1970 Chevrolet Camaro Parts - Fuel System

Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...

This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...

Die-cut reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications,...

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet...

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Universal fuel tank sending unit for various GM and other models that require a 30 ohm sender. Designed for use with OE or aftermarket 0-30 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...

Reproduction of the original style fuel tank anti squeek set designed specifically for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap...

Universal style accelerator throttle rod designed for use on various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the...

This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 18" fuel hose to your desired length. Nitrile 70 shore rubber hose is specifically engineered to stand up to gasoline, fuel oil, and other petroleum-based products. Measures 2" ID x 18" in length. {fitment} Mustang Fitment Note: This filler hose is required when using our aluminum flip top gas cap to create an Eleanor or Shelby Style fuel cap. Fits between the gas cap and the gas tank. Flip top gas cap (9030B) and filler neck (9034E) available separately.

Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...

This show quality Polished Stainless Steel reproduction fuel tank is manufactured to factory specifications and offers superior corrosion resistance at a reasonable price. Includes the lock ring and o-ring gasket for the fuel sender. Important: Does not include fuel sender (sold separately). Note: Shipped double oversize. Applications: 1970 Camaro without EEC 1970 Firebird without EEC The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER® ;.

Correct reproduction of the original fuel tank designed for with 1970 Camaro and Firebird models. This reproduction fuel tank is manufactured in stamped steel featuring a zinc coating for dependability. Includes the fuel sender lock-ring and o-ring gasket for a complete installation. This is a 18 gallon fuel tank that replaces the old tank perfectly. For use on models without the Evaporation Emission Control system. Fuel Tank Features: Manufactured in Quality Stamped Steel Exact Reproduction of the Original Fuel Tank Features Zinc Coating for Rust and Corrision Prevention 18 Gallon Tank Includes Fuel Sender Lock Ring and O-Ring Gasket Replaces the Original Fuel Tank Exactly! {fitment} Note: Shipped Truck Freight.

Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1970 Camaro and Firebird models. This OE-quality Ni-Terne coated reproduction stamped steel fuel tank is manufactured to factory specifications and is a great value, offering exceptional corrosion resistance. Includes the lock ring and o-ring gasket for the fuel sender. This 18 gallon fuel tank is manufactured fron Nitern steel steel. This tank is for models without the Evaporation Emission Control system. Applications: 1970-1970 Chevrolet Camaro (without EEC) 1970-1970 Pontiac Firebird (without EEC) Note: Shipped double oversize. Important: Fuel sender sold separately. The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®

Reproduction of the original pedal pads and trim plates for use on 1970-71 Camaro Z/28 models. This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z/28 models with drum brakes and automatic...

Correct reproduction of the original accelerator pedal pad stainless trim plate originally installed on various 1965-71 GM vehicles. Each trim plate is manufactured in stamped stainless offering long lasting dependability and...

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z28 models with disc brakes and an automatic transmission. Kit includes Accelerator pedal pad Disc Brake pedal pad with the "Disc Brakes" chrome...

Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Each accelerator pedal pad is manufactured in quality hard EPDM rubber unlike the plastic service replacement...

Reproduction of the original GM cap that includes the correct "S" rivet and properly engraved markings. Manufactured and designed from the original OEM cap, the quality and materials are manufactured to exact specification with the "show car" restorer in mind. High quality representation of the original and now "hard to find" vented gas cap. Officially Licensed GM Restoration Part® Camaro applications: 1969-70 w/o EEC Firebird applications: 1969 - 2nd design 1970 w/o EEC Impala / Full Size applications: 1968-69 wagon 1970 wagon w/o EEC Nova applications: 1968-70 w/o EEC Chevelle applications: 1968-69 El Camino, Wagon 1970 w/o EEC Corvair applications: 1965-69 all You are assured that every part offered is manufactured to exact specifications and will fit and function just like the original part. What's more, most OER® products are officially licensed and carry a full 1 year warrant y against defects and workmanship. Far above most other manufacturers of restoration products, the OER® symbol denotes the finest restoration products on the market. Look for the OER® symbol before buying your restoration parts.

Reproduction of the original accelerator throttle cable bracket for use on 1970-72 Camaro and Firebird models with Holley Carburetors. This quality bracket is manufactured in stamped steel to the original factory...

