1968 Camaro; Front Fender; Standard RH Passenger Side; GM Tooling; Limited Supply
OER® reproduction fenders manufactured from the original GM tooling! Each Restorer's Choice™ reproduction fender will install correctly and is produced using high grade steel. This part features a black...
1968 Camaro RS; Front Fender; Rally Sport; RH Passenger Side; GM Tooling; Limited Supply
OER® reproduction fenders manufactured from the original GM tooling! Each Restorer's Choice™ reproduction fender will install correctly and is produced using high grade steel. This part features a black...
1969-70 Oldsmobile Cutlass, 442; Ram Air Fiberglass Hood; Steel Framing Underside
Reproduction of the functional fiberglass Ram Air Hood for 1969-70 Oldsmobile Cutlass and 442 models. This Ram Air Hood features the steel frame and injection molded fiberglass upper and functional Ram Air section like the...
1964 Impala, Bel Air, Biscayne; Hood Assembly; Stamped Steel; Bolt On; EDP Coated
OER® reproduction of the original Chevrolet Impala and full-size all-steel hood. Manufactured to exact factory specifications, this hood is designed to replace the original exactly and includes the correct pre-drilled...
1969 Chevrolet Camaro; Complete Quarter Panel; Coupe; LH Driver Side
Reproduction complete quarter panel for 1969 Camaro coupe models. Each panel is precision-manufactured in high-quality stamped steel to original factory specifications for an authentic fit and finish. Unlike a simple quarter...
1978-81 Camaro; Rear Body Panel Extension
Add a performance appearance to your 1978-81 Camaro with this one piece wrap-around rear body panel extension for 1978-81 Chevrolet Camaro models. This item is manufactured in quality, automotive-grade urethane material that...
1970-73 Camaro Rally Sport; Front Valance Panel; EDP Coated
Reproduction of the original front valance panel designed for use with 1970-73 Camaro models equipped with the Rally Sport (RS) split bumper front end. Each panel is stamped from high-quality automotive-grade steel and built...
1969 Firebird Convertible; Complete Quarter Panel; RH Passenger Side
Reproduction complete quarter panel for 1969 Firebird convertible models. Each quarter panel is manufactured in quality stamped steel and matches the original in quality and fitment. Not just a replacement skin, this panel...
1967 Pontiac Firebird; Complete Quarter Panel; Convertible; LH Driver Side
Reproduction of the original complete quarter panel specifically designed for 1967 Firebird convertible models. Each panel is precision-stamped from high-quality steel and manufactured to exact factory specifications for a...
1969 Pontiac Firebird; Complete Rear Quarter Panel; Coupe; RH Passenger Side
Reproduction of the original complete quarter panel specifically designed for use on 1969 Firebird coupe models. Each quarter panel is manufactured in quality stamped steel and matches the original in quality and fitment. Not...
1968 Pontiac Firebird: Complete Rear Quarter Panel; Coupe; LH Drivers Side
Reproduction of the original complete quarter panel specifically designed for use on 1968 Firebird coupe models. Each quarter panel is manufactured in quality stamped steel and matches the original in quality and fitment. Not...
1967 Pontiac Firebird; Complete Rear Quarter Panel; Coupe; Coupe; LH Driver Side
Reproduction of the original complete quarter panel specifically designed for 1967 Firebird coupe models. Each panel is precision-stamped from high-quality steel and manufactured to exact factory specifications for a precise...
1968 Pontiac Firebird: Complete Rear Quarter Panel; Coupe; RH Passenger Side
Reproduction of the original complete quarter panel specifically designed for use on 1968 Firebird coupe models. Each quarter panel is manufactured in quality stamped steel and matches the original in quality and fitment. Not...
1967 Pontiac Firebird; Complete Rear Quarter Panel; Coupe; RH Passenger Side
Reproduction of the original complete quarter panel specifically designed for 1967 Firebird coupe models. Each panel is precision-stamped from high-quality steel and manufactured to exact factory specifications for a precise...
1969 Pontiac Firebird; Lower Carburetor Pan; Ram Air III; Steel
Reproduction of the original lower carburetor pan designed for use with 1969 Pontiac Firebird models with Ram Air hood. This pan is manufactured in quality die-stamped steel with single heat pick up from exhaust manifold....
