All Makes All Models OER - Back-Up Lamps

Reproduction of the original Impala and Bel Air rear tail lamp housings designed exclusively for use on 1965 Impala / Bel Air models. Manufactured in stamped steel as original and includes the pre-attached lens-to-housing...

Reproduction of the original rear back-up lamp lens designed for use on 1970-71 Camaro models (except RS). Features correct SAE and Guide lettering for an authentic appearance. Includes correct outer chrome trim ring. This...

Reproduction of the original rear back-up lamp lens designed for use on 1972-73 standard Camaro models. Manufactured to correct OE specifications featuring correct "pillow" style back up lens. Each lens includes an original...

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. Replacement lens screws used on various GM vehicles. Most 1965 and later GM vehicles used...

Reproduction of the original rear back-up lamp lens designed for use on 1970-71 Rally Sport Camaro models. Features correct SAE and Guide lettering for an authentic appearance. Includes correct outer chrome trim ring. This...

Reproduction of the original Charger clear back-up lamp lens designed for use on all 1971 Charger and Super Bee models. Each lens is injection molded using quality acrylic materials and manufactured to exact factory...

Reproduction RS back-up lamp assemblies for 1967-68 Camaro RS models. Features correct polished chrome housing, bulb socket with 8" lead and the original type molded rubber boot. Assemblies include: housing to body gasket,...

OER reproduction of the original RS back up lamp lens for 1969 Camaro Rally Sport models. Also used by the factory as an original cargo lamp lens for 1969-72 Chevrolet and GMC pickup. This clear acrylic lens features all the...

OER® reproduction of the original rear tail light and back-up lamp bezels designed for use on 1965 Bel Air and Biscayne models. This superb reproduction is manufactured to exact specifications and will replace the...

Reproduction of the original tail lamp lens trim set and ornaments designed for use on 1965 Impala and full size models. Trim ring set is manufactured to exact specifications and will replace the pitted or rusted originals....

Reproduction of the original gaskets designed for use with all 1967-1968 lower Rally Sport back-up lamp assemblies. Inserts between the back up housing and rear body panel. Manufactured with quality EPDM rubber compound...

Reproduction of the original back-up lamp assemblies designed for use on 1969-70 Mopar B Body models. Back up lamps are manufactured to OE factory specifications replicating the originals in quality and fitment. Includes the...

Reproduction of the original rear back-up lamp lens designed for use on 1972-73 standard Camaro models. Manufactured to correct OE specifications featuring correct "pillow" style back up lens. Each lens includes an original...

Reproduction of the original rear tail lamp and back up lamp housings designed exclusively for 1965 Bel Air and Biscayne models. Manufactured in zinc plated steel material as original and includes the pre-attached...

Restorer's Choice reproduction of the original rear tail light lenses designed for 1962-64 Chevy II and Nova models. Each lens is manufactured to correct foactory specifications using quality injection molded acrylic lens...

OER® reproduction of the original inner tail lamp and backup lamp lenses (includes mounting clips) designed for 1979-81 Firebird Trans Am models. Meticulously manufactured to exact specifications, each injection molded lens...

Reproduction of the original backup housing designed exclusively for 1965 Chevrolet Biscayne models. Manufactured in stamped steel to the correct factory configuration ensuring a perfect fit. The housing includes pre-attached...

OER reproduction of the original inner and outer tail lamp lenses designed for the LH and RH sides on 1971 Charger and Super Bee models (except R/T). Each set also includes the clear backup lenses (pair). Each lens is...

Reproduction of the original tail lamp lenses and housings designed for use with 1984-87 Buick Grand National models. All components are manufactured to replicate the original in quality, design and fitment. This...

Save when ordering a complete set of tail lamp and back-up lamp lenses for your 1971-73 Camaro RS. This kit features lenses with chrome trim rings and includes 2 tail lamp lenses and 2 back-up lamp lenses with the late1971...