Reproduction of the original carburetor to accelerator lever cable designed for use with 1970 Camaro (4 bbl), 1971-73 models with (350 4 bbl.), 1970-72 Chevelle (with high performance 396, 454). Each cable is manufactured to correct length and specifications. Replaces original GM part number 336969. {fitment}

Install the sending unit on your vehicle with a new reproduction replacement sending unit lock ring and gasket set. Lock ring is manufactured from steel with zinc coating for corrosion resistance. Each set includes the lock ring and rubber o-ring gaske t. Car Applications: 1970 Camaro w/o EEC 1970-73 Camaro with EEC 1970 Firebird w/o EEC 1970-73 Firebird with EEC 1967-68 Bel Air (except wagon) 1967-68 Biscayne (except wagon) 1967-68 Caprice (except wagon) 1967-68 Impala (except wagon) 1969-70 Bel Air with 24 Gallon Tank (except wagon) 1969-70 Biscayne with 24 Gallon Tank (except wagon) 1969-70 Brookwood with 24 Gallon Tank (except w agon) 1969-70 Caprice with 24 Gallon Tank (except wagon) 1969-70 Estate with 24 Gallon Tank (except wagon) 1969-70 Impala with 24 Gallon Tank (except wagon) 1969-70 Kingswood with 24 Gallon Tank (except wagon) 1969-70 Townsman with 24 Gallon Tank (except wagon) 1973-75 Bel Air with 26 Gallon Tank (except wagon) 1973-76 Capricewith 26 Gallon Tank (except wagon) 1973-76 Impala with 26 Gallon Tank (except wagon) 1973 K ingswood with 26 Gallon Tank (except wagon) 1977-79 Caprice/Impala with 19 Gallon Tank (except wagon) 1980-90 Caprice/Impala (except wagon) with carb gas engs 1977-90 Caprice/Impala Wagon with 22 Gallon Tank 1973-81 SHORT BED PICKUP TRUCK with 16 GALLON FUEL TANK 1973-81 Chevrolet/GMC C/K-10/20/30 1978-81 Chevrolet/GMC C-10 BIG TEN 1975-78 GMC C/K15 Pickup 1977-78 GMC C/K15 Big Ten Pickup 1979-81 GMC C/K 1500 Pickup 1975-78 GMC C/K25 Pickup 1973-74 GMC C/K25/2500 Pickup 1975-78 GMC C/K35 Pickup 1973-74 GMC C/K35/3500 Pickup 1979-81 GMC C/K3500 Pickup 1973-87 SUV, 1975-80 C/K PICKUP with 25 GALLON FUEL TANK 1973-81 Chevrolet/GMC Blazer/Jimmy/Suburban 1975-80 Chevrolet/GMC C-K Pickup with conv cab (behind rear axle) 1982-87 Chevrolet/GMC Blazer/Jimmy/Suburban 1987 Full-size Chevrolet Blazer/GMC J immy(FI gas only) 1987 Chevrolet/GMC R/V Suburban (FI gas only) 1973-91 SUV, 1975-80 C/K PICKUP, 1992-97 3500HD with 31 GALLON FUEL TANK 1973-81 Chevrolet/GMC Blazer/Jimmy/Suburban 1982-91 Chevrolet/GMC Bla zer/Jimmy 1982-87 Chevrolet/GMC C/K Suburban 1987-91 Chevrolet/GMC R/V Suburban 1990-91 Chevrolet C/K 1500/2500, Diesel 1990-97 Chevrolet/GMC 1500/2500, Gas 1992-97 Chevrolet/GMC 3500 with optional (behind the axle) rear fuel tank, Diesel 1992-97 Chevrolet/GMC 3500HD with optional (behind the axle) rear fuel tank, Gas. 1982-87 SHORT BED PICKUP TRUCK with 16 GALLON FUEL TANK 1982-86 Chevrolet C/K-10/20/30 198 7 Chevrolet R/V-10/20/30 1982-86 GMC C/K-1500/2500/3500 1987 GMC R/V-1500/2500/3500 Diesel 1988-00 SHORT BED PICKUP TRUCK with 25 GALLON FUEL TANK 1988-97 GMC C/K 1500/Sierra 2-door 1988-00 Chevro let/GMC C/K 2500/3500 1973-91 LONG BED PICKUP TRUCK with 20 GALLON FUEL TANK 1973-81 Chevrolet C/K-10/20/30 1982-86 Chevrolet/GMC Pickups 1987-91 Chevrolet/GMC Pickups with gas engine 1987-9 1 Chevrolet/GMC Pickups with diesel engine 1988-97 C/K 2-DOOR PICKUP TRUCK with 34 GALLON FUEL TANK 1988-97 GMC C/K1500/Sierra 2-dr 1988-00 Chevrolet/GMC C/K 2500/3500 1992-96 C/K with 42 GALLON FUELT ANK 1992-96 C/K 1500/2500 Chevrolet/GMC Suburban 1994-96 Chevrolet/GMC Suburban (diesel) The OER® Authorized logo represents products that meet or ex ceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.

