1967-69 Camaro, Firebird; Upper Fan Shroud Bracket; with Hardware
Reproduction of the original fan shroud bracket designed for use with 1967-68 Camaro (big block), 1967-69 Camaro (small block), and 1967-69 Firebird models. Manufactured in stamped steel to factory specifications and EDP...
1972-92 GM Radiator Coolant Jar Cap
OER® reproduction of the original radiator overflow bottle cap designed for use with various GM models. Each cap is manufactured in injection molded ABS to factory specifications. Features the words "ENGINE COOLANT ONLY"...
1978-79 Camaro; Radiator Overflow Jar; Vented
OER® reproduction of the original radiator overflow jar designed for use on all 1978-79 Camaro models. Manufactured in clear and white plastic and features the correct fluid level and part number markings as original....
1969-70 Nova; Fan Blade; 5 Blade; Big Block; 396; with "W" Stamping
Exact reproduction of the original correct fan blade designed for use with 1969-70 Nova models with big block 396 engine. This 5 blade fan was original used on 1969-70 Yenko and COPO models and features the factory correct...
1973-78 Oldsmobile Cutlass, Cutlass Supreme, 442; Radiator Overflow Reservoir/Tank KIT
Reproduction of this rare dealer installed accessory which was used until 1972 which all 455 Cutlass came stock. This kit will fit all 1968-72 Cutlass Supreme S W-30 W-31 or Hurst Olds with a 350, 400 or 455 motor. Kit...
1973-74 B-Body 28" Fan Shroud with HD Cooling
OER reproduction injection-molded fan shroud for 1973-74 Dodge and Plymouth B-Body models with heavy duty cooling. Each shroud is an exact replica of the original Mopar part, featuring the factory-style ribbed design for...
1967-69 Charger, Coronet, GTX, Road Runner; Fan Shroud; For 26" Radiator; 383, 426, 440
Restore your Mopar cooling system with this high-quality reproduction fan shroud for 1967-69 Dodge and Plymouth B-body models. Manufactured from durable injection-molded ABS to exact factory specifications, this shroud...
1965-66 Impala, Bel Air, Biscayne, Caprice; Steel Fan Shroud; 283ci, 327ci; 396ci, 427ci
Reproduction stamped steel fan shroud for 1965-66 Impala, Bel Air, Biacayne, and Caprice models with various engines. Designed to replace the original fan shroud when used with an OEM specification radiator. Measures 28" wide...
1968-73 Dodge, Plymouth B, C, E-Body; Clutch-Style Fan Blade
Reproduction clutch-style cooling fan for 1968-73 Mopar B, C, and E-body models. The fan has a 2.5" diameter center hole, while the tip to tip measurement of the fan blades is 18.5", and the fan blades' width is 3-15/16"....
1969-74; Camaro, Impala, Nova; Upper Radiator Hose; with GM Markings
Restore authentic cooling system performance and factory-correct underhood detail with this reproduction upper radiator hose for select 1969-74 Chevrolet small block applications. Precision molded from premium grade rubber to...
1967-68 Camaro; Lower Radiator Hose; 8 cylinder; except SS models; with GM Markings
Restore authentic cooling system performance and factory-correct underhood detail with this reproduction upper radiator hose for 1967-68 Camaro small block engine applications. Precision molded from premium grade rubber to...
1970-72 Buick Skylark, GS, Sportwagon; Radiator Overflow Reservoir/Container
Reproduction coolant reservoir/container for 1970-72 Buick Skylark, GS and GS 455 models. Each coolant reservoir jar is manufactured to correct dimensions featuring the correct shape and mounting points. Includes cap.
1975-97 GM Radiator Overflow Jar Cap ; Non-Vented ; Reproduction
OER® reproduction of the original non-vented radiator overflow jar cap for various GM models ranging from 1975-1997. Each cap features the correct wording "ENGINE COOLANT ONLY" on the cap in the correct font. Replace you...
1969-79 Camaro, Impala, Nova, Corvette; High Performance Fan Clutch; 7-1/4"
Reproduction, application specific, factory-style high performance thermal fan clutch for various 1969-79 Chevrolet vehicles with 7-1/4" diameter fan clutch. This reproduction is not a cookie-cutter universal part. Each fan...
1964 Impala, Bel Air, Biscayne; Steel Fan Shroud; 283ci, 327ci; Small Block
Reproduction of the original steel radiator fan shroud for Impala and full size Chevrolet models equipped with a small block engine. Each fan shroud is designed to replace the original and includes the proper hole locations...
