1967 Camaro SS, 1968-72 Nova SS Hood Louvers; Pair; "Show Quality"
FEATURED

Product#: 3918764

1967 Camaro SS, 1968-72 Nova SS Hood Louvers; Pair; "Show Quality"

Reproduction of the original hood louvers designed for use with all 1967 Camaro SS, and 1968-72 Nova SS models. Each hoold louver is manufactured in quality die-cast zinc replicating the original design, appearance, and...


Product#: 3910667

1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; LH; Driver Side

Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...


Product#: 3891606

1967 Camaro; Hood Release Assembly; Standard Hood

Reproduction of the original hood latch assembly for use with 1967 Camaro models. Each hood release is manufactured to factory specifications featuring the correct latch and spring mechanism. Will bolt directly to any...


Product#: B200

1967-69 Camaro/Firebird, 66-79 Nova Fiberglass Hood Springs-Low Tension

Never have to use a 'prop' rod on your trick looking fiberglass hood again. These lower tension springs will allow you to retain the original workings of your hood. Never ask for help just to get under the hood. These springs...


Product#: 3938693

1967-68 Camaro; Hood Lock Catch Support

Reproduction hood lock catch support for 1967-68 Camaro models. The hood latch catch support is located between the grill and radiator support. This support also helps to strengthen the entire front section of the vehicle....


Product#: 3965713

Hood Prop Rod For Fiberglass Hood

Hood prop required when installing a fiberglass hood on you Camaro. Since hood springs are not recommended when using fiberglass hoods, this prop is essential for keeping your hood open while working in the engine...


Product#: 3907627

1967-69 Camaro Cowl Induction Hood Spring

Reproduction of the original 1969 Camaro cowl induction hood spring. Can also be used for 1967-68 Camaro models with cowl hoods. Manufactured to exact dimensions from premium grade spring steel with a black chromate finish...


Product#: 3857882

1967-81 Camaro, 1965-68 Impala, 1968 Chevelle; Hood Latch Pop-Up Spring

Quality reproduction of the original hood pop-up spring designed for use with 1967-81 Camaro, 1965-68 Impala, Bel Air, Biscayne, Caprice, and 1968 Chevelle, El Camino models. Measures 3-3/4" long and features a black EDP...


Product#: *R1383

Hood Insulation Fastener; 5/16" Stem Diameter; 3/4" Stem Length; 1-3/4" Head Diameter; 20-Pieces

Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most...


Product#: K1006

Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; For Hood Hinges; 10-Pieces

Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...


Product#: K1005

Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; For Hood Hinges; 8 Piece Set

OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"- 16 x 1" specs....


Product#: 3848272

1963-72 Chevrolet Hood Hinge Spring;

Reproduction of the original hood hinge spring designed for use with various GM models including Camaro, Impala, Firebird and other various GM models. Each spring is designed and manufactured to exact factory specifications...


Product#: 3910668

1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; RH; Passenger Side

Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...


Product#: 409025

1966-79 GM; Hood Hinge Spring ; Each ; Various Models

Correct replacement hood hinge spring designed for use with various 1966-79 GM models with a standard hood. Each hood hinge spring is manufactured in quality spring steel that matches the OE tension ratio.Sold individually. 2...


Product#: 3921811

1967-68 Camaro; Hood Release Latch Assembly; with Rally Sport

Reproduction of the original hood latch assembly for use with 1967-68 Camaro Rally Sport models. Each hood release is manufactured to factory specifications featuring the correct latch and spring mechanism. Will bolt directly...


Product#: B210

Fiberglass Hood Springs-Medium Tension

Never have to use a 'prop' rod on your trick looking fiberglass hood again. These medium tension springs will allow you to retain the original workings of your hood. Never ask for help just to get under the hood. These...


Product#: K555

1958-77 GM; Hood Adjuster Bolt and Nut Set ; 5/16"-18 x 1-3/8"; Various Models

Reproduction of the original hood stop bolt and nut set designed for use on various 1958-77 GM models. This bolt and nut set will keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct...


Product#: 3792828

1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models

Reproduction of the original hood adjustment bumpers designed for use on various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated,...


Product#: K551

1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set ; Various Models

Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...


Product#: 3949698

1967-72 Hood Louver Gasket ; Each ; Camaro ; Nova

Reproduction of the original hood louver gaskets that seals the hood louvers to the hood. These special gaskets are manufactured to precisely replace the old or worn originals. Prevents water and other elements from seeping...