1974-1977 Camaro; Front Header Panel; Fiberglass Reproduction
Reproduction of the original header panel for use with all 1974-77 Chevrolet Camaro models regardless of trim level. This reproduction panel is manufactured in injection-molded fiberglass as opposed to urethane. This is the...
1964 Pontiac GTO; Chrome Hood Scoop Inserts; Pair
New reproduction hood scoop inserts for 1964 Pontiac GTO models. These scoops inserts are made from high quality diecast and are chrome plated. Sold in pairs.
1969 Oldsmobile Cutlass, Cutlass Supreme, 442, F85; Hurst Model; Fiberglass Hood Scoop
Reproduction authentic factory hood scoop for 1969 Oldsmobile Cutlass Cutlass Supreme, 442 and F85 Hurst models. It is made out of injection molded reinforced fiberglass. It has ten mounting studs to mount in all factory...
1968-70 Pontiac GTO; Hood Scoop Inserts; Plastic Reinforced Fiberglass; Open Style for Ram Air; Pair
Pair of Injection molded scoops that are plastic fiberglass reinforced for 1968-70 Pontiac GTO models. These reproductions are exactly like the originals and will accept the flapper door on 1969-70 Ram Air equipped models....
1970-71 Pontiac GTO; Rear Valance Panel; Dual Cutouts For Exhaust
Replacement rear valance panel wirth dual cutouts for the exhaust pipes. This panel is made from steel. This panel fits 1970-71 GTO models. It can be used on 1972 GTO if the is run to exit the rear.
1968-70 Dodge Charger; Rear Lower Corner Panel; RH Passenger Side
This reproduction rear lower corner panel is installed between the quarter panel and the rear lower valence panel. Features correct gauge sheet metal and a black electrophoretically deposited coating (EDP, or E-coat) for...
1970-72 PontiacLeMans, 1972 GTO; Rear Valance Panel
Reproduction new OEM replacement rear valance for 1970-72 Pontiac LeMans and 72 GTO models. It is made of ABS plastic like the OEM will never rust and is ding proof. All mounting tabs are there for installation. Sold...
1970-72 Pontiac GTO, LeMans; Front Fender Patch Panel; RH Passenger Side
Reproduction new lower fender patch panel for 1970-72 Pontiac GTO and LeMans models. This item will replace the lower part of the fender. It is complete with inner brace. It is very large in size. 18-1/2" tall and 17" wide at...
1974-81 Camaro; Trunk Drop Off Lower Side Panel; RH
Reproduction of the original inner lower trunk drop off extension for use with 1974-81 Camaro models. Manufactured in quality stamped steel to correct dimensions including the trunk plug drain hole. This panel is located...
1978-88 Buick Regal; Inner Bucket and 45/55 Split Bench Seat Mounts; 4 Piece Set
Reproduction of the original inner 45/55 bench and bucket seat mounts designed for use with 1978-88 Buick Regal and GM G-Body models. The seat mounts are manufactured to original factory specifications. Will work when...
Reproduction of the original trunk side brace for 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. This brace mounts under the upper trunk floor at the outer edge, next to the wheelhouse. Each brace is...
1967 Chevy II, Nova; Rocker Panel Molding Mounting Studs; Set of 40
Reproduction rocker panel molding mounting studs for 1967 Chevy II and Nova models. This complete set includes 40 high quality mounting studs, providing the correct amount needed to attach both the RH and LH rocker moldings...
1978-88 Chevrolet; Oldsmobile, A & G Models; Floor Hump Panel; with Manual Trans; Various GM Models
Reproduction manual transmission floor hump for 1978-88 GM A/G-Body models. This part is a direct replacement for manual transmission models and very useful for manual transmission conversions. Features and Benefits: Stamped...
1970 Pontiac GTO; Center Valance Panel Bracket; Support
This is a new reproduction of the front valance center support Y style bracket that mounts in the center of the valance & bolts to the core support on 1970 GTO models. This bracket is commonly missing or damaged. Sold...
1970 Chevelle, Malibu; Headlamp Extension Mounting Bracket Set
Reproduction headlamp extension mounting bracket for 1970 Chevrolet Chevelle and Malibu. These brackets attach to the core support and the headlamp fender extensions near the grille, providing the correct mounting point and...
