Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"
Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...
1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut
Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
1958-63 Chevy, GMC Truck, 1958-61 Impala, Full Size; Headlamp Adjuster Screw & Nut Set; 8 Piece Set
Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 8 Pieces - (1) adjusting screw, (1) plastic adjusting nut, (2) mounting screws with (2) washers and (2) nuts. 4 sets are...
1964 Impala, Biscayne, Bel Air; Headlight Bezel ; Each
Reproduction headlamp bezel for 1964 Chevrolet Impala and Full Size models. Each bezel is manufactured in quality aluminum replicating the original in quality and design. Can be installed on the RH or LH sides. Sold...
1964 Impala, Bel Air, iscayne; Headlamp Bezel Lower Clip; Each
Reproduction of the original front headlamp bezel lower mounting clip designed for use on 1964 GM Impala and full size models. Clips are manufactured with injection molded tooling replicating the original in quality and...
Headlamp Sealed Beam; 12 Volt; High Beam; 5-3/4" Round; Halogen
Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting.
1962 Impala, Biscayne, Bel Air; Headlamp Bezel Set; Pair
Reproduction headlamp bezel set for 1962 Chevrolet Impala, Bel Air and Biscayne models. Each bezel is manufactured in stamped aluminum that replicates the original in quality, design and fitment. Will install as original...
1963 Impala, Biscayne, Bel Air; Headlight Bezel Set; 4-Piece Set
Reproduction front headlight bezel set for 1963 Impala and Full Size models. Each bezel set is manufactured in stamped aluminum featuring a bright polished finish offering an original fit and appearance. Sold in set of 4...
1968 Impala, Caprice; Headlamp Bezel; Chrome; LH Driver Side
Reproduction front headlamp bezel for 1968 Chevrolet Impala, Caprice, Bel Air, and Biscayne models. Manufactured in quality die-cast zinc featuring a bright chrome plated finish to replicate the original in quality,...
1967 Impala, Bel Air, Biscayne, Caprice; Headlamp Bezels; Pair; OER
Reproduction headlamp bezel set for 1967 Chevrolet Impala, Bel Air, Biscayne and Caprice models. Each headlight bezel set is manufactured in quality stamped aluminum to replicate the original in fit and appearance. Features...
1966 Impala, Bel Air, Biscayne, Caprice; Headlamp Bezels; RH & LH; Pair
Reproduction headlamp bezel set for 1966 Caprice, Impala, Bel Air, and Biscaynemodels. Each bezel set is manufactured from stamped aluminum and replicates the original in quality and fit. Features correctly painted accents...
1958-82 Chevy, GMC, Pontiac; Headlamp Mounting Bucket; Inner; with Square Hole; Various Models
Reproduction of the original "square-hole" style mounting bucket designed for use on various 1958-82 GM models. The mounting bucket is designed to allow adjustment of the headlight beam on various 5-3/4" round quad headlamp...
1955-63 Chevrolet Full Size Passenger; Headlamp Retaining Ring Spring; 2nd Design
Reproduction of the original spring used on the headlamp retaining ring spring for various 1955-63 Chevrolet models including Tri-5, Impala and Corvette models. Replaces OEpart numbers # 5946543, 5948814 2nd design. {fitment}
1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each
Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...
Headlamp Sealed Beam; 12 Volt; High Beam; 4" x 6" (100mm x 165mm); Rectangular; Halogen
Replacement 4" x 6" (100mm x 165mm) rectangular sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting....
Headlamp Sealed Beam; 12 Volt; Low Beam; 5-3/4" Round; Tungsten
This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out. {fitment}
H4 Xenon 130/90 Watt High Performance Headlamp Bulbs - Pair
Upgrade your lighting to Hyper White Xenon Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 130/90 watt replacement bulbs light up the night to increase driving...
H4 Xenon 100/80 Watt Replacement Headlamp Bulbs - Pair
Upgrade your lighting to Hyper White Xenon Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 100/80 watt replacement bulbs light up the night to increase driving...
Headlight Bulb Set; 9004 Platinum Series Xenon-Enhanced Halogen Bulbs
Upgrade your lighting to Ultra Bright Xenon Gas Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These Platinum 9004 Xenon-Enhanced Solar Series bulbs provide brighter, whiter light...
Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4
Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.
9006 Ultra White 80 Watt Xenon High Performance Headlamp Bulbs - Pair
Upgrade your lighting to Ultra White Xenon Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These bright 80 watt replacement bulbs light up the night to increase driving safety and...
