OER Parts Restoration Parts and Accessories - Bumper Components

Excellent reproduction of the original rear body to bumper weatherstripping designed for use on 1965-65 Chevy II and Nova models. The bumper to body seal strip is designed to seal and fill the area where the rear bumper meets...

Reproduction of the original front bumper corner mounts for use with 1969 Camaro models. Each mount features a stamped steel base plate with a molded-on rubber cushion that installs between the front bumper and the bumper...

Correct reproduction of the original outer bumper brackets designed for use with 1969 Camaros that included the urethane front Endura bumper option. The brackets are manufactured in quality stamped steel to OE specifications...

Excellent reproduction of the original body seal strip designed for use with 1968-72 Chevy II and Nova models. This strip is designed to seal and fill the area where the rear bumper meets the body. This often damaged or...

This kit has all the necessary hardware to install a 1971, 1972 or 1973 Mustang rear bumper. (1973 is for use on Mustangs without bumper guards) Attention to detail was taken to ensure that it fits and functions like the...

Reproduction of the original front and rear bumper designed for use with 1969 Camaro models. This kit includes the front Endura style urethane bumper that was designed as an alternative to the chrome bumper and offers a...

Excellent reproduction of the original body seal strip used to seal and fill the area where the rear bumper meets the body. This often damaged or missing part should be replaced to keep any water or other elements out.

Reproduction rear bumper reinforcement for 1979-93 Mustang models. Manufactured to factory specifications for proper fitment and function. Comes with EDP coating for rust and corrosion prevention. {fitment} Note: Ships...

Reproduction of the original 3 piece set front bumper with 2 piece bumper guards designed for use on 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Designed and manufactured after the original GM bumper featuring triple...

Quality reproduction of the original chrome front bumper guards designed for use with 1964-66 Mustang models. Each bumper guard is manufactured in stamped steel and triple chrome plated for a lusterous appearance. Sold in...

Quality reproduction of the original front bumper filler designed for use with 1986-90 Chevrolet Caprice models. Each bumper filler is manufactured to original factory specifications replicating the original in appearance and...

Reproduction of the original center rear bumper bracket designed for use on 1968 Chevrolet Camaro models. This bracket is manufactured in stamped steel replicating the original in quality, design and fitment. Features correct...

Exact reproduction of the original rear bumper guard designed for use with 1969 Camaro models. Manufactured in quality die-cast zinc featuring a beautiful triple chrome plated finish. This is the deluxe style rear bumper...

Reproduction of the rear bumper bracket designed for use with 1969 Camaro models. Manufactured to correct specifications that replace the original rear bracket exactly. This individual center bracket is manufactured in the...

Correct reproduction of the original front bumper impact bar for use with 1979-81 Pontiac Firebird and Trans Am models. Replication of the original OE impact bar. Installs behind the front urethane bumper cover and impact...

Reproduction of the steel bar that installs behind the front bumper cover as the main front bumper understructure. Manufactured in stamped steel to OE specifications. Applications: 1982-1982 Chevrolet Camaro Note:...

Reproduction front bumper filler for 2003-06 Silverado, 2007 Silverado Classic, and 2003-06 Avalanche models. Produced in injection molded plastic and is designed to replicate the original bumper filler on the front bumper....

Reproduction of the original srtle front bumper reinforcement support for 1987-93 Fox body models. Manufactured to factory specifications in rigid composite materials for proper fitment and function. {fitment} Note: Ships...

Reproduction of the original front bumper outer brackets designed for use on 1969 Camaro models with chrome bumper. Each bracket is manufactured in stamped steel replicating the original in fit and design. Sold as a pair. ...

Reproduction of the original rear lower chrome bumper guard, sometimes known as a bumperette designed for use on 1967-68 Camaro models.  Each bumper guard is manufactured in heavy-duty cast than chrome plated matching the...

Reproduction of the original front bumper guard brackets designed for use on 1969 Camaro models. Each bracket is manufactured in stamped steel replicating the original in fit and design. Sold in pairs. Applications:...

Reproduction of the hardware for # K335 to mount the deluxe rear bumper guards on 1967-68 Camaro models. Set consists of 2 - 3/8-16 x 1" bolt, 2 - 3/8-16 x 3/4" bolts and 4 - 3/8 split lock washers. Enough to mount both rear...

This hardware kit contains the necessary body bolts to attach the 1970-72 Chevrolet Camaro front bumper brackets to the frame. The bolts are the correct grade and are phospate treated for corrosion resistance. Included in...

This reproduction front bumper bracket kit includes 2 inner, 2 outer brackets and corner mounts for 1968 models. Note: No further discounts apply.

Reproduction of the original rear bumper guards designed for use with 1970-72 Plymouth Barracuda and Cuda models. Enhance the appearance of your Barracuda or Cuda by removing your pitted or damaged originals and installing...

Correct reproduction of the original outer front bumper bracket designed for use with 1968 Camaros. This stamped steel reproduction is manufactured to exact dimensions and will install original or reproduction front bumpers. ...

Reproduction of the original license plate / fuel door stoppers used for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note:...

Reproduction of the fiberglass rear bumper filler for 1979-81 Trans Am models.

High quality reproduction front bumper fillers designed for use on 1977-78 Firebird Trans Am models. Manufactured using quality fiberglass materials Made in USA

Reproduction of the original rear bumper guard brackets designed for use on 1967-68 models. Manufactured to correct factory dimensions, these brackets will mount 2 rear bumper guards. Guard extends above and below the bumper...

