OER Parts Restoration Parts and Accessories - Moldings

This seven piece kit includes the moldings which extend from the rear ledge of the hood section around to the rear of the door. Kit includes: 1 Hood Ledge Molding 2 Upper Rear Fender Moldings 2 Outer Door Reve al Moldings 2...

Replace worn out or damaged moldings with these quality reproductions. Reproduction of the original 1970-81 Camaro and Firebird window trim molding for use on vehicles with bright chrome drip rails. Manufactured from high...

Reproduction of the original style mounting hardware designed to install rear trunk trim panel molding on 1968-69 Mopar B-Body models. The rear trim panel molding installs on rear body panel between tail lamps. Includes trim...

Reproduction of the original lower body moldings designed for use with 1968 Chevy II and 1969-74 Nova deluxe models. Each bright finished aluminum molding is designed to match factory specifications replicating the original...

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Note: For set of 12 pieces, refer to item # HK525. ...

Factory-style replacement rocker panel moldings for 1967-69 Dodge Dart models. These moldings attach directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. Made in USA. Sold...

OER Authorized® reproduction hood lip molding for all 1973-74 Nova models. Mounts on the front leading edge of the hood panel. Manufactured in stamped aluminum and designed to factory specifications, each molding features...

Reproduction of the original hood molding designed for use on 1947-55 1st series Chevrolet pickup, Panel or Suburban models. Each molding is manufactured in stainless steel in a one piece design that makes replacing the...

Factory-style rocker panel moldings mount underneath each door and run from front fender to rear quarter panel. Moldings feature proper polished finish and contours for correct replacement. Sold as a pair. Mounting hardware...

Reproduction of the original hood molding designed for use on 1947-55 1st series GMC pickup models. Each molding is manufactured in stainless steel in a one piece design that makes replacing the original molding easier. This...

Excellent quality reproduction molding that attaches directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. When only the best quality will do, we offer this OER® show...

Reproduction of the original hardware designed to install the trunk lid molding for 1970-74 Mopar E-Body models. This hardware set is used to mount the 3-piece molding set that installs onto the deck lid and the rear quarter...

Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each set will provide a snug fit for the molding being attached. The amount of clips will vary depending on the...

Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each clip set will provide a snug fit for the molding being attached. The amount of clips required for the job will...

OE style reproduction molding clip used to attach the vertical paint divider moldings on all 1955-56 models and 1957 150 models. On 1956 Bel Air sedan and wagon models where the paint divider molding extends into the body...

The correct hardware can make a great difference in the finished look or your restoration. When mounting the fender moldings on your 1964 Impala, use the correct clips for a proper fit.

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...

Factory-style replacement hood lip molding for 1966 Coronet models. Mounts on the front edge of the hood and features the correct finish. Manufactured to factory specifications to properly replace the original molding. Made...

Produced in brightly polished aluminum, these reproduction wheel opening moldings will install and replace your originals exactly. These moldings were available from the factory as an exterior option for 1969 Camaro models. ...

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...

Reproduction of the original rear hood ledge molding designed for use on 1970-81 Camaro models. Each hood molding is designed and manufactured to replicate the original in quality, fitment and appearance. Manufactured to...

Reproduction of the original upper front windshield molding connector designed for use on 1955-57 Chevrolet models. This upper molding connector is frequently damaged or lost when replacing the windshield or windshield...

This factory-style replacement wheel opening molding set for 1970-74 Dodge Challenger models is manufactured to factory specs with original-quality materials for an authentic appearance. Sold as a set of 4. Mounting screws...

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Will not fit Charger 500 models. Each molding features proper finish and...

Factory-style replacement hood lip molding for 1965 Coronet models. Mounts on the front edge of the hood and features the correct finish. Manufactured to factory specifications to properly replace the original molding....

"Fish Gill" rocker moldings mount underneath each door and run from the fender to the quarter panel. Manufactured of fiberglass and plastic composite, and feature correct contours with finish. Although original for 1970 'Cuda...

Factory-style replacement trunk lid molding for 1966 Coronet models. This molding mounts on the rear of the trunk lid. Features proper contours and stud location to correctly replace the original molding. Made in USA. Sold...

Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...

Factory-style replacement hood lip molding for 1966 Satellite and Belvedere models. Mounts on the front edge of the hood and features the correct finish. Manufactured to factory specifications to properly replace the...