1968 Camaro RS; Front Fender; Rally Sport; LH Driver Side; GM Tooling; Limited Supply
OER® reproduction fenders manufactured from the original GM tooling! Each Restorer's Choice™ reproduction fender will install correctly and is produced using high grade steel. This part features a black...
1976 Pontiac Trans Am; Front Header Panel; Fiberglass Reproduction
Reproduction of the original front header panel designed for use on 1969 Pontiac Trans Am models. Painstakingly reproduced in durable, high-strength automotive-grade fiberglass, this panel delivers a factory-authentic...
1968 Camaro; SYC 427 Yenko Hood; Fiberglass; OER Reproduction
Once upon a time, the only way to obtain this hood was to purchase the entire vehicle from a Yenko dealership. This fiberglass reproduction is an exact duplicate of the original hood installed on all 1968 Yenko SYC 427 Camaro...
1967 Camaro; SYC 427 Yenko Hood; Fiberglass; OER Reproduction
Once upon a time, the only way to obtain this hood was to purchase the entire vehicle from a Yenko dealership. This fiberglass reproduction is an exact duplicate of the original hood installed on all 1967 Yenko SYC 427 Camaro...
1974-77 Camaro; Front Lower Valance Panel; with Lower Center Spoiler; Fiberglass
Fiberglass replacement for the original style lower valance panel with center spoiler to fit 1974-77 Camaro models. This panel is manufactured in quality, automotive grade fiberglass as a replacement for damaged original...
1982-84 Camaro Z28; Fiberglass Hood
Fiberglass reproduction of the original GM hood for 1982-84 Chevrolet Camaro Z28 models with non-functional scoop. This bolt-on OE-style Z28 hood features factory-style underside bracing for an authentic fit and appearance....
1974-77 Camaro; Lower Valance Panel; without Lower Center Spoiler; Fiberglass
Reproduction of the original style rear lower valance panel designed for use with 1974-77 Camaro models without the center spoiler. This panel is manufactured in quality, automotive-grade fiberglass that replicates the...
1974-75 Pontiac Trans Am; Front Header Panel; Fiberglass Reproduction
Reproduction front header panel for 1974-75 Pontiac Trans Am models. Expertly manufactured from durable, high-strength automotive-grade fiberglass, this panel replicates the original with precision detail and structural...
1974-75 Pontiac Trans AM; Front End Lower Valance Panel; Fiberglass Reproduction
Reproduction of the fiberglass front end lower valance panel for 1974-75 Pontiac Trans Am models. Precision-molded from high-strength, automotive-grade fiberglass, this valance panel is designed to replace cracked, warped, or...
1970-72 Oldsmobile Cutlass "S", 442 Coupe; Trunk Lid/Deck Lid
Reproduction rear trunk/deck lid for Oldsmobile F85, Cutlass "S" and 442 models coupe only will not fit Supreme. This quality reproduction trunk/deck lid is produced to OEM specifications for superior fitment and is EDP...
1969 Chevrolet Camaro; Complete Quarter Panel; Coupe; RH Passenger Side
Reproduction complete quarter panel for 1969 Camaro coupe models. Each panel is precision-manufactured in high-quality stamped steel to original factory specifications for an authentic fit and finish. Unlike a simple quarter...
1970-73 Pontiac Trans Am; Lower Front Valance Panel; Fiberglass Reproduction
Reproduction of the original front lower valance panel designed for use on 1970-73 Pontiac Trans Am models. Painstakingly manufactured from high-strength automotive-grade fiberglass, this panel replicates the original in...
1970-76 Pontiac Trans Am; Functional Shaker Hood Scoop Kit
Reproduction of the original and complete functional hood scoop assembly originally designed for use with 1970-72 Pontiac Trans Am models with the optional Shaker intake, and also compatible with 1973-76 Trans Am models. Each...
1968 Pontiac Firebird Convertible; Complete Rear Quarter Panel; LH Driver Side
Reproduction complete quarter panel for 1968 Firebird convertible models. Each panel is precision-stamped from high-quality steel to factory specifications, providing a superior fit and authentic appearance. Unlike a simple...
