OER Authorized Molded Carpet Set; Loop; Black; Fits 1967, 1968, and 1969 Camaro and Firebird
Molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new Rayon yarn duplicates the appearance and fit of the original factory 80%-20% Rayon/Nylon loop carpet. This reproduction carpet...
1967 Camaro, Firebird Dash Pad ; Black; Urethane Reproduction
OER® reproduction of the original padded dash designed specifically for use on 1967 Camaro and Firebird models. Each dash pad is manufactured in injection molded urethane material that replicates the original appearance...
1967-68 Camaro; Rear Bumper; Bumper; without Center Bracket; Chrome
Reproduction of the original rear chrome bumper for 1967-68 Camaro models. Each bumper is manufactured to replicate the original in every detail. This reproduction bumper will fit and install exactly like the OE bumper using...
1967-69 Camaro SS; Hood Assembly; Bolt On; Stamped Steel; EDP Coated
Reproduction hood assembly for 1967-69 Chevrolet Camaro Super Sport (350, 396) models. Each hood is manufactured from high-quality stamped steel to original factory specifications, featuring correct body contours and...
1967 Camaro SS, 1968-72 Nova SS; Hood Louvers; with Hardware; RH & LH; Pair; "Show Quality"
Reproduction hood louvers for 1967 Camaro SS and 1968-72 Nova SS models. Each hood louver is manufactured in quality die-cast zinc replicating the original design, appearance, and fitment. Features correct black paint scheme,...
1967 Camaro RS Headlight Door Motor; RH Passenger Side
Reproduction of the original style headlamp motor designed for use with all 1967 Camaro Rally Sport models. Each motor is designed to open and close the headlamp door when the headlamp switch is activated. The motor assembly...
1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1967-69 Camaro, Firebird; Trunk Lid; with Pre-Punched Rear Spoiler Holes; EDP Coated
Reproduction of the original trunk lid designed for use on all 1967-69 Camaro and Firebird models. Manufactured in OEM gauge stamped steel, this reproduction features the underside structure with pre-cut spoiler mounting...
Upholstery Installation and Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4
Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad the seat frame before installing new upholstery. NOTE: Hog rings are required when installing new upholstery. Available separately. Refer...
Universal 9" Windshield Mount Rear View Mirror; Polished Ball Milled Billet Aluminum
Add a custom look to the interior with this fully polished and machined billet aluminum inner mirror. Since you spend most of your time inside your vehicle, why not get rid of your cheap looking original mirror and replace it...
Reproduction 15" x 7" Rally Wheel for various Chevrolet models with 5 x 4-3/4" lug pattern. This wheel is manufactured in steel replicating the original in design and appearance. Replace a rusty, pitted or missing Rally wheel...
Delco Energizer R59 Battery Topper Top Post
Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring the correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat...
Universal 8" Dual Diaphragm Power Brake Booster - Black
Universal 8" dual diaphragm brake booster. Booster will work on a variety of GM, Ford, trucks, and passenger vehicles. Perfect choice when space is at a premium. Will require adjustable pedal rod, correct clevis for your...
1967-74 9" Power Brake Booster; Single Diaphragm; GM Delco Style; Zinc
GM style 9" single diaphragm brake booster. This Delco style brake booster will work on a variety of 1964-72 GM models (but is original style for 1964-66 models). Includes the brackets to bolt directly to the firewall on a...
1967-69 Camaro, 1968-74 Chevy II, Nova; Bow Tie Floor Mat Set ; Black; 4 Piece Set
OER® quality reproduction of the original style front and rear floor mats designed for use on 1967-69 Chevrolet Camaro and 1968-72 Chevy II and Nova models. These high quality rubber floor mats are an exact reproduction...
1967-68 Chevrolet, Buick; Walnut Woodgrain Steering Wheel ; 16" Diameter 4-1/4" Deep; N34 Option
Reproduction Walnut woodgrain steering wheel originally offered with the optional N34 package on select 1967-68 GM models. Known by the factory as the Woodgrain Plastic Rim Sport Style Steering Wheel, this reproduction...
