1965 Chevrolet Impala; Rear Trunk Lid Panel; 2-Door Hardtop; EDP Coated
Reproduction trunk lid for 1965 Chevrolet Impala 2-door hardtop models. Each trunk lid is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....
1962 Chevrolet Impala, Bel Air; Full Rear Quarter Panel; 2 Door Hardtop; LH Driver Side
Reproduction full-style quarter panel for 1962 Chevrolet Impala 2-door hardtop models. Each panel is precision-stamped in steel to factory specifications, featuring the correct body contours for an authentic appearance and...
1962 Chevrolet Impala, Bel Air; Full Rear Quarter Panel; 2 Door Hardtop; RH Passenger Side
Reproduction full-style quarter panel for 1962 Chevrolet Impala 2-door hardtop models. Each panel is precision-stamped in steel to factory specifications, featuring the correct body contours for an authentic appearance and...
1958-82 GM; Power Steering Control Valve; "Brand New", Not Rebuilt!
Reproduction power steering control valve for 1958-64 Chevrolet Impala, Bel Air, Biscayne, 1960-68 Chevrolet, GMC truck, 1963-82 Corvette and 1962-67 Chevy II, Nova models equipped with original power assist power steering....
This Saginaw 525 style manual steering gear box utilize the latest in steering technology, featuring a highly efficient ball bearing screw that greatly reduces steering effort. This gear is made with new tooling for the...
Upholstery Installation and Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4
Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad the seat frame before installing new upholstery. NOTE: Hog rings are required when installing new upholstery. Available separately. Refer...
1961-62 Chevrolet Impala, Bel Air, Biscayne; Rear Dummy Antenna Assembly; LH Drivers Side
Reproduction antenna assembly designed for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to angle the...
Universal 9" Windshield Mount Rear View Mirror; Polished Ball Milled Billet Aluminum
Add a custom look to the interior with this fully polished and machined billet aluminum inner mirror. Since you spend most of your time inside your vehicle, why not get rid of your cheap looking original mirror and replace it...
This is an all new steering gear box manufactured to correct factory specifications utilizing brand new tooling for an authentic replacement. Replaces gear box used in 1958-64 Chevrolet Impala and full size models with manual...
Reproduction 15" x 7" Rally Wheel for various Chevrolet models with 5 x 4-3/4" lug pattern. This wheel is manufactured in steel replicating the original in design and appearance. Replace a rusty, pitted or missing Rally wheel...
Delco Energizer R59 Battery Topper Top Post
Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring the correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat...
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
Universal 8" Dual Diaphragm Power Brake Booster - Black
Universal 8" dual diaphragm brake booster. Booster will work on a variety of GM, Ford, trucks, and passenger vehicles. Perfect choice when space is at a premium. Will require adjustable pedal rod, correct clevis for your...
Police Style Steel Wheel; 15" x 7"; Dual Lug Pattern; Argent Silver; Includes Center Cap
Provide a classic look to your vehicle with this Police Style steel wheel. Each wheel comes beautifully powder coated in argent silver color. Wheel features a dual bolt pattern to fit a multitude of vehicles with 5 x 4-3/4"...
1967-68 Chevrolet, Buick; Walnut Woodgrain Steering Wheel ; 16" Diameter 4-1/4" Deep; N34 Option
Reproduction Walnut woodgrain steering wheel originally offered with the optional N34 package on select 1967-68 GM models. Known by the factory as the Woodgrain Plastic Rim Sport Style Steering Wheel, this reproduction...
1969-70 Camaro, Impala, Nova, Chevelle; Rosewood Steering Wheel; 16" Diameter; N34 Option
Reproduction of the original Rosewood steering wheel which was available as part of the optional N34 package on 1969 Chevrolet models.This steering wheel was originally referred to by the factory as Woodgrain Plastic Rim...
Electric Vacuum Pump Set For Power Brakes - Universal Fit
It takes 16" of Hg vacuum to properly activate your vehicle's power brake booster. Sometimes, big-cammed or supercharged engines don't create enough vacuum to operate the booster, making it more difficult to stop. This vacuum...
1961-64 Buick, Chevrolet, Oldsmobile; 3-Piece Bucket Seat Trim; Right Side
Reproduction of the original passenger side chrome seat trim for 1962-64 Impala and various other 1961-64 Buick and Oldsmobile models with bucket seats. Each molding is stamped from heavy-gauge steel and chrome plated to...
Sanden 508 Style A/C Compressor w/ 6-Rib Serpentine Clutch Pulley; Natural Finish; SD508/SD5H14
New, not rebuilt, Sanden SD508 / SD5H14 style air conditioning compressor. The Sanden/Sankyo 508 is the one of the most popular aftermarket compressors on the market. SD508s rob less horsepower resulting in improved fuel...
1961-62 Chevrolet Impala, Bel Air, Biscayne; Rear Antenna Assembly; RH Passenger Side
Reproduction of the original rear antenna assembly for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to...
OER® Black and Aqua Trunk Spatter Paint Quart
OER® Black and Aqua trunk spatter paint for the descriminating restorer who wants to get an exact color match or to completely restore your trunk to its former glory. This item is produced by the original manufacturer....
Replace a rusty, pitted or missing Rally wheel with this outstanding new reproduction. Each wheel comes beautifully powder coated in correct original silver color. Center caps, trