Dodge Charger Parts - Electrical & Wiring

Reproduction of the hard-to-find switch to replace original inoperative headlamp switch on 1976-78 Chevette. This reproduction switch will fit exactly as original and is designed as a service replacement for original GM part...

Universal fit headlamp switch for a wide variety of vehicle applications from the 1940's and beyond. Each switch features 3 position push/pull functionality with knob and shaft. Required a 3/8 diameter hole for mounting, and...

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Service replacement turn signal switch for various 1969-88 GM models. Located in the steering column this switch will aid in the prevention of accidents by warning other vehicles that you intend to turn. Fits a wide variety...

This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will...

Reproduction of the original wiring harness designed for use on 1965-70 GM models including 1967-69 Camaro and Firebird models. This reproduction wire gutter is used to hold the engine harness as it passes against the...

This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will...

OER reproduction of the Dodge horn cap emblem installed on 1968-69 Dart, Charger, Super Bee, Coronet, Polara and Monacos equipped with a standard or wood grain style steering wheel. Manufactured from high quality injection...

Correct OER® reproduction of the Sparton horn assemblies designed for various 1968-74 Mopar models. Each horn assembly is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch....

Correct OER® reproduction of the Sparton horn assemblies designed for various 1967-71 Mopar models. Each horn assembly is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch....

Reproduction of the battery tray for 1966-69 Mopar B-Body models. Stamped steel battery tray features the correct contours as original and is EDP coated for rust protection.

This replacement voltage limiter is designed to provide a 5-volt supply and circuit protection up to 18-volts. This limiter will work with reproduction gauges, as well as factory gauges, and it?s required when using...

Reproduction turn signal lever for 1966-67 Dodge and Plymouth B-Body vehicles. Features a nice chrome plated finish.

Reproduction of the original power window switch designed for use on 1973-76 Mopar Dodge, Plymouth and Chrysler models. This switch is manufactured with a concave style button and includes the correct grain and surrounding...

Reproduction headlamp switch for various 1975-99 Mopar models. This 9 terminal switch is produced with an older style ceramic rheostat with metal spring contact (rather than the newer printed circuit board style rheostat) for...

Reproduction ignition switch with 9 blade-style terminals for a variety of 1977-87 Chrysler, Plymouth, and Dodge car and truck models. Authentic connectors will match the plugs and wiring ends on your original wiring harness....

Reproduction negative battery cables for 1970-72 Dodge and Plymouth models. Cables feature correct lead length and markings. Applications 1970-71 B-body 383/440/440+6 1970-71 E-body 383/440/440+6 1972 B-body 400/440

OER Reproduction of the original horn switch unit fits a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded ABS same as the original Mopar contact. An excellent replacement...

Reproduction alternator spacers for most Mopar models. Alternator spacers fit between the alternator bracket and the block. Fits big block and small block Dodge and Plymouth models. Sold as a pair. One pair required.

Reproduction of the original horn contact set designed for use on various 1964-74 Chrysler, Dodge and Plymouth models (except Imperial). Each contact set is manufactured with OE-grade materials that replicate the original in...

Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...

Replacement battery tray brace for 1966 and 1970-74 Dodge and Plymouth models. Manufactured to original specifications and dipped in corrosion resistant primer. Includes correct j-nut. Mounting bolt not included. ...

Reproduction headlamp switch for various 1975-99 Mopar models. This 9 terminal switch is produced with a printed circuit board style rheostat (rather than a ceramic rheostat with metal spring) for dimming the instrument lamps...

Due to the corrosive nature of battery electrolyte, the original lead cast positive and negative terminal ends usually require replacement every few years. We offer these replacement OEM type terminals for use on top post...

Reproduction of the original power window switch designed for use on 1969-77 Mopar Dodge, Plymouth and Chrysler models designed to install in the drivers side front door. This switch is manufactured with original style...

Reproduction of the original style turn signal switch for 1967-71 Mopar A, B & E-Body models without tilt steering wheel. This switch is manufactured to exact factory specifications and comes with metal connectors attached to...

Reproduction of the original power window switch designed for use on 1969-77 Mopar models. This switch is manufactured with a concave style button and includes the correct grain and surrounding bezel. Each switch is a direct...