1967-70 Camaro, Nova, Firebird; Bumper Jack Assembly and Base
Exact reproduction of the original bumper jack assembly for various GM models including Camaro, Chevy II, Nova and Firebird models. Each component is designed to replace the original and includes the jack base, jack stand and...
1967 Camaro RS Headlight Door Motor; LH Driver Side
Reproduction of the original style headlamp motor designed for use with all 1967 Camaro Rally Sport models. Each motor is designed to open and close the headlamp door when the headlamp switch is activated. The motor assembly...
Electric Vacuum Pump Set For Power Brakes - Universal Fit
It takes 16" of Hg vacuum to properly activate your vehicle's power brake booster. Sometimes, big-cammed or supercharged engines don't create enough vacuum to operate the booster, making it more difficult to stop. This vacuum...
1967-69 Camaro; Cowl Top Vent Grill Panel; EDP coated
Reproduction of the original cowl top vent grill panel that was original equipment on 1967-69 Camaro models. This louvered stamped steel component installs directly below the windshield and behind the hood panel. Includes...
1967 Camaro Rally Sport Headlight Door Assembly; RH Passenger Side
Reproduction of the original front headlamp door assembly designed for use on the passenger side for 1967 Rally Sport Camaros. Each headlamp assembly comes completely assembled and ready to install. Headlight assemblies are...
1967-69 Camaro, Firebird; Back Window Glass; Coupe; Smoke Gray Tint
Reproduction of the original back window glass for use with 1967-1969 Camaro and Firebird coupe models. Glass is manufactured to correct factory specifications featuring a smoke gray tint. Each glass is professionally packed...
Sanden 508 Style A/C Compressor w/ 6-Rib Serpentine Clutch Pulley; Natural Finish; SD508/SD5H14
New, not rebuilt, Sanden SD508 / SD5H14 style air conditioning compressor. The Sanden/Sankyo 508 is the one of the most popular aftermarket compressors on the market. SD508s rob less horsepower resulting in improved fuel...
1967-69 Camaro, Firebird; Windshield Glass; Coupe; With Upper Gray Shade
Reproduction front windshield glass for 1967-69 Camaro and Firebird coupe models. Each windshield is manufactured to correct factory OE specifications offering an authentic appearance and fitment. Windshields are manufactured...
1967 Camaro; Heater Core Assembly; L6, Small Block; SB V8 without AC; Copper / Brass
Original replacement heater core for 1967 Camaro 6 cylinder and small block models without air conditioning. Each heater core is manufactured to correct factory specifications and features a copper core and brass tank....
OER® Black and Aqua Trunk Spatter Paint Quart
OER® Black and Aqua trunk spatter paint for the descriminating restorer who wants to get an exact color match or to completely restore your trunk to its former glory. This item is produced by the original manufacturer....
Replace a rusty, pitted or missing Rally wheel with this outstanding new reproduction. Each wheel comes beautifully powder coated in correct original silver color. Center caps, trim rings and lug nuts are not included and...
1967-89 GM; Universal Tachometer Filter
Eliminate tach signal noise and surges caused by your ignition system with this compact and easy-to-install tachometer filter. This filter installs between the tachometer and the signal source and modifies the signal for...
Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1965-86 GM; Interior Door Panel Clip; White Nylon; Each
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1967-72 Camaro, Firebird; Console Lid & Console Ashtray Lid Rubber Stopper; Each
Reproduction console lid and ash tray lid rubber stoppers designed for use with 1967-72 Camaro and Firebird models. These stoppers are precision-molded to OEM specifications to deliver a factory-original fit and appearance....
1967-69 Camaro, Firebird; Convertible Top Boot Clip; Each
Correct reproduction top boot clips for 1967-69 Camaro and Firebird convertible models. These clips are specifically designed to hold the top boot to the convertible well molding when the convertible top is in the down...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"
Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...