This trunk lid molding for 1967 Barracuda models mounts on upper and lower rear portion of trunk lid. Made in USA. Sold individually. Two required per vehicle. For mounting hardware (sold separately), see part # MN2173. ...

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...

These factory-style non-polished replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Measures 82" x 3". Made in USA. Each molding features proper finish and...

Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....

Replace the wheel opening moldings on your 1967-69 Barracuda with this premium wheel opening molding set. Manufactured to factory specifications with original-quality materials to give your Barracuda a fresh look. Sold only...

Reproduction of the original wheel opening moldings designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original outer upper windshield molding designed for use on 1967-69 Camaro and Firebird coupe models. Each molding is designed to replace the damaged or dinged original. Each molding is manufactured from...

Replace your dented or missing original wheel opening moldings with this premium replacement molding set. Manufactured to OE specifications using original materials for an authentic appearance. Sold as a set of 4. Mounting...

Reproduction of the original windshield moldings originally installed in 1947-53 Chevrolet and GMC truck models. Each molding is manufactured to correct factory dimensions replacing the old, damaged, or missing originals....

Reproduction of the original wheel opening moldings designed for use on 1970-74 Dodge Challenger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original eyebrow molding for use with 1969-72 GMC models. Manufactured in stamped aluminum and anodized to a polished bright shine. Includes installation hardware. Replaces GM part # 3985068. GMC...

Produced in brightly polished aluminum, these reproduction wheel opening moldings will install and replace your originals exactly. These moldings were available from the factory as an exterior option for 1969 Firebird models....

OER®replacement rear window glass molding clip for various GM models as listed. Each clip is sold individually. Number of clips required may vary depending on the model. This steel clip measures 3/4" x 11/16". Sold...

Reproduction of the original hood lip molding designed for use on 1967-68 Mustangs. Mounts on the edge of the hood above the grille. Produced in highly polished stamped aluminum as original, this finely crafted hood peak...

Reproduction of the original wheel opening molding designed for use on 1968-70 Dodge Coronet models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original upper rear panel molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured to factory specifications, contoured and stamped correctly for a perfect fit. {fitment}

Reproduction of the original molding clip designed for use on various GM models. These special clips are specifically used to install a variety of moldings including the applications listed below. Sold individually. Use as...

Reproduction of the original style rocker panel molding clip designed for use with various GM models. If you need replacement clips for your existing rocker moldings, or plan to install new ones, this is the clip you'll need....

Reproduction molding retainer clip for a wide variety of 1964-72 GM models. Designed for emergency use, when a screw-on clip is required. Produced in spring steel to OE specifications. Sold individually. Replaces OE #...

OER® reproduction of the original lower corner windshield molding clips for 1967-69 Camaro and Firebird models which retain the lower corners of the lower moldings to the windshield. These clips are used in addition to...

Factory-style reproduction of the original rear deck lid molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured in quality stamped aluminum for an authentic appearance and fit. Mounting...

Reproduction of the original wheel opening molding designed for use on 1968-70 Dodge Coronet models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

OER® reproduction of the rocker panel molding designed for use with 1969 Pontiac Firebird models. Each rocker panel molding is meticulously manufactured in stamped aluminum and features the correct anodizing for authenticity...

Replace your dented or long-gone wheel opening molding with this premium molding. Each molding is stamped to fit your vehicles contours exactly and features the correct finish for an original fit and appearance. Sold as a...

OER® reproduction of the original rocker panel molding designed for use on 1967-68 Pontiac Firebird models. Each rocker panel molding is manufactured in stamped aluminum and features correct anodizing for an authenticity...

Produced in brightly polished aluminum, these reproduction wheel opening moldings will install and replace your originals exactly. These moldings were available from the factory as an exterior option for 1968 Camaro Rally...

OER® Authorized reproduction of the original lower tailgate molding designed for use on 1967-72 Chevrolet and GMC Pickup models. Each molding is stamped to factory specifications for a perfect fit and original...

Reproduction of the original eyebrow molding for use with 1969-72 GMC models. Manufactured in stamped aluminum and anodized to a polished bright shine. Includes installation hardware. Replaces GM part # 3985067. GMC...

Reproduction of the original style trunk deck opening molding for use with 1968-69 Dodge Charger models. This stainless steel molding mounts to the rear of the deck lid opening and finishes off the the tail panel molding set....