Reproduction of the original rear back-up lamp lens designed for use on 1967-72 Fleetside pickup trucks, 1969-72 Blazer, and 1970-72 GMC Jimmy models. Each lens is manufactured in injection molded clear acrylic ABS lens...

Reproduction of the original back up lamp housing designed for use on 1967-68 Camaros with the Rally Sport option. This complete assembly will replace the lower back up lamp housing for the drivers side. Includes correct...

Reproduction of the original back up lens designed for use on 1966-67 Chevy II and Nova models. Each lens is manufactured in quality clear acrylic lens material to factory specifications. Each lens features original SAE and...

Reproduction of the original back-up lamp lens designed for use on all 1984-87 Regal, Grand National, Type-T and GNX models. Each back-up lens is manufactured from quality acrylic material that offers an authentic appearance...

Reproduction of the original rear back-up lamp lens designed for use on 1970-71 Rally Sport Camaro models. Features correct SAE and Guide lettering for an authentic appearance. Includes correct outer chrome trim ring. This...

Reproduction of the original rear tail lamp housings designed exclusively for use on 1965 Biscayne models. Manufactured in stamped steel as original and includes the pre-attached lens to housing gasket and housing to body...

Reproduction of the original tail lamp assembly designed for use with 1984-87 Buick Regal, Limited, T Type, and GNX models. All components are manufactured to replicate the original in quality, design and fitment. This...

OER® supurb die-cast reproduction of the original tail lamp lens trim bezel for 1963 Impala models. Each reproduction bezel is manufactured in a crisp, detailed die cast and features a brightly polished chrome finish. ...

Reproduction of the original standard back up lamp lens designed for use on 1968 Camaro models without the RS option. Lenses are manufactured with quality injection molded acrylic lens material. Each lens features correct...

A complete assembly to replace the both passenger and drivers side back-up lamp assemblies on 1969 Camaro Rally Sport models. Includes correct chrome housings, housing to body gaskest, lenes, lens gaskets, bulbs, sockest...

Reproduction of the original rear tail light lenses designed for use on 1962-64 Chevy II and Nova models. Each lens is manufactured to correct foactory specifications using quality injection molded acrylic lens material....

Reproduction of the original rear back-up lamp lens designed for use on 1972-73 Camaro Rally Sport models. Manufactured to correct OE specifications featuring correct "pillow" style back up lens. Each lens includes an...

OER® reproduction of the original tail lamp lens assembly designed for 1979-81 Firebird Trans Am models. Meticulously manufactured to exact specifications replicating the original tail lamp lens in every detail! Features...

Reproduction of the original tail lamp lenses and back up lens set for 1970 Dodge Challenger models. Each lens set is manufactured in quality injection molded red and clear acrylic material that offers an authentic appearance...

Save when ordering a complete set of tail lamp and back-up lamp lenses for your 1970-71 Camaro standard model. This kit features lenses without chrome trim rings and includes 2 tail lamp lenses and 2 back-up lamp lenses with...

Reproduction of the original RS back up lens designed for use with all 1967-68 RS Camaro models. Manufactured in quality acrylic clear lens material for an authentic appearance and fit. Features all original SAE and "Guide"...

Reproduction of the original back-up / reverse lamp lens for 1970 Dodge Challenger models. This reproduction lens is manufactured to original factory specifications using quality injection molded acrylic lens material....

Save when ordering a complete set of tail lamp and back-up lamp lenses for your 1970-71 Camaro RS. This kit features lenses with chrome trim rings and includes 2 tail lamp lenses and 2 back-up lamp lenses with the early 1971...

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. Replacement lens screws used on various GM vehicles. Most 1965 and later GM vehicles used...

Reproduction of the original shouldered lens screw set designed for use on various GM applications. Each screw is chrome-plated for corrosion resistance for an outstanding appearance. 4 piece set. ; #8-32 x 11/16" ; with 3/8"...