Reproduction of the application specific, factory-style thermal fan clutch for various 1964-90 Chevrolet and other GM models. Each fan clutch is designed to replicate the original in design, appearance, and fit. Includes...
1964-67 Pontiac GTO, LeMans, Tempest; 18" 7 Bladed Fan; Radiator Cooling
Replacement new 18" fan blade for 1964-67 Pontiac GTO, LeMans and Tempest models with 326, 389 and 400 Pontiac engines. The 4 blade fan can now be replaced with this heavy duty 18" 7 blade fan with aluminum blades. This fan...
1969-72 Oldsmobile Cutlass, 442; Top Plate; Radiator Support
Reproduction steel radiator top plate for 1969-72 Oldsmobile Cutlass, 442, Hurst Olds, W30 and W31 models with 350, 400 and 455 engines and heavy duty cooling. It Fits 4-speed and automatic transmission applications. Made...
1975-79 Nova, Ventura, Apollo, Skylark; Radiator Overflow Jar
Correct reproduction of the original radiator overflow jar for 1975-79 Nova and GM X-Body models. Manufactured using the correct blowform method, each jar is produced in clear plastic material and features correct lettering...
Reproduction radiator fan shroud for 1967-72 Chevrolet and GMC pickup truck, Blazer, Jimmy, and Suburban small block models with factory air conditioning and 2 wheel drive. Each fan shroud is manufactured in injection molded...
1968-74 Firebird, Trans Am; Flex Fan; 5 Blade; 19"; 350, 400, 455
Reproduction of the original style flex fan blade for use with 1968-74 Firebird and Trans Am models with Ram Air 350, 400, and 455 engines. Each fan blade unit is manufactured to factory specifications replicating the...
1970-72 Buick Skylark, GS; Radiator Support Rust Repair Kit; RH
Radiator core support rust repair kit for 1970-72 Buick Skylark and GS models. This is a 3 piece kit to repair the sheetmetal around and under the battery tray on the RH side. These are commonly rusted out. Right...
1970-81 Camaro, Firebird; Lower Radiator Hose; 267ci, 305ci, 307ci, 350ci; Small Block; GM Markings
Restore factory-correct cooling system performance and authentic underhood detail with this reproduction radiator hose for 1970-81 Camaro small block models and 1977-1981 Firebird models equipped with Chevrolet small block...
1969 Camaro SS; Lower Radiator Hose; 396 Big Block; With GM Markings
Reproduction of the original lower radiator hose designed for use on 1969 Camaro big block (396) models. This radiator hose is precision molded from premium grade rubber to match the OE configuration. Each hose is...
Reproduction thermostat housing for various 1966-76 Dodge and Plymouth models as listed. Available for all V8 models including 273ci, 318ci, 340ci, 360ci, 361ci, 383ci, 400ci, 426ci, 440ci and all the way up to Hemi engines....
1962-68 Chevy, GMC Truck, Corvette, Camaro; Water Pump Pulley; Double Groove; Reproduction
Reproduction double groove stamped steel one-piece service replacement style water pump pulley for a wide variety of GM applications including 1967-68 Z28 Camaro, 1962-68 Corvette, and 1962-68 Chevrolet and GMC truck. Finally...
1973-81 Firebird; Radiator Overflow Jar Cap ; Blue Lettering
Reproduction of the original radiator overflow jar cap for use with 1973-81 Pontiac Firebird models. Manufactured to exact specifications and featuring correct black cap with blue lettering. "Radiator Cooling Only" verbiage...
Reproduction double groove stamped steel water pump pulley for 1966 Corvette with 427ci, and 1965-66 Chevelle with 396ci Big Block engines without AC. Finally a quality reproduction is available to replace the very rare,...
Reproduction water pump pulley for various 1969-70 Pontiac models including GTO, Lemans, Tempest and Firebird, Trans Am models with Ram Air III, or Ram Air IV models without power steering or AC. Replace your bent, missing or...
1968-72 Chevy II, Nova; Fan Shroud Bracket; Big Block 396
A correct reproduction of the original fan shroud bracket for use with 1968-72 Chevy II Nova big block (396) models. This unique bracket was installed exclusively with big block engines and factory installed radiators on...