Reproduction of the original front inner bumper cushion designed for 1970-72 Camaro standard models, and 1970-73 Camaro Rally Sport models. Each bumper bracket cushion is manufactured in quality RPDM molded rubber replicating...

Reproduction of the original rear bumper guards designed for use with 1970-72 Dodge Challenger models. Enhance the appearance of your Challenger by removing your pitted or damaged originals and installing these beautiful...

Reproduction stamped steel bumper bracket for 1967-68 Mustang. This front bumper bracket is accurately produced to fit the LH (outer side) inner position on a 1967-68 Mustang. Comes finished in a black EDP coating to protect...

Reproduction of the original steel bar that installs directly behind the rear bumper cover for use with 1982-92 Camaro and Firebird models. This bumper impact bar acts as a barrier upon impact. Will replace the original...

Reproduction of the fiberglass front bumper filler for 1979-81 Trans Am models.

Reproduction of he original rear bumper end bracket designed for use on 1957 passenger car models. Manufactured in stamped steel to factory specifications. EDP coated for rust prevention. This bracket mounts to the bumper...

Reproduction of the original rear bumper guard mounting brackets for use on the longer style rear bumper guards. These brackets are used to mount each bumper guard to the bumper. Comes complete with two mounting brackets. For...

Reproduction front bumper brackets for 1960-66 1/2 and 3/4 ton 2WD truck models. Painted with a rust preventative coating.⁕ Fits right hand (passenger) side. ⁕ Many sheet metal products are delivered with a...

Reproduction of the original front bumper reinforcement designed for use with 1994-98 Mustang models. Manufactured to factory specifications for proper fitment and function. Come EDP coated for rust prevention. {fitment} ...

Correct reproduction of the original outer front bumper bracket designed for use with 1968 Camaros. This stamped steel reproduction is manufactured to exact dimensions and will install original or reproduction front bumpers. ...

Reproduction of the original front bumper guard brackets designed for use on 1967-68 Camaro models. Each bracket is manufactured in stamped steel replicating the original in fit and design. Sold in pairs. Applications:...

Excellent reproduction of the original bumper guards designed for use on all 1970-73 Camaros including standard or Rally Sport models. Each guard is manufactured to quality stamped steel to original factory specifications...

Reproduction of the original 1967-68 rear bumper guard designed for 1967-68 Mustangs. This is a direct fit replacement of the original. Features holes that are needed in order to install the bumper guard rubber inserts (sold...

Reproduction front bumper reinforcement for 1999-04 Mustang models. Manufactured to factory specifications for proper fitment and function. Comes with EDP coating for rust and corrosion prevention. {fitment} Note: Ships 2...

Reproduction front bumper filler for 2003-06 Silverado, 2007 Silverado Classic, and 2003-06 Avalanche models. Produced in injection molded plastic and is designed to replicate the original bumper filler on the front bumper....

Reproduction of the original front bumper guards designed for use with 1970-72 Chevrolet Camaro standard models (except Rally Sport). Each guard is manufactured to original factory specifications in quality heavy duty stamped...

Reproduction front bumper brackets for 1960-66 1/2 and 3/4 ton 2WD truck models. Painted with a rust preventative coating.⁕ Fits left hand (driver) side. ⁕ Many sheet metal products are delivered with a black...

This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 3/8"-16 x 1" and features a stainless steel cap. Head diameter 7/8". Shoulder length...

Reproduction of the original front bumper brackets designed for use on 1966-67 Chevy II and Nova models. Each bracket is a duplicate of the original GM bracket and includes correct contours and mounting holes in the correct...

Reproduction of the original front bumper to frame bracket set for 1973-80 Chevrolet and GMC truck models. Manufactured to factory specifications featuring correct mounting points for proper fitment, and come EDP coated for...

Reproduction of the inner front bumper bracket designed for use with 1969 Camaro models with chrome bumper. This bracket is manufactured in stamped steel to exact dimensions with all necessary holes pre-drilled for...

Reproduction of the original front bumper guards for use with 1955-59 Chevrolet pickup truck models. Each bumper guard is manufactured to factory specifications replicating the original in quality, appearance and design....

Reproduction of the original front bumper reinforcement panel designed for use with 1969 Firebird and Trans Am models. Each reinforcement panel is manufactured in stamped steel to original factory specifications featuring...

Reproduction of the original front bumper filler panel designed for use with 1981-82 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. The front bumper filler panel is susceptible to damage whever minor accidents...

Replacement of the front bumper filler panel for 1985-90 Pontiac Trans Am GTA models. Manufactured from fiberglass, this mounts underneath the bumper cover for support. Made in the U.S.A. Note: Shipped oversize.

OER® Authorized reproduction of the original filler panel designed for use with 1954-1955 Chevrolet Pickup, Suburban and Panel truck models. Each panel is manufactured in stamped steel to original factory specifications...

Reproduction front bumper filler for 2011-14 Silverado 2500 and 3500 models. Produced in injection molded plastic and is designed to replicate the original bumper filler on the front bumper. Replaces Partslink # GM1088178, or...

Reproduction of the original front bumper filler panel designed for use with 1989-91 Chevrolet and GMC Blazer, Jimmy, and Suburban models. This easily damaged part is now available in reproduction. The front bumper filler...

Reproduction of the original front bumper guards for 1967-68 Camaro models. Manufactured to exact factory specifications assuring a quality appearance and fit. Features bright triple chrome plating. Includes both LH and RH...