1970-74 Various GM Vehicles; Gear Kit; Muncie M22; Close Ratio 2.20; 26 Spline; 26 Tooth
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
1965-70 Various GM Vehicles; Gear Kit; Muncie M22; Close Ratio 2.20; 10 Spline; 26 Tooth
This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...
1967-68 Camaro; Floor Shifter Assembly; ITM Style; Muncie 4/Speed
Quality OER® reproduction ITM Style shifter assembly for 1967-68 Camaro models with 4-speed transmission. Assembly will replace worn or damaged originals. This shifter mounts to your crossmember just like the factory...
1970-74 Various GM Vehicles; Rebuild Kit; Muncie 4 Speed; M20, M212, M22
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick Skylark,...
1966-70 Various GM Vehicles; Rebuild Kit; Muncie 4 Speed; M20, M21, M22
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick Skylark, and...
Reproduction of the original style shifter arm for use with various 1965-67 Chevrolet models as listed below. This unique shifter arm is an excellent replacement for a damaged original shifter mechanism. Replaces the Muncie...
1982-02 Camaro, Firebird; Round Shift Knob; Leather Wrapped; Manual Trans; Black
Reproduction of the factory original leather-wrapped shift ball to fit various 1982-02 Camaro Z28 and Firebird models equipped with 5-speed and 6-speed manual transmissions. Each reproduction shift ball is manufactured in...
1964-67 Chevrolet Chevelle, El Camino, Clutch Bell Crank; Cross Shaft, Z-Bar; Big Block Engines
What the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel. Fits 64-67 Chevelle & El Camino Big Block engines. {specs}
1970-81 Camaro / Firebird Upper Floor Shift Boot, with Manual Trans
Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction of the original style heavy weight chrome shift knob designed for use on high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1968-72 Chevy II, Nova; Shifter Stabilizer Rod Assembly
Quality reproduction of the original shifter stabilizer rod assembly for use with 1968-72 Chevy II and Nova models. Manufactured to original GM specifications, this stabilizer rod goes from the shifter assembly to the...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
1982-86 Camaro, 1991-99 Camaro, 1982-83 Firebird; Shift Knob Ball; with Manual Transmission; Black
Correct reproduction shift knob for 1982-86 Camaro, 1991-99 Camaro, and 1982-83 Firebird / Trans Am models. Each knob is manufactured to correct factory dimensions replicating the original shift knob in design, appearance,...
Highly polished triple chrome plated reproduction of the original chrome shift knob designed specifically for 1964-67 Chevelle, El Camino, Impala, Bel Air, Biscayne, Caprice, Chevy II Nova, and Malibu models with 1-3/4" dia....
1968-72 Various GM Vehicles; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
1967 F-Body Frame Side Clutch Pivot Ball Bracket
OER® Reproduction of the frame side clutch pivot ball bracket. Features the correct offset and holes as original and is used for L6, small block and big block models. Applications 1967 Camaro 1967 Firebird You...
This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...
1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst
Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...