1962-68 Impala and Fullsize; 1/4-28 x 1" GM Headlamp Adjuster Screw With Nylon Nut; 16 Piece Set
Correct reproduction of the headlamp beam adjusting hardware set for various 1962-up GM models. Includes (8) nylon nuts, (8) 1/4"-28 x 1" adjuster screws. Each 16-piece set includes enough adjusters for both the right and...
1/4"-28 GM Headlight Beam Nylon Adjuster Nut
This 1/4"-28 headlight beam adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly. Fits a wide variety of GM vehicles from 1962-on. Use as required. Sold individually....
9005 Ultra White 65 Watt Halogen Headlamp Bulbs - Pair
Upgrade your lighting to Ultra White Halogen Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These bright 65 watt replacement bulbs light up the night to increase driving safety and...
1965-75 Impala / Full Size Headlamp Adjuster Screw And Nut Set
Reproduction of the headlamp adjusting hardware required for 1965-75 Impala, Biscayne, Bel Air and Caprice, as well as a variety of additional GM applications. This adjustor set contains the hardware required for proper...
9004 Ultra Bright Halogen 100/80 Watt Headlamp Bulb - Each
Upgrade your lighting to Ultra Bright Halogen Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 100/80 watt replacement bulbs light up the night to increase driving...
1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"
Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
1/4"-28 GM Headlamp Adjuster Nylon Nut
This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...
1968 Impala, Caprice, Bel Air, Biscayne; Headlamp Bezel Set; Chrome Die-Cast; Pair
OER® reproduction of the original front headlamp bezels designed for use with 1968 Chevrolet Impala, Caprice, Bel Air, and Biscayne models. This authentic reproduction is manufactured in quality die-cast zinc to exact...
1965 Impala, Bel Air, Biscayne; Headlight Bezel Set; 4 Piece Set; OER
Reproduction of the original headlight bezels designed for use with 1965 Chevrolet Bel Air, Biscayne, and Impala models. Each bezel is manufactured in stamped aluminum including a bright polished finish offering an original...
1961 Impala, Bel Air, Biscayne; Headlamp Bezels; RH and LH; Pair; OER; GM Licensed
Reproduction of the original headlamp bezels designed for use on all 1961 Impala and Chevrolet full size models including Bel Air, Biscayne, Brookwood, Kingswood, Parkwood and Nomad models. Manufactured to factory...
1968 Impala, Caprice, Bel Air, Biscayne; Headlamp Bezel; Chrome Die-Cast; RH Passenger Side
Reproduction front headlamp bezel for 1968 Chevrolet Impala, Caprice, Bel Air, and Biscayne models. Manufactured in quality die-cast zinc featuring a bright chrome plated finish to replicate the original in quality,...
Headlamp Sealed Beam; 12 Volt; Low Beam; 5-3/4" Round; Halogen
Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting. {fitment}
1958-82 GM; Headlamp Inner Mounting Bucket; with Square Hole; Various Models
Reproduction of the original "square-hole" style mounting bucket designed for use on various 1958-82 GM models. This headlamp mounting bucket is designed to allow adjustment of the headlight beam and attaches to the headlamp...
1973-81 GM Truck, Blazer, Camaro, Firebird, Nova; Headlamp Mounting Bucket; RH or LH; Each
Reproduction headlamp mounting bucket for various 1973-81 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Manufactured to correct factory specifications from quality stamped steel replicating the original design...
1/4-28 GM Headlamp Adjuster Nylon Nut
Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68 Full...
1976-1995 GM; Headlight Beam Adjuster Nut; 1/4"-28
This green 1/4"-28 nylon nut mounts directly to the headlamp housing and enables the headlamp beam to aimed correctly. Designed for GM vehicles with fiberglass headlamp panels. Fits a variety of GM vehicles from 1976-on....
1964 Impala, Bel Air, Biscayne; Headlamp Bezel Set; Set of 4
Reproduction headlamp bezel set for 1964 Chevrolet Impala and Full Size models. Each bezel set is manufactured in quality aluminum replicating the original in quality and design. Each set includes 4 bezels for the RH and LH...
1968-69 Camaro, Caprice; Headlamp Reservoir Check Valve Assembly; OER
Reproduction check valve unit for 1968-69 Camaros and Caprice models with (hidden headlamp) option. This check valve is necessary for the correct operation of the Rally Sport headlamp system. The check valve is located on the...
