shifter handle...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...

OER® reproduction shifter installation hardware set for models equipped with a floor console and horseshoe automatic shifter. Includes correct factory style clips to attach the shift cable to the base and all necessary...

OER® reproduction of the original shifter handle designed for use with various 1968-72 Chevrolet models equipped with a center floor console and a Horseshoe style shifter with TH350 or TH400 transmission. Each shifter...

OER® reproduction of the original style supplemental floor shifter hardware set designed for use with various 1968-72 Chevrolet models with TH350 and TH400 transmissions. This comprehensive hardware set includes all...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

Reproduction of the original speedometer cable designed for use with various 1964-1990 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. This reproduction speedometer cable is manufactured to original GM...

This chrome plated dipstick with tube for the GM hydromatic transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper installation.

OER® reproduction of the original flywheel pan (also called a torque converter cover) for use with various 1962-73 Chevrolet models. Each flywheel pan cover, aka the torque drive convertor cover is manufactured to OE...

This is The plastic clutch Z bar insert set that allow the bar to pivot on the clutch ball These are present on most all GM cars from 1962-81 with a manual transmission. This four piece set which includes 3 nylon bushings and...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

Reproduction of the original lower speedometer cable designed for use with various 1967-81 Camaro, Corvette, Nova, Firebird, and 1982-89 Chevy, GMC truck models as listed. This reproduction speedometer cable is manufactured...

Correct reproduction of the original return spring extension rod designed for use on various GM models as listed. This rod is used in conjuntion with the clutch fork return spring. Together they connect the clutch fork to the...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

OER® reproduction of the original frame side clutch bellcrank pivot ball bracket designed for use on 1970-81 Camaro and Firebird models with manual transmissions. This steel bracket attaches to the vehicles frame....

OER® reproduction upper clutch push rod boot for various 1970-81 Buick, Chevrolet, Oldsmobile and Pontiac models. Each clutch rod boot is manufactured in quality EPDM rubber matching the original boot cosmetically in...

Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...

Reproduction of the original shift boot retainer plate designed for use on 1970-81 Camaro and Firebird models with 3/speed or 4/speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel...

Reproduction of the original lower shift boot seal designed for use with 1970-81 Camaro and Firebird models with manual transmissions. Each boot is manufactured in quality EPDM rubber replicating the original in design,...

OER® reproduction of the original and correct plastic torque converter cover (also called a flexplate/flywheel cover) for use with various 1967-79 GM vehicles with TH350 transmissions and a 153 tooth flex plate. Each...

Reproduction of the original style clutch housing and flywheel cover plate designed for use on a variety of 1964-81 Chevrolet models as listed. Manufactured in stamped steel to original specifications that replicate the...

OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...

Reproduction brake or clutch pedal pad for a variety of GM models equipped with manual transmissions and drum brakes. Manufactured in quality EPDM rubber replicating the original horizontal ribbed design. This pedal pad can...

OER® reproduction of the lower clutch push rod designed for use on various GM models. Includes right angle shell portion correctly swaged and internally threaded to match the lower clutch push rod adjuster for 6 cylinder...

Reproduction of the original speedometer cable retainer clip designed for use with various for 1969-90 General Motors vehicles. This retainer clip is manufactured in stamped steel replicating the original design. Retains the...

OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...

This is an exact OER® reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each pivot ball is manufactured from hardened steel replicating the original in...

Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...

OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

Stainless steel transmission kick-down cable that fits TH350 transmissions with carburetor kick-down cable. Designed for 4 barrel-type carburetors and small block Chevrolet engines. Includes extender for more versatility in...

This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...

Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...

Reproduction of the original style heavy weight chrome shift knob designed for use on high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct...