1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1955-57 Chevy Bel Air, Corvette, 150, 210, Nomad; Accelerator Pedal Pad
Correct reproduction accelerator pedal for 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each pad is manufactured to correct factory specifications replicating the original in design and fitment. Features correct...
1971-74 Trans-Am Throttle Cables
These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.
1970 Firebird, Trans Am; Accelerator Lever Cable; 350, 400, 455 HO, or Ram Air
Reproduction accelerator lever cable for 1970 Firebird and Trans Am models with 350, 400, 455 HO or Ram Air. This cable extend from the accelerator to the throttle arm. If your original cable shows signs of fraying or...
1967-71 Pontiac GTO, LeMans, Tempest; Accelerator; Throttle; Cable; GM#9792069
Reproduction accelerator/throttle cable bracket that is exactly like OEM. It features the correct OEM number stamped 9792069 unlike what was previously on the market. Fits 1967-71 GTO, LeMans and Tempest with 350ci, 400ci,...
Reproduction Tri-Power accelerator/throttle cable mounting bracket is a perfect fit for 1965-66 GTO, LeMans, Tempest, Grand Prix and Bonneville with Tri-Power 389 engine. 4 piece kit. See vehicle fitment for complete...
1967 Firebird; Quadrajet Throttle Arm; For V8
Reproduction 1967 Pontiac Firebird throttle lever arm, also known as the carburetor lever extension. This is the throttle arm bracket that is used only on 1967 Firebird V8 equipped models with 4 barrel Quadrajet carburetor....
1971-72 Mopar Accelerator Pedal Pad ; A,B,C,E-Body
Reproduction of the original accelerator pedal pad designed for use on various Chrysler, Dodge and Plymouth A, B, C, and E-body models. This injection molded ABS pedal pad is an accurate reproduction of the original pad...
1968-72 Pontiac GTO, Grand Prix, LeMans; Accelerator/Gas Pedal; Rubber OEM
Reproduction accelerator pedal for 1968-72 Pontiac GTO, Grand Prix and LeMans vehicles. Each accelerator pedal is manufactured in rubber like the rubber pedals that replicates the original in fit and design. It features the...
1967-73 Skylark, Riviera, Regal; Accelerator Return Spring; Bracket
This is the factor throttle/accelerator return spring bracket that attaches to the intake and hold returns spring. For various Buick models including Electra, Skylark, Regal, LeSabre. Sold individually. See vehicle fitment...
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Reproduction of the original accelerator pedal pad designed for use on 1966-70 Belvedere, Charger, Road Runner, Satellite and Superbird B-Body models. This quality reproduction is manufactured in hard rubber material...
1962-65 Dodge,Plymouth A, B-Body; Accelerator Pad, Floor Mounted
Reproduction of the original accelerator pedal pad designed for use on 1962-65 Dodge and Plymouth models. This quality reproduction is manufactured with an OEM style embedded steel core offering an authentic appearance and...
1968-69 Camaro; Crossram Throttle Rod; Accelerator Pedal Rod
Reproduction crossram throttle rod or accelerator pedal rod for 1968-69 Camaro models equipped with the optional Crossram induction system. This unique linkage rod mounts to the accelerator pedal at the firewall and attaches...
1973-74 Dodge, Plymouth; Accelerator Pedal Pad with Bezel and Hardware; Various Models
Reproduction of the original accelerator pedal pad, chrome trim and mnounting hardware designed for use on 1973 Mopar B,C, and E-Body models. Manufactured exactly as original including the correct grain texture for an...
1964-65 Pontiac GTO, LeMans; Accelerator Pedal; OER Rubber
This pedal is a reproduction of the OEM 1964-65 Pontiac GTO and LeMans. Sold individually. This is a factory style rubber gas/accelerator pedal and is 100% correct.
1971-72 Dodge, Plymouth; Accelerator Pedal Pad and Bezel Kit ; Various Models
Reproduction of the original accelerator pad, bezel and hardware designed for use on Dodge and Plymouth A, B and E-body models. This injection molded ABS accelerator pedal pad set includes the pedal pad, stainless steel...
1966-67 Pontiac GTO, LeMans; Gas Pedal; OEM Rubber
Reproduction OEM rubber accelerator pedal. This is a factory rubber accelerator pedal reproduced like the OEM for 1966-67 Pontiac GTO and LeMans. Most of the ones on the market are plastic. This reproduction is 100% correct....
1971-74 Mopar Accelerator Pedal Pad Bezel ; Various Models ; Stainless Steel
Reproduction of the original accelerator pedal bezel designed for use on various 1971-72 Reproduction of the original accelerator pad bezel designed for use on Mopar A,B,C-Body and E-Body models. Each accelerator pedal bezel...
1978-88 Buick, Chevrolet Pontiac, Olds; Accelerator Pedal Pad; Various Models
Reproduction of the original accelerator pedal designed for use on various 1978-87 GM G-Body models. Manufactured in injection molded ABS to factory specifications replicating the original in quality and appearance. Will fit...
1968-75 Oldsmobile Cutlass, 1968-71 Oldsmobile 442 Models; Accelerator Pedal
New replacement accelerator pedal for 1968-75 Oldsmobile Cutlass and 1968-1971 Oldsmobile 442. Sold individually. It measures 6.5 Inches long.
This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...
1955-69 GM; Accelerator Pedal Firewall Bushings; 1/2" Long, 5/16" I.D.; Pair
Reproduction accelerator firewall bushings for various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive play in the gas pedal pad while...
