1971-72 Charger, Coronet, GTX, Road Runner, Satellite; Outer Door Handle Set; Pair; Premier Reproduction; Made in the USA!
FEATURED

Product#: MB2296B

1971-72 Charger, Coronet, GTX, Road Runner, Satellite; Outer Door Handle Set; Pair; Premier Reproduction; Made in the USA!

Reproduction of the original outer door handles designed for use with 1971-72 Dodge and Plymouth B-Body models. Replaces pitted, worn or inoperative door handle assemblies. These door handles are truly the finest...


Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...


Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...


Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...


Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...


Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...


Product#: MM1007

1968-69 Dodge Charger; Front Bumper; With Bumperettes; Chrome; OER Premier; Show Quality

OER Premier chrome front bumper for 1968-69 Dodge Charger models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating that...


Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...


Product#: DW838Y

1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2-Door Hardtop, Coupe; With Smoke Gray Shaded Band

Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...


Product#: DW838T

1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2-Door Hardtop, Coupe; Tinted

Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...


Product#: DW838C

1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2 Door Hardtop, Coupe; Clear

Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop models. Replace your missing, scratched or broken original vent glass...


Product#: K51020

1962-76 GM, Dodge, Plymouth; Various Models; Convertible Top Boot Storage Bag

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...


Product#: MD2207

1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side

Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...


Product#: 3819074

1958-80 TRICO RF-15 Style Wiper Blade Refill; 15" Length; Reproduction; Various Models

OER® reproduction of the original Trico RF-15 wiper blade insert/refill for 15" TRICO wiper blades. This period-correct TRICO RF-15 style insert is made with a stainless steel vertebra and a precision wiping edge produced...


Product#: 153391

1966-84 Wiper Blade; 16" Anco Style; 1/4" Bayonet Connector; Polished Stainless; Each

Reproduction 16" wiper blade assembly manufactured to factory specifications, featuring a bright polished stainless steel finish and premium wiper insert. Fits 1/4" bayonet end wiper arms. Sold individually. Product...


Product#: DB3586C

1966-67 Dodge Charger; Back Window Glass; Clear

Replace your pitted, scratched or broken original rear window glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...


Product#: F307

1970-81 Trico-Style Windshield Wiper Blade; 3/16" Side Lock Connect; Satin Black; 18"; Pair

OER® reproduction of the original style 18" Trico windshield wiper blades designed to fit 3/16" side-lock connector arms. This blade is an exact reproduction for various GM models including 1970-81 Camaro, Firebird,...


Product#: *MM1895

1971-74 Dodge/Plymouth; B-Body; Door Hinge Set; 4 Piece Set

The doors on 1971-74 Dodge and Plymouth B-Body models were extremely heavy and hard on original hinges. Each hinge is manufactured to correct factory specifications that replicate the original in fitment, quality and design....


Product#: 11503957

U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each

Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...


Product#: 2802710

1967-74 Dodge, Plymouth; A, B-Body; Outer Door Mirror; Single Post; with Hardware; RH or LH; Each

Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...