1960-73 GM; Sun Visor Tip and Bushing Set; 4 Piece Set; Various Models
Tired of sunvisors that won't stay put because the nylon tip is gone? Reproduction of the sunvisor tips and bushings designed for use on various GM models. The sunvisor bushings are manufactured to correct OE specifications...
1967-69 Camaro, Firebird; Door Opening Sill Plate; With Riveted Emblem; RH or LH; Each
Reproduction door sill plates for 1967-69 Camaro and Firebird models. Each sill plate is manufactured to exact specifications using premium quality aluminum replicating the original in every detail. Features correctly riveted...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...
1947-1982 Ford, GM, Chrysler; Glove Box Insert Clip; Each
OER® reproduction of the original style stamped metal clip that attaches to the glove box liner in various classic GM passenger cars and trucks. These clips allow the liner to be aligned and attached in place with mounting...
OER Tri-Stic Retractable Pen with Black Ink
Ever wonder where all your pens go? Why not stock up on this eye catching inexpensive OER® black and yellow retractable pen.
Highly visible, quality lanyards are just what you need for any trade show event or car show. Features the bright OER® logo printed on both sides of 3/4" wide sublimation polyester. Includes an attached O-ring that will...
1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut
Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
This soft key tag is made of a sturdy material that is thick yet pliable, and comes with a spiral key ring.
Reproduction of the original outer door mirror designed for use with various 1967-72 Chevrolet models. Each mirror is manufactured from durable die-cast zinc and finished to match factory specifications for a precise fit and...
1967-70 Camaro, Firebird; Bucket Seat Side Bracket Covers; Black ; Pair
Reproduction of the original bucket seat side bracket covers designed for use on 1967-70 Camaro and Firebird models. Bucket seat side bracket covers are manufactured from injection molded ABS material in the correct...
1955-80 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1967-74 Carpet Firewall Guard ; Camaro, Nova, Firebird, Ventura
Highly detailed injection molded reproduction carpet firewall guard for various 1967-74 GM models. Each carpet guard is manufactured in quality injection molded ABS and features the correct thickness and weight. This guard is...
1964-73 GM; Sun Visor Support Bracket; Coupe; with Hardware; Die-Cast; Each
High quality reproduction of the original interior sun visor support bracket designed for use with various 1964-73 Buick, Chevrolet, GMC, Pontiac and Oldsmobile models. Each sun visor bracket is manufactured in quaility...
1967-69 Camaro, Firebird; Convertible Top Frame Assembly; with Power Top
Reproduction convertible top frame designed for use with 1967-69 Chevrolet Camaro and Pontiac Firebird models equipped with a power top. This complete steel frame assembly includes fully reinforced hinge mechanisms, latch...
1965-67 Corvair, 1967 Camaro, Firebird; Door Lock Knob Ferrules; Clear Plastic; Pair
Correct reproduction clear plastic door lock knob ferrules for 1965-67 Corvair, and 1967 Camaro, Firebird models. Each ferrule is manufactured in injection molded clear ABS plastic that replicates the original in quality and...
1965-67 Nova, Corvair, 1967 Camaro, Firebird; Front Door Arm Rest Pad; Black; RH or LH; Each
OER® Reproduction of the original front arm rest pad designed for use with various 1965-67 GM models including 1965-67 Corvair, Chevy II Nova, and 1967 Camaro and Firebird models. Each arm rest pad is manufactured in...
1967 Camaro, Firebird; Subframe Assembly; OEM Style; without Trans Crossmember
Why waste money trying to repair a damaged subframe that may be compromised internally when you can replace it with this high-quality Restorer's Choice™ reproduction. This reproduction subframe assembly is designed and...
1966-73 GM; Inner Rear View Mirror ; 8" ; Polished Stainless ; Various GM Models
OER® reproduction of the original inner rear view mirror designed for use on various GM models. This reproduction mirror is manufactured to factory specifications and replicates the original in fit and appearance. This 8"...
OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...