OER Parts Restoration Parts and Accessories - Exterior Trim

This seven piece kit includes the moldings which extend from the rear ledge of the hood section around to the rear of the door. Kit includes: 1 Hood Ledge Molding 2 Upper Rear Fender Moldings 2 Outer Door Reve al Moldings 2...

Reproduction exterior sail panels for 1984-86 SVO Mustangs. These attractive sail panels were originally installed exclusively on SVO models, but were a popular upgrade for owners of 1979-86 hatchback Mustangs. Reproduced in...

Reproduction of the original exterior quarter panel vents designed for use with 1967-1968 Mustang Fastback models. Each louvered panel is manufactured in quality stamped steel to OE specifications. These panels are located...

Reproduction of the original rear trim panel molding designed for use with 1969 Plymouth Barracuda models (except Formula S). Installs on rear body panel between tail lamps. Features correct paint scheme and "Barracuda" ...

Reproduction cast trunk trim panel for 1969 Sport Satellite models. Manufactured to factory specifications featuring bright chrome plating, correct textured argent finish and black accents surrounding the two rectangular...

Rear trim panel for 1967 Plymouth Satellite models. Installs on rear body panel between tail lamps. Features correct paint scheme for Satellite and "PLYMOUTH" wording for an authentic original appearance. Made in USA. Mopar...

Reproduction of the original rear trim panel molding for 1967 Plymouth GTX models. Installs on rear body panel between tail lamps. Each panel is manufactured in quality die-cast zinc matching the original Plymouth panel....

Reproduction of the original tail gate trim panel band for use on 1975-80 Chevrolet Cheyenne pickup trucks, and 1975 Cheyenne Blazer models. Each band is manufactured in stamped brushed aluminum and features a correct brushed...

The center grill and headlamp doors have been heat stamped with chrome to match the original appearance. Originally the 1967 Rally Sport models featured an all-black grill and headlamp doors. If you want to restore your...

Reproduction of the original rear trim panel designed for use on 1969 Plymouth GTX models. Each panel is manufactured in quality die-cast zinc metal offering an authentic appearance that replicates the original in design and...

The center grill and headlamp doors have been heat stamped with chrome to match the original appearance. Originally the 1968 Rally Sport models included chrome horizontal trim on the edging which is included on this grill and...

Replace worn out or damaged moldings with these quality reproductions. Reproduction of the original 1970-81 Camaro and Firebird window trim molding for use on vehicles with bright chrome drip rails. Manufactured from high...

Reproduction of the original lower body moldings designed for use with 1968 Chevy II and 1969-74 Nova deluxe models. Each bright finished aluminum molding is designed to match factory specifications replicating the original...

Reproduction of the original style mounting hardware designed to install rear trunk trim panel molding on 1968-69 Mopar B-Body models. The rear trim panel molding installs on rear body panel between tail lamps. Includes trim...

Reproduction of the original standard Camaro park lamp aluminum trim designed for use on 1970-73 standard Camaro models. Manufactured in quality stamped alinimum, bezels are designed to install on original GM or OER...

Excellent reproductions of the 1967-68 Firebird quarter panel ornaments which install on the front section of the quarter panel area. These are high quality die-cast reproductions of the second design ornaments which did not...

Reproduction of the original grill insert designed for use with 1978-79 F-100, F-150, F-250, F-350, and Bronco models. This direct replacement grill panel is manufactured in injection molded ABS and features the original...

Reproduction of the original die-cast trunk trim panel designed for 1968 GTX or Sport Satellite models. This authentic reproduction installs on the trunk lid between tail lamps. Features textured dark argent paint scheme...

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...

Reproduction of the original door edge guards designed for use on all 1967-75 Dodge Dart and Plymouth Valiant 2 door models. Each guard is manufactured to exact specifications. Will fit and install on the door as original,...

Reproduction of the original door edge guards designed for use on all 1968-70 Dodge Charger models. Each guard is manufactured to exact specifications. Will fit and install on the door as original. Designed to protect the...

Authentic reproduction of the original tail lamp filler panel for 1979-81 Berlinetta Camaro models. Each filler is manufactured in injection molded ABS to exact factory specs. The filler applique attaches to the rear tail...

OER® reproduction of the clips used to attach the lower windshield molding to the vehicle. For 1968-74 Chevrolet Nova, and other GM X-Body models. Original fit and application includes 10 separate clips to install the...

This factory-style replacement center grill is manufactured to original specifications, features the correct bright silver finish and proper mounting points to replace the original in both appearance and fit. Made in USA. ...

Reproduction of the original stamped steel molding clip designed for use on various GM models including 1962 Corvair, and 1962-65 Chevy II and Nova coupe models. Each clip provides for a snug fit for the molding as original....

Correct reproduction of the original stamped stainless steel passenger side upper rear glass molding designed for various 1975-79 Nova and X-body GM models. Each molding is manufactured to exact factory specifications and...