1969-70 Firebird; Water Pump Pulley; V8; 2-Groove; Without AC; 8-1/8" dia; 350, 400, 455; 9799127
Reproduction 2-groove water pump pulley for 1969-70 Firebird and Trans Am V8 models, without AC, with power steering. This 8-1/8" diameter pulley features correct markings 9799127XF. For use with 350, 400, 455, and most 428...
1969-70 Chevy Nova; Lower Radiator Hose; Big Block; 396ci; with GM Markings
Restore factory-correct cooling system performance and authentic underhood detail with this reproduction lower radiator hose for 1969-70 Chevrolet Nova 396 big block models. Precision molded from premium grade rubber to match...
1969-74 Chevy Nova; Lower Radiator Hose; 307ci, 350ci; Small Block; with GM Markings
Restore factory-correct cooling system performance and authentic underhood detail with this reproduction lower radiator hose for 1969-74 Nova small block models. Precision molded from premium grade rubber to match the OE...
1969-73 Camaro, Chevelle, Nova; Water Pump Pulley; Deep Single Groove; 3976060
Reproduction of the factory water pump pulley for various 1969-73 models. This single groove pulley measures approximately 6-1/4" in diameter. Fits 1969-70 Camaro Z/28, 1970-71 Camaro, 1970-73 Z/28 350 Special High...
1967 Pontiac Bonneville, Catalina, Firebird, GTO, Lemans; Water Pump Pulley; 2-Groove; 8" Diameter
Reproduction 2-groove water pump pulley for 1967-68 Pontiac models as listed below. Measures 8" diameter. Replaces original GM part number # 9786819.
Keep your overflow bottle from leaking with this all new OER® reproduction overflow bottle cap. Each overflow cap is manufactured to exact specifications using injection molded tooling. Features the recovery hose fitting...
1974-80 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Radiator Overflow Jar
OER® reproduction of the original radiator overflow jar designed for use on 1974-80 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models. Manufactured from blow formed molded ABS, this overflow jar offers an...
1966 Pontiac; Water Pump Pulley; Double Groove; 7" diameter
Reproduction double groove water pump pulley for 1966 Pontiac full size, and GTO, Lemans models. This double groove pulley measures approximately 7" in diameter. Number stamped on pulley is 9782679.
Reproduction steel radiator top mounting panel for 1968-72 Chevrolet Chevelle, El Camino and 1970-72 Monte Carlo models with heavy duty cooling. Manufactured from stamped steel with the correct welded reinforcement tab....
1969 Camaro; Upper Radiator Hose; 396ci Big Block, COPO; with AC; GM Markings
Restore factory-correct cooling system performance and authentic underhood detail with this reproduction upper radiator hose for 1969 Camaro big block (396) models with air conditioning. Precision molded from premium grade...
1966-67 Chevy II, Nova; Upper Radiator Hose ; 327ci, L79 Hi Perf; without AC; GM Markings
Restore the correct underhood look and dependable cooling system function with this correct reproduction upper radiator hose for 1966-67 Chevy II and Nova models equipped with the L-79 327 engine without air conditioning....
Replace worn, deteriorated cooling system components with this superb reproduction upper radiator hose. Designed to replicate the original, it fits 1960-63 Chevrolet Truck models with an 8 cylinder engine and select 1966-68...
1969 Camaro Z28; Water Pump Pulley; 7-1/16" Diameter; Single Groove; Deep Groove; 3932456
Quality reproduction deep groove water pump pulley for 1969 Camaro Z28 (302) models. This pulley is manufactured to exact factory specifications. Fits 1969 Z28 models with 302-290hp engine.
1969-81 Camaro, Cutlass, Firebird, Nova Chevy, GMC Truck ; Fan Spacer; for Fixed Fan; 1"
Correct reproduction of the original style 1" fan spacer designed for high performance motors without a fan clutch. Each fan spacer is manufactured to OE specifications and precision-machined to ensure correct...
1965-67 Pontiac GTO, LeMans, Tempest; Radiator Fan Finger Guard / Filler; RH Passenger Side
Replacement steel guard that covers the fan blade on the core support. The hole is on the right side. This guard comes with the correct bend on the lower right hand corner. Fits 1965-67 GTO, LeMans and Tempest models Sold...
1967-81 Buick, Chevy, Pontiac, Oldsmobile; Radiator Overflow Hose Retainer Clip
Reproduction radiator overflow hose retainer clip for various 1967-81 Chevrolet, Buick, Oldsmobile, and Pontiac models. Each retainer clip is manufactured to factory specifications from spring steel, replicating the original...