OER® reproduction of the original rear tail light and back-up lamp bezel designed for use on 1965 Impala models. This supurb reproduction is manufactured to exact specifications and will replace the original exactly....

Reproduction of the original rear back-up lamp lens designed for use on 1967-72 Fleetside pickup trucks, 1969-72 Blazer, and 1970-72 GMC Jimmy models. Each lens is manufactured in injection molded clear acrylic ABS lens...

Correct reproduction of the original back up lamp gaskets for use with 1969 Camaro RS models. These OEM style gaskets install between the housing and rear body panel. Includes 2 gaskets. Applications: 1969-1969 Chevrolet...

Reproduction RS back-up lamp assemblies for 1967-68 Camaro RS models. Features correct polished chrome housing, bulb socket with 8" lead and the original type molded rubber boot. Assemblies include: housing to body gasket,...

Reproduction of the original tail lamp and backup housing designed exclusively for 1965 Chevrolet Impala and Bel Air models. Manufactured in stamped steel to the correct factory configuration ensuring a perfect fit. The...

Reproduction of the original tail lamp and backup housing designed exclusively for 1965 Chevrolet Impala and Bel Air models. Manufactured in stamped steel to the correct factory configuration ensuring a perfect fit. The...

Reproduction of the complete back up lamp assembly designed for use on 1969 Rally Sport Camaro models. Manufactured to factory specifications including correct chrome housing, housing to body gasket, lens, lens gasket, bulb,...

Reproduction of the original back up lamp housing designed for use on 1967-68 Camaros with the Rally Sport option. This complete assembly will replace the lower back up lamp housing for the passenger side. Includes correct...

Reproduction of the original rear tail lamp lens and back-up lamp lens set designed for 1965 Impala models. This 6-piece rear lens set includes 4 rear red tail lamp lenses and 2 back-up lenses. These injection molded lenses...

Reproduction of the original tail lamp lens trim ring designed for use with 1965 Impala and Full Size Chevrolet models. Manufactured in stainless steel featuring a btighly polished chrome finish. This chrome plated ring...

Reproduction of the original rear back up lamp lens designed for use on 1968-69 Chevrolet Nova models. Manufactured in quality acrylic injection molded lens material that replicates the original in design and appearance....

Reproduction of the original back-up lamp lens designed for use on all 1984-87 Regal, Grand National, Type-T and GNX models. Each back-up lens is manufactured from quality acrylic material that offers an authentic appearance...

Reproduction of the original tail lamp lenses and housings designed for use with 1984-87 Buick Grand National models. All components are manufactured to replicate the original in quality, design and fitment. This...

OER® supurb die-cast reproduction of the original tail lamp lens trim bezel for 1964 Impala models. Each reproduction bezel is manufactured in a crisp, detailed die cast and features a brightly polished chrome finish. ...

Reproduction of the original standard back up lamp lens designed for use on 1967 Camaro models without the RS option. Lenses are manufactured with quality injection molded acrylic lens material. Each lens features correct SAE...

Reproduction standard lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. 4 piece set. Reproduction of the 1969 Dart park lamp lens screws. Replacement lens screws...

Reproduction of the original back-up rear light lens designed for use on 1968 Impala (non SS) and Bel Air models. Correct reproduction features 1 ring and factory style SAE markings for complete authenticity. Sold...

Reproduction of the original rear back-up lamp lens designed for use on 1972-73 Camaro Rally Sport models. Manufactured to correct OE specifications featuring correct "pillow" style back up lens. Each lens includes an...

Reproduction 1966-70 B-Body reverse light switch. Manufactured to exacting standards, this reverse lamp switch will fit and function as original. Fits a variety of Dodge and Plymouth B-Body hardtop and convertible models...

OER reproduction of the original back up lens designed for use on 1965 Impala models. This lens is manufactured in injection molded acrylic matching the original in quality and appearance. Features all the correct SAE and...