1967 Pontiac Firebird; Complete Rear Quarter Panel; Convertible; RH Passenger Side
Reproduction of the original complete quarter panel specifically designed for 1967 Firebird convertible models. Each panel is precision-stamped from high-quality steel and manufactured to exact factory specifications for a...
1967 Chevrolet Camaro Convertible; Complete Rear Quarter Panel; LH, Driver Side
Reproduction complete quarter panel for 1968 Camaro convertible models. Each panel is manufactured from high-quality stamped steel to exact factory specifications, providing an authentic fit and finish. Unlike a simple...
1970-73 Camaro; RS Front Header Panel, with Rally Sport; EDP Coated
Quality reproduction front header panel engineered for 1970-73 Chevrolet Camaro models equipped with the Rally Sport (RS) package. Stamped from high-grade automotive steel, this panel faithfully replicates the original in...
1969 Pontiac Firebird; Complete Rear Quarter Panel; Coupe; LH Driver Side
Reproduction of the original complete quarter panel specifically designed for use on 1969 Firebird coupe models. Each quarter panel is manufactured in quality stamped steel and matches the original in quality and fitment. Not...
1982-84 Camaro; Rear Body Panel Extension; 2 Piece Design
Add a racing look to the rear profile of your third-gen Camaro with this premium 2-piece rear body panel extension, specifically engineered for 1982?1984 models. This extension delivers the fit and detail offering an upgraded...
1970-81 Camaro, Firebird; Cowl Top Vent Grill Screen; GM Licensed
OER® reproduction of the original cowl top vent grill screen designed for use on 1970-81 Camaro and Firebird models. Manufactured in quality injection molded ABS to factory specifications for a perfect fit. Replaces the...
1970-72 Buick Skylark, GS, GS 455; Front Lower Spoiler; Valance Panel
Front lower spoiler/valance panel for 1970-72 Buick Skylark, GS 455 and GS models. This spoiler attached to the bottom of the front bumer to help with aerodynamics and more importantly directing fresh cool air through the...
1969 Firebird, Trans Am; Front Lower Baffle Panel; Plastic Version
Reproduction of the original front lower baffle panel for use with 1969 Firebird Trans Am models. This baffle is used to close off the bottom area between the front valance panel and the core support. This item also helps...
1967-68 Firebird, Trans Am; Front Lower Baffle Panel; Plastic Version
Reproduction front lower baffle panel for 1969 Firebird Trans Am models. This baffle is used to close off the bottom area between the front valance panel and the core support. This item helps eliminate overheating, pushing...
1981-88 Chevrolet Monte Carlo SS; Lower Fender Extension; Pair; GM# 16502366/16502365
Reproduction lower fender extension with the holes for marker lights for 1981-88 Chevrolet Monte Carlo SS models. Manufactured using urethane just as the OEM. These extensions attach to the frone lower portion of the fender...
1968-70 Dodge Charger; Rear Lower Corner Panel; LH Driver Side
This reproduction rear lower corner panel is installed between the quarter panel and the rear lower valence panel. Features correct gauge sheet metal and a black electrophoretically deposited coating (EDP, or E-coat) for...
1967-68 Camaro, 1967 Firebird Fender Extension; RH
When purchasing reproduction parts and accessories from OER® you can be sure that each and every product displaying the Restorer's Choice ™ symbol is manufactured correctly to exact specifications, fits the way the...
1967-68 Camaro, 1967 Firebird Fender Extension; LH
When purchasing reproduction parts and accessories from OER® you can be sure that each and every product displaying the Restorer's Choice ™ symbol is manufactured correctly to exact specifications, fits the way the...
1970-72 Pontiac Tempest, LeMans, GTO; Fender Patch Panel 19"; With Welded On Brace; LH
Reproduction of the original style fender patch repair panel with welded on bracing for 1970-72 Pontiac GTO, LeMans and Tempest models. Manufactured in quality stamped steel that replicates the original panel configuration....
1970-72 Pontiac GTO, LeMans; Rear Bumper Valance Panel; Bracket Set; 9pcs
New set of brackets to mount rear valance on 1970-72 GTO and Lemans models. This is used on steel or plastic valance panels. Outer bracket gets welded to the car. Center brackets get screwed to the body. You will now be able...