Authentic reproduction of the original tail lamp filler panel for 1985-92 Z28 Camaro, 1985-90 IROC-Z Camaro, and 1991-92 RS Camaro models. Each filler is manufactured in injection molded die-cast zinc and painted black with...

Correct reproduction of the original interior rear upper side panel molding designed for use on 1967 Camaro and Firebird models. Each molding is manufactured in correctly stamped stainless steel material to factory...

Reproduction bracket for the radiator grill lower front end panel on 1973-79 Chevrolet and GMC C/K pickup, Blazer, Jimmy, and Suburban and 1980 models with round headlamps. Each bracket is produced in stamped steel in the...

Reproduction of the original front grill assembly designed for use on 1986-90 Chevrolet Caprice models. Each grill is manufactured in injection molded ABS replicating the original in designed and appearance. Features a bright...

Correct reproduction of the original rear wheel opening molding designed for use with 1971-73 Mustang coupe and convertible models. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the...

OER reproduction of the LH driver side 1968 Charger headlamp door assembly. Each door is manufactured in a high pressure injection molding process just like the factory Mopar item. Injection molded in black, each door is...

Reproduction of the original rear wheel opening molding designed for use with 1992-98 Ford F100, F150, F250, F350 pickup trucks, and Bronco models. Each wheel well molding is manufactured in stamped aluminum to factory...

Reproduction hood latch catch supper bracket for all 1977-80 Chevrolet C/K series pickup, Blazer/Jimmy and Suburban models. This set features the correct design to accommodate the grill used by the factory for the three years...

Reproduction of the original stamped well molding clips designed and manufactured to attach the rear convertible well chrome molding around the top well.

This reproduction nylon molding clip set will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...

Correct reproduction of the original outer door ledge reveal molding and window felt weatherstrip for 1968 Camaro convertible models. The moldings are manufactured in quality stamped aluminum with a polished chrome plated...

OER® Authorized reproduction of the original front grill shell designed for use on 1967-68 Chevrolet Pickups, Panel trucks, and Suburban models. Each grill is manufactured using original grade stamped steel, and...

Reproduction of the original 1982-84 Camaro Z-28 grill front assembly designed for use on 1982-84 Camaro Z-28 models. Each grill is manufactured in injection molded ABS to original factory specifications. For use on passenger...

Reproduction of the original headlamp bezel molding designed for use with 1970 Barracuda and Cuda models. Each bezel molding is manufactured in quality stamped aluminum to factory specifications featuring original style...

Reproduction of the original front fender gill mounting plate for 1971 Plymouth 'Cuda models. Manufactured to OE specifications replicating the original mounting plates. Can be used to convert a non-gill 1971 Barracuda fender...

Reproduction of the rear finish panel molding designed for the trunk of 1969 Dodge Dart GTS models. Each panel is manufactured in stamped aluminum, anodized and polished to perfection offering an authentic appearance and fit....

Reproduction of the original type screws that attach the pillar post moldings on all 1968-69 Camaro and Firebird models. These phillips head screws will attach the pillar post moldings and feature a chrome finish. Sold in a...

Correct reproduction of the original rear wheel opening molding designed for use with 1971-73 Mustang models. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the original configuration and...

Reproduction of the original rocker panel molding originally designed for use on 1962 Impala and Full Size Chevrolet models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours...

Reproduction of the original front grill surround designed for use with 1970 Dodge Challenger models. Each surround is manufactured to correct factory specifications and will replace the old or worn out original exactly....

Reproduction of the original front grill inserts for 1982-84 Firebird models. Each grill is manufactured in injection molded ABS replicating the original in design and fitment. Sold in pairs. Note: Not for use with 1983...

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

OER® Authorized reproduction of the original rear panel wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring...

OER reproduction of the original 1973-74 Charger SE passenger side (RH) front grill assembly. Manufactured in gray injection molded ABS, and finished in chrome just like the original factory item. Plastic headlight shield and...

Factory-style reproduction of the original rear deck lid molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured in quality stamped aluminum for an authentic appearance and fit. Mounting...

Reproduction standard style front grill installed on all 1968 Camaro standard models (without the Rally Sport hideaway headlights option). Each grill is manufactured in injection molded ABS in the correct color argent silver...

This OER reproduction grill assembly designed to replicate the 1970-72 Plymouth Valiant, Duster, and Scamp grill. Each grill is injection molded as original and designed to exact specifications of the original. This grill is...

Reproduction windshield molding clips for a variety of classic Amercian car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang models. These clips are push on style that...

Reproduction of the original lower windshield molding designed for use on various 1955-56 Chevrolet models. This stainless steel molding is manufactured to original factory specifications and features original style contours...

Reproduction chrome plated plastic grill shell and painted black cross-bar style insert for 2007-10 GMC Sierra 2500 HD/3500 HD GMT900 Series trucks. This grill is a direct OE replacement chrome grill that comes with a black...

Reproduction of the original style front grill for use with 1988-93 Chevrolet C/K pickup trucks and 1992-93 Blazer, and Suburban models with dual composite headlamps. Manufactured in injection molded ABS to factory...