1977-79 Firebird, Trans Am; Upper Radiator Hose; with GM Markings
Replace worn, deteriorated cooling system components with this superb reproduction upper radiator hose for 1977 Pontiac Firebird models with 305 engines and 1978-79 models with 403 engines. Manufactured to correct...
1967-81 Camaro, 1967-69 Firebird, 1968-74 Nova; Radiator Support Bushing & Hardware Set
The subframe bushings are essential when rebuilding the front end. One of the most common wear points is the radiator support bushings, which can cause misalignment and vibration if deteriorated. This reproduction set...
1969-78 Chevrolet; Water Pump Pulley; with AC; 1-Groove; Small or Big Block; 6-1/4" O.D.
Reproduction water pump pulley for 1969-78 Chevrolet small block or big block passenger car and 1973-78 Chevrolet and GMC truck models. This is a single groove pulley that measures approximately 6-1/4" in diameter. OE number...
1965 Impala, Bel Air, Biscayne; Upper Radiator Hose; Small Block; V8; 283ci, 327ci
Correct reproduction of the original upper radiator hose for 1965 Impala, Bel Air, and Biscayne small block V8 models without factory air conditioning. Each hose is manufactured to correct factory specifications and...
1970 Chevrolet Big Block; Water Pump Pulley; Long Pump; Shallow Single Groove; 6-1/4" O.D.; 3976059
Reproduction factory long water pump pulley for 1970 Camaro 396 big block engines and various other Chevy applications. This is a single groove pulley that measures approximately 6-1/4" in diameter. For models with or without...
1969 Camaro, Impala, Nova; Water Pump Pulley; Big Block 396/375hp; 1 Groove; w/Long Pump
Reproduction water pump pulley for 1969 Camaro, Nova, Chevelle, El Camino, Impala, Bel Air, Caprice models with 396/375hp engines. Each pulley is manufactured in stamped steel and features the correct part number stamping and...
1978-88 Chevrolet Monte Carlo, 1978-87 El Camino, 1978-83 Malibu; Radiator Overflow Reservoir
Reproduction radiator coolant reservoir container/tank for 1978-80 Regal, 1978-87 El Camino, Malibu, Monte Carlo, Cutlass, Bonneville and Grand Prix models. Each coolant reservoir jar is manufactured to correct dimensions...
1964-70 Pontiac; Aluminum Water Neck; 2 or 4 bbl.; with OE Stamping
Reproduction of the original aluminum thermostat housing water neck designed for various 1964-70 Pontiac models with 2 bbl and 4 bbl carburators. Each housing replaces the original exactly and features correctly stamped...
Don't entrust the life of your engine to old hoses suffering from dry-rot and deterioration. Protect your cooling system by replacing your worn original radiator hose with this superb reproduction. Manufactured to correct...
1970-74 GM; Fan Spacer; For Fixed Fan; 2-9/32"
Correct reproduction of the original style 2-9/32" (2.28") fan spacer designed for engines without a fan clutch. Each fan spacer is manufactured to OE specifications. Measures 2-9/32" thick excluding the fan locator / pilot....
1969-81 GM; Fan Spacer; For Fixed Fan; 1-15/16"
Correct reproduction of the original style 1-15/16" fan spacer designed for engines without a fan clutch. Each fan spacer is manufactured to OE specifications. Measures 1-15/16" thick excluding the fan locator / pilot. Bolt...
1969-81 Buick, Chevrolet, Pontiac, Oldsmobile; Lower Radiator Hose; Various GM Models
Replace worn, dry-rotted cooling system components with this quality molded OER® lower radiator hose for various GM models. Designed with the correct configuration and routing, it includes the internal spring to help...
1969-70 Impala, Bel Air, Caprice, 1967-68 Camaro; Molded Lower Radiator Hose; 8 Cylinder
Correct reproduction lower radiator hose for 1969-70 Chevrolet full size, 1967-68 Camaro 327ci, 350ci. Each hose is manufactured to correct factory specifications and replicates the original in quality and fitment. Features...
1964-77 Oldsmobile Cutlass, 442; Thermostat Housing; Cast Iron
Relacement thermostat housing for 1964-77 Cutlass, 442 models with 260, 307, 330, 350, 403, 400, 425 and 455 engines. This housing is made of cast iron and has the bypass hose fitting. sold individually.