Reproduction of the original power window switch designed for use on 1977-78 Mopar Dodge, Plymouth and Chrysler models. This switch is manufactured with a Convex style button and includes the correct grain and surrounding...

Reproduction of the original power window switch designed for use on 1977-78 Mopar Dodge, Plymouth and Chrysler models. This switch is manufactured with a Convex style buttons and includes the correct grain and surrounding...

Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...

OER reproduction of the original turn signal switch designed for use with 1963-66 Mopar A and B-Body models without tilt steering wheel. Each turn signal switch replicates the original allowing a complete replacement of the...

Replacement battery mounting hardware for 1972-74 Dodge and Plymouth models. Replace damaged or missing components with quality replacement parts. Each set will include all necessary hardware to secure the battery to the...

OER Reproduction horn switch to fit a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded material just like the original Mopar item. An excellent replacement switch to help...

Economical service replacement horn contact assembly that fits a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded ABS just like the original Mopar contact. An excellent...

OER reproduction of the original die-cast metal horn button retainer that fits a wide variety of Chrysler, Plymouth, and Dodge models equipped with the Tuff Wheel steering wheel. Produced in die-cast metal just like the...

Replacement single terminal door jamb switch designed for use on various models. Replace the old, damaged or non working door jamb switch with this quality service replacement. The door jamb switch will get your interior...

Replacement battery cables for 1970-74 Dodge and Plymouth models. Cables feature correct lead length. The positive cable assemblies are manufactured like the original and will include the additional wires necessary for the...

Reproduction battery cables for 1969-70 Dodge and Plymouth big block models with 1-piece molded starter lug. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original...

Reproduction of the original headlamp switch assembly designed for use on 1966-67 Dodge Charger and Coronet models. This complete headlight switch assembly includes the electrical switch, bezel and headlamp knob with correct...

Reproduction "Final Design" turn signal switch for 1967-71 Mopar A, B, C, & E-Body models without tilt wheel. This switch comes with metal connectors attached to the ends of the wires and includes the plastic connector for a...

Replacement starter relay for all 1966-69 Mopar models with MT. This relay mounts on the inner fenderwell near the battery. Applications: 1966-69 Mopar A, B & E-Body (All models with manual transmission)

Reproduction headlamp switch for various 1962-81 Mopar A and B-Body models and other models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used on...

Reproduction of the original headlamp switch designed for use on 1968-69 Dodge Charger models. Each switch replicates the original in design and functionality. Will replace the old or non working headlamp switch exactly. ...

Replacement starter relay for all 1966-74 Mopar models. This relay mounts on the inner fenderwell near the battery. Applications: 1966-74 Mopar A, B & E-Body (All except 1966-69 models with manual transmission)

Repproduction of the original battery mounting hold down set designed for use on various 1966-69 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction....

Reproduction of the dash dimmer switch designed for use on 1968-70 Dodge and Plymouth B-Body models. This OEM style dimmer switch assembly features a chrome plated thumb-wheel surrounded by a die-cast body and a ceramic...

Replacement door jamb switch for use on various 1968-92 GM models. This 2 terminal switch is manufactured to fit and function as original and specifically designed for the models listed below. Replacing this switch will help...

This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will...

Reproduction of the original battery mounting hold down set designed for various 1970-1976 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction. Each...

Clean up the wiring in your engine compartment with this replacement wiring strap and fastener set. Includes all of the original type fasteners and clips required to get your wiring secured and properly adhered to the...

Reproduction of the original Mopar Chrysler, Dodge, and Plymouth turn signal switch assembly designed to replace the worn out or non functioning original. Manufactured to exact specifications, each switch includes an...

Reproduction of the original turn signal switch connector designed for use with various 1963-69 Mopar vehicles. Manufactured in injection molded ABS to correct factory specifications. This connector replaces the broken and...

1959 Commuter 1959 Country Cruiser 1959 Montclair 1959 Park Lane 1959 Voyager Plymouth Applications: 1964-74 Barracuda 1959-70 Belvedere 1965-67 Belvedere II 1971-73 Cricket 1970-74 Cuda 1970-76 Duster 1960-61 Fleet Special...