1958-76 GM; Outer Headlamp Mounting Bucket; with Square Hole; Various Models
Reproduction of the original square-hole style headlamp mounting bucket, engineered for use with various 1958-82 GM vehicles equipped with 5-3/4" round quad headlamps. This bucket allows precise beam alignment and securely...
Headlamp Sealed Beam; 12 Volt; High Beam; 5-3/4" Round; Tungsten
This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out. {fitment}
Headlamp Sealed Beam; 12 Volt; Low Beam; 4" x 6" (100mm x 165mm); Rectangular; Halogen
Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting. {fitment}
H4 Xenon 60-55 Watt Hyper White High Performance Headlamp Bulbs - Pair
Upgrade your lighting to Hyper White Xenon Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 60/55 watt replacement bulbs light up the night to increase driving...
H4 Halogen 60-55 Watt Replacement Headlamp Bulbs - Pair
Upgrade your lighting to Ultra Bright Halogen Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 60/55 watt replacement bulbs light up the night to increase driving...
H4 Ultra Bright 100/80 Watt Halogen Hight Performance Headlamp Bulbs - Pair
Upgrade your lighting to Ultra Bright Halogen Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 100/80 watt replacement bulbs light up the night to increase driving...
1968-82 Camaro, Impala, Corvette; Vacuum Headlight Hose Line Filter; with Concealed Headlights
Reproduction of the original filter assembly manufactured in injection molded ABS to factory specifications. This filter is necessary for the correct operation of 1968-69 GM models with the concealed headlamp system. The hose...
9005 Ultra White 100 Watt Halogen Headlamp Bulb Set - Pair
Upgrade your lighting to Ultra Bright Halogen Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 100 watt replacement bulbs light up the night to increase driving...
9006 Ultra White 55 Watt High Performance Halogen Headlamp Bulbs - Pair
Upgrade your lighting to Ultra White Halogen Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These bright 55 watt replacement bulbs light up the night to increase driving safety and...
9007 Halogen Low/High Beam High Performance 65/55 Watt Headlamp Bulb - Capsule Style - Each
Upgrade your lighting to Ultra Bright Halogen Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These bright, high performance 65/55 watt replacement bulbs light up the night to...
1958-76 GM; Headlamp Retaining Ring ; 5.75" Round; Stainless Steel; Various Models
Correct OER® reproduction of the original headlight retaining ring designed for use on various GM models. The headlamp ring is manufactured in stainless steel offering authenticity and an original appearance. Features 3...
Headlamp Pigtail Socket; 3 Prong; Each; Various Models
Replace missing, cracked or brittle plastic headlamp socket pigtail assembly with this quality reproduction. This replacement, heavy duty 3-wire headlamp plug will replace the original plug on most vehicles equipped with dual...
1969 Impala, Bel Air, Biscayne, Caprice; Headlamp Bezel; LH Drivers Side
Reproduction of the original front headlamp bezel designed for use on 1969 Impala and full size Chevrolet car models. Each headlight bezel is manufactured as original for a perfect fit and appearance. Includes the headlamp...
1969 Impala, Bel Air, Biscayne, Caprice; Headlamp Bezel; Passenger Side
Reproduction of the original front headlamp bezel designed for use on 1969 Impala and full size Chevrolet car models. Each headlight bezel is manufactured as original for a perfect fit and appearance. Includes the headlamp...
1965 Impala, Bel Air, Biscayne; Headlamp Bezel Lower Clip; Each
This is a reproduction headlamp bezel lower clip for 1965 GM Impala, Bel Air, and Biscayne models. These lower clips are manufactured from injection molded tooling replicating the original in quality, design and fitment. This...
1961-84 Buick, Cadillac, Chevy, Olds, Pontiac; Floor Mount Headlamp Dimmer Switch; 12 Volt
The headlight dimmer switch is located on the drivers front floor and is used to switch the headlights from low beam to high beam. This OER® Authorized reproduction switch is correct for all models which include a floor...
1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid
Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...
Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 64 Pieces - (8) adjusting screw, (8) plastic adjusting nut, (16) mounting screws with (16) washers and (16) nuts. 1 set is...
1966 Impala, Bel Air, Caprice; Headlight Eyebrow Extension Moldings; Pair
Reproduction of the original front eyebrow extension moldings designed for use on 1966 Impala and Full Size models. Manufactured in quality stamped aluminum replicating the original moldings in fit and appearance. Installs on...