1964-71 Chevrolet, GMC; Floor Mounted Accelerator Pedal Pad Trim Plate; Various Car & Truck Models
Correct reproduction accelerator pedal pad stainless trim plate for various 1965-71 GM vehicles. Each trim plate is manufactured in stamped stainless offering long lasting dependability and an authentic appearance. This...
1970-74 Dodge, Plymouth; B &E-Body; Accelerator Throttle Cable; with 400, 426, 440; 20"; OER
Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth B and E body big block (400, 426, 440) models as listed. Each cable is manufactured to correct factory specifications...
1970-74 Challenger, Barracuda, Cuda; Accelerator Throttle Cable; 318, 340, 360; 22-1/2"; OER
Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body small block (318, 340, 360) models as listed. Each cable is manufactured to correct factory specifications...
1967-74 Dodge, Plymouth A-Body; Accelerator Throttle Cable; 383, 440; 18"; OER
Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth A body models with 383, 440 engines. Each cable is manufactured to correct factory specifications replicating the original...
Reproduction of the original carburetor return spring for 1968 GM cars with Special/HIPO big block engines. Manufactured in the correct green color. Applications: 1968 Camaro Z28 with 302 or 396 1968 Chevelle SS with 396 exc....
1969 Firebird; Pedal Pad Kit; with Stainless Trim; Auto Trans; 6 Piece Set
Reproduction of the original pedal pads with trim designed for 1969 Firebird models. This pedal pad and trim set is designed to replace the worn out original pads for 1969 Firebird models with automatic transmissions....
1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models
Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...
1964-71 Chevrolet; Floor Mounted Accelerator Pedal Pad; Rubber; with Steel Insert; OEM Reproduction
Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Each accelerator pedal pad is manufactured in quality hard EPDM rubber unlike the plastic service replacement...
1958-71 GM; Accelerator Pedal Ball Stud Pivot; 1/4"-20 x 1-1/2"; Each; Various Models
Reproduction factory ball stud pivot for various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing the gas pedal...
1968-79 Accelerator Control Cable Retainer ; Various Models
OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...
1968-70 Charger, Coronet, GTX, Satellite, Road Runner; Throttle Cable; with Hemi; 19-3/4"; OER
Reproduction of the original throttle cable designed for use with 1968-70 Dodge Charger, Coronet, Super Bee, and Dodge, Plymouth B-Body Hemi models. Connect the accelerator linkage to the carburetor with this original style...
1968-72 Dodge, Plymouth A-Body Throttle Cable; 19-7/8"; with 273, 318, 340
Reproduction of the original throttle cable designed for use on 1968-72 Dodge and Plymouth A Body models as listed. This reproduction throttle cable is designed for use with 273/318/340 engines. Connects the accelerator...
1970-74 Challenger, Barracuda, Cuda; Accelerator Throttle Cable; with Hemi; 17-1/2"; OER
Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body Hemi models. Each cable is manufactured to correct factory specifications replicating the original in design and...
1970-71 Camaro Z28 Pedal Pad Kit ; Drum Brakes, Auto Trans; 6 Piece Set
Reproduction of the original pedal pads and trim plates for use on 1970-71 Camaro Z/28 models. This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z/28 models with drum brakes and automatic...
1970-71 Camaro Z28 with Disc Brakes and Automatic Transmission; 5-Piece Pedal Pad Kit
This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z28 models with disc brakes and an automatic transmission. Kit includes Accelerator pedal pad Disc Brake pedal pad with the "Disc Brakes" chrome...
1967-77 GM Pedal Pad Kit With Disc Brake Emblem; Auto Trans; 6-Piece Kit
Reproduction of the original pedal pads designed for 1967-68 Camaro, Firebird and a variety of additional GM models as listed. This pedal pad set is designed to replace the worn out original pads for models with disc brakes...
1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models
Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....
1968-72 Camaro, Impala, Nova; Quadrajet Throttle Cable Bracket
Reproduction of the original style Quadrajet throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...
1967-77 GM Pedal Pad Kit - Auto Trans - 6 Piece Kit
This complete kit is designed to replace pedal pads and trim plates on a variety of Chevrolet models including 1967-68 Camaro with drum brakes and an automatic transmission as well as a variety of additional GM models as...
1970-71 Camaro Z28 with Drum Brakes and Manual Transmission Pedal Pad Kit - 7 Piece Set
This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...
1969-71 GM Pedal Pad Kit Manual Transmission; With Disc Brakes Emblem - 8 Piece
Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...
1972-81 GM Pedal Pad Kit - Manual Trans - 8 Piece set
Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and 2-3/8" clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3"...
1972-81 GM Pedal Pad Kit; Manual Trans; 4 Piece Kit; Various Models
Reproduction of the original pedal pads designed for use on 1976-81 Camaro, Firebird and various other GM models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual...
1968-80 Chevrolet, Pontiac; Accelerator Return Spring
This is a correct reproduction of the commonly missing or worn out accelerator return spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Chevrolet Applications:...
1969 Firebird; Pedal Pad Kit; Manual Trans; 8 Piece Set
Reproduction of the original pedal pads designed for 1969 Firebird models. This pedal pad set is designed to replace the worn out original pads for 1969 Firebird models with manual transmission. Replacing the pedal pads will...
1970-71 Camaro Z28 with Disc Brakes and Manual Transmission Pedal Pad Kit - 7 Piece Set
This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...
1967-68 Camaro / Firebird Pedal Pad Kit - Disc Brakes - Manual Trans - 8 piece
Reproduction of the original pedal pads designed for 1967-68 Camaro and Firebird models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual transmissions. Replacing the...