OER Parts Restoration Parts and Accessories - Accelerator Components

Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...

This special mounting pin is just what you need to correct a loose accelerator pad. This special design allows the pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems commonly...

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

OER® reproduction of the original accelerator firewall bushings designed for use on various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive...

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Reproduction of the original accelerator pedal pad designed for use on various Chrysler, Dodge and Plymouth A, B, C, and E-body models. This injection molded ABS pedal pad is an accurate reproduction of the original pad...

This is a correct reproduction of the commonly missing or worn out accelerator return spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Chevrolet Applications:...

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Camaro models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Reproduction of the original accelerator assembly designed for use with 1969 Ford Mustang and Mercury Cougar models. Extends from the firewall and comes with the accelerator pedal, pedal mount pin and spring, accelerator rod,...

Reproduction of the original accelerator pedal for 1973 B, C, and E-Body models. Manufactured with the correct details and grain texture for an authentic appearance. Includes pedal only. Correct for 1973 B, C, E-Body, but...

Reproduction of the original accelerator pedal rod designed for use on 1967 Firebird models with V8 engines. The pedal rod is the final link in your Firebird models accelerator/throttle activation system. This special rod...

Correct reproduction of the original accelerator throttle arm designed for use on 1967 Pontiac Firebird V8 models. Manufactured in stamped steel to OE specifications, each throttle arm features correct contours that provide...

Reproduction accelerator pedal pad for 1964-66 Chevrolet and GMC trucks. Each accelerator pedal pad is manufactured in a plastic material to original specifications and features the correct original style waffle pattern at...

Reproduction of the original accelerator pedal rod support for use on the various applications listed. Each support is manufactured in injection molded ABS offering an exact replacement of the original. Applications:...

Reproduction accelerator pedal for Dodge and Plymouth A, B, C and E-body models. This injection molded ABS pedal set includes pedal, spring, spacer pad for rear of pedal, and installation pin for a complete replacement of...

OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...

Reproduction of the original accelerator pedal pad rod designed for use on Camaro and Nova models. This rod connects between the throttle arm and the accelerator pedal. Manufactured in correct configuration, replaces the bent...

Reproduction of the original accelerator pedal pad designed for use on 1962-65 Dodge and Plymouth models. This quality reproduction is manufactured with an OEM style embedded steel core offering an authentic appearance and...

Reproduction accelerator linkage for 1964-68 V8 Mustangs or 1967-68 V8 Cougar equipped with manual transmission. This linkage connects your accelerator pedal to the accelerator rod. It mounts to your firewall and includes the...

Reproduction of the original accelerator pedal for 1973-74 Barracuda, 'Cuda and Challenger models. Manufactured with the correct details and grain texture for an authentic appearance. Includes pedal and hardware. Mopar...

Reproduction of the original accelerator throttle cable bracket for use on 1970-72 Camaro and Firebird models with Holley Carburetors. This quality bracket is manufactured in stamped steel to the original factory...

Reproduction of the original accelerator pedal mounting hardware designed for use on 1973-74 Mopar B, C and E-Body models. These components are used used to attach the accellerator pedal pad. Includes the pedal tension...

Reproduction accelerator pedal pad for 1967-70 Chevrolet & GMC pickup. Blazer, Jimmy, and Suburban models with standard interiors. Each pad is manufactured in injection molded ABS material to original specifications and...

Reproduction of the original accelerator linkage designed for use with 1966-68 V8 Mustangs or 1967-68 V8 Cougar equipped with automatic transmission. This linkage connects your accelerator pedal to the accelerator rod. Mounts...

Reproduction of the original accelerator pad to rod support designed for use on 1967 Firebird models. This is the support that bolts to the firewall and holds the accelerator pedal shaft. This item will replace your often...

This is the complete accelerator pedal assembly which extends from the firewall on all V8-equipped vehicles with cowl induction. This assembly comes complete with the accelerator pedal, pedal mount pin and spring, accelerator...

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....

Reproduction of the original accelerator pedal bezel designed for use on various 1971-72 Reproduction of the original accelerator pad bezel designed for use on Mopar A,B,C-Body and E-Body models. Each accelerator pedal bezel...

Reproduction of the original accelerator pedal rod designed for use with 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod...

