Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...


Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...


Product#: A3178

GM Headlamp Adjuster Screw And Nut Set - 8 Pieces

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 8 Pieces - (1) adjusting screw, (1) plastic adjusting nut, (2) mounting screws with (2) washers and (2) nuts. 4 sets are...


Product#: *B1436

1962-68 Impala and Fullsize; 1/4-28 x 1" GM Headlamp Adjuster Screw With Nylon Nut; 16 Piece Set

Correct reproduction of the headlamp beam adjusting hardware set for various 1962-up GM models. Includes (8) nylon nuts, (8) 1/4"-28 x 1" adjuster screws. Each 16-piece set includes enough adjusters for both the right and...


Product#: TF400533

1955-63 Chevrolet Full Size Headlamp Retaining Ring Spring; Second Design

Reproduction of the original spring used on the headlamp retaining ring spring for various 1955-63 Chevrolet models including Tri-5, Impala and Corvette models. Replaces OE #'s 5946543, 5948814 second design.


Product#: 6027292

1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...


Product#: *B1437

1965-75 Impala / Full Size Headlamp Adjuster Screw And Nut Set

Reproduction of the headlamp adjusting hardware required for 1965-75 Impala, Biscayne, Bel Air and Caprice, as well as a variety of additional GM applications. This adjustor set contains the hardware required for proper...


Product#: A1026

1/4"-28 GM Headlight Beam Nylon Adjuster Nut

This 1/4"-28 headlight beam adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly. Fits a wide variety of GM vehicles from 1962-on. Use as required. Sold individually....


Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.


Product#: *596686

1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"

Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...


Product#: 9851

1/4"-28 GM Headlamp Adjuster Nylon Nut

This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...


Product#: A1025

1/4"-28 GM Headlight Beam Nylon Adjuster Nut

This green 1/4"-28 nylon nut mounts directly to the headlamp housing and enables the headlamp beam to aimed correctly. Designed for GM vehicles with fiberglass headlamp panels. Fits a variety of GM vehicles from 1976-on....


Product#: A5788

1/4-28 GM Headlamp Adjuster Nylon Nut

Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68...


Product#: 4919653

1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid

Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...


Product#: B1435

1958-63 Headlamp Adjuster Hardware Set ; 64 Piece Kit

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 64 Pieces - (8) adjusting screw, (8) plastic adjusting nut, (16) mounting screws with (16) washers and (16) nuts. 1 set is...


Product#: 14014

1958-1966 Chevy Impala, Pickup, GMC 1958-72; Headlamp Mounting Bucket and Trim Ring Set ; 2 Tab ; 8 Piece Set

OER®reproduction of the original 2-tab headlamp mounting buckets and headlamp mounting rings designed for use on various GM vehicles including 1958-61 Chevrolet trucks and 1958-72 GMC pickup truck models. Each headlamp...


Product#: 5966170

1976-88 GM; Headlamp Retaining Ring; Rectangular Style; Stainless Steel; 4" x 6" Lamp Design; Each

Reproduction of the original headlamp headlamp retaining ring designed for use with various 1976-1988 GM passenger car and trucks models. Each rectangular retaining ring is manuactured in quality stainless steel replicating...


Product#: *R493

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...


Product#: *R492

Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;

Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can...


Product#: 153930

1958-82 Chevy, Pontiac; Headlamp Mounting Set ; Various Quad Headlamp Models ; 3 Tab

Reproduction of the original headlamp mounting set designed for use on various Chevrolet and GMC truck models. This set includes four 3-tab stainless headlamp retaining rings, four EDP coated "square-hole" style headlamp...