Reproduction of the original style fuel tank mounting straps designed for use with 1970-73 Camaro and Firebird models. Each strap is manufactured in quality stainless steel to original factory dimensions replicating the...

This is a correct reproduction of the threaded stud used on models equipped with Cowl Induction System. The stud consists standard SAE thread and is coated in clear zinc for corrosion resistance. This stud is used for all...

This show quality Polished Stainless Steel reproduction fuel tank is manufactured to factory specifications and offers superior corrosion resistance at a reasonable price. Includes the lock ring and o-ring gasket for the...

Reproduction of the original fuel tank sending unit designed for use with 1970-73 Camaro and Firebird models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can...

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how much fuel...

Correct replacement gasket which is used between the sending unit and the locking ring. We recommend replacing the gasket any time the sending unit has been removed. Fits: 1967-90 models except wagon

This basic zinc coated reproduction stamped steel fuel tank is manufactured to factory specifications and is a great value, offering standard corrosion resistance at a reasonable price. Includes the lock ring and o-ring...

Reproduction of the original fuel tank brace set designed for use with 1970-73 Camaro and Firebird models. Each fuel tank brace is manufactured in stamped steel to original factory specifications featuring correct contours...

Reproduction of the original style fuel tank mounting straps that fit all 1970-73 Camaro and Firebird models.These quality straps are manufactured in heavy duty pre-formed zinc plated steel that replicate the original in...

This OE-quality Ni-Terne coated reproduction stamped steel fuel tank is manufactured to factory specifications and is a great value, offering exceptional corrosion resistance. Includes the lock ring and o-ring gasket for...

OER® reproduction of the original carburetor heat shield designed for use on all GM models with a Holley 4 bbl carburetor. This heat shield will help cool the intake charge for better performance. Original for 1970 396ci & 454ci with Special high-performance engines, (engines equiped with Holley carburetors), with E.E.C. (Evaporative Emission Control), also known as vapor recovery system. Original for all 1970 models with Special Hi Performance 396 and 454 engines including Corvette. Features original part number 3969835 and firing order. Applications: 1965-1972 Chevrolet Chevelle (396, 454) 1965-1974 Chevrolet Impala (396, 454) 1965-1974 Chevrolet Biscayne (396, 454) 1965-1974 Chevrolet Bel Air (396, 454) 1966-1974 Chevrolet Caprice (396, 427) 1965-1972 Chevrolet Corvette (396, 427) 1967-1972 Chevrolet Camaro (396) 1970-1970 Chevrolet Chevelle (454) 1968-1968 Chevrolet Chevy II (396) 1968-1974 Chevrolet Nova (396)

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...

OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...

Reproduction of the original style fuel sending unit designed for use with various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models as listed below. If your fuel gauge isn't reading correctly, it may be the fuel...

Reproduction of the original license plate / fuel door stoppers used for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note:...

OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various 1962-82 GM models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on...

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...

Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....

Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van ...

Reproduction air cleaner lid seal designed to seal between the lid and the base for various applications. {specs}

Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....

Carburetor air cleaner stud for use on various GM models with Rochester or Carter carburetors. The stud is standard SAE thread and is coated in black zinc for corrosion resistance. Stud measures 1/4"-20 x 2-5/16" with stud is...

Correct wing nut used with all carburetors with 1/4" carburetor studs. After years of use your original air cleaner can become rusted or broken. This wing nut is the perfect replacement for a rusty or damaged original. Fits a...

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....

OER® reproduction of the original clip that was used for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower...

Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging...

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

This special mounting pin is just what you need to correct a loose accelerator pad. This special design allows the pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems commonly...

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...