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Reproduction of the original accelerator pad, bezel and hardware designed for use on Dodge and Plymouth A, B and E-body models. This injection molded ABS accelerator pedal pad set includes the pedal pad, stainless steel...

Reproduction of the original accelerator pedal pad designed for use on 1966-70 Belvedere, Charger, Road Runner, Satellite and Superbird B-Body models. This quality reproduction is manufactured in hard rubber material...

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van ...

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth A body models with 383, 440 engines. Each cable is manufactured to correct factory specifications replicating the original...

Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Each accelerator pedal pad is manufactured in quality hard EPDM rubber unlike the plastic service replacement...

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Reproduction of the original style stamped steel accelerator pedal pad to rod support unit. This steel reproduction is manufactured to replicate the original in appearance, design and functionality. Includes correct style...

Reproduction of the original accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, grip, and polished stainless steel trim. For various 1964-72 models as listed. Replaces Ford part #...

Reproduction of the original accelerator pedal pad designed for use on various 1967 GM models. This accelerator pedal pad is manufactured in the correct design based on a steel backing unlike the GM plastic replacements. The...

Correct reproduction accelerator pedal pad stainless trim plate for various 1965-71 GM vehicles. Each trim plate is manufactured in stamped stainless offering long lasting dependability and an authentic appearance. This...

Reproduction of the original accelerator pedal hardware designed for use on 1971-72 A/B/C/E-Body Mopar models. Components are designed to attach the accelerator pedal to the vehicle. This hardware set includes the pedal...

Reproduction of the original accelerator assembly designed for use with 6 cylinder or dual carburetor Camaro models. Extends from the firewall and comes with the accelerator pedal, pedal mount pin and spring, accelerator rod,...

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body Hemi models. Each cable is manufactured to correct factory specifications replicating the original in design and...

Reproduction of the original accelerator pedal pad, chrome trim and mnounting hardware designed for use on 1973 Mopar B,C, and E-Body models. Manufactured exactly as original including the correct grain texture for an...

Reproduction of the original 1968-69 accelerator pedal rod designed for use with 396 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is...

Reproduction of the original 1968-69 accelerator pedal rod designed for use with 327 or 350 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is...

Original factory ball stud pivot designed for use on various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing...

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth B and E body big block (400, 426, 440) models as listed. Each cable is manufactured to correct factory specifications...

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body small block (318, 340, 360, 383) models as listed. Each cable is manufactured to correct factory specifications...

OER® Authorized reproduction upper kickdown clip for models with powerglide automatic transmission. Connects the upper passing gear kickdown rod to the bellcrank assembly. Applications: 1967-69 Camaro with Powerglide...

Reproduction of the original throttle linkage designed for use 1955-59 V8 Chevrolet and GMC trucks. Manufactured to OE specifications and zinc plated for long lasting dependibility. Goes from the accelerator pedal, through...

Reproduction of the original throttle arm designed for use on 1968-69 Camaro models. Each throttle arm is produced to replicate the original in quality and fit. Replace your worn out or damaged original throttle arm with this...

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...

If you want to add a custom appearance to your pedal pads, this Billet aluminum pedal set is what you want! Each pedal unit is manufactured in quality Billet aluminum offering a unique and custom appearance that will enhance...

Reproduction of the original pedal pads with trim designed for 1969 Firebird models. This pedal pad and trim set is designed to replace the worn out original pads for 1969 Firebird models with automatic transmissions....

Reproduction of the original pedal pads designed for use on 1976-81 Camaro, Firebird and various other GM models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual...

Reproduction of the original carburetor return spring for 1968 GM cars with Special/HIPO big block engines. Manufactured in the correct green color. Applications: 1968 Camaro Z28 with 302 or 396 1968 Chevelle SS with 396...

Reproduction of the original throttle cable designed for use on 1968-72 Dodge and Plymouth A Body models as listed. This reproduction throttle cable is designed for use with 273/318/340 engines. Connects the accelerator...

New OEM factory 1967 Pontiac Firebird throttle lever. This is the throttle arm that is used only on 1967 Firebird models. Sold individually. {fitment}

Aluminum racing pedal set designed for use with 1979-04 Ford Mustang models equipped with a manual transmission. Accelerator pedal measures 2-3/8" x 5-3/8"; brake and clutch pedals measure 2-1/2" x 3-1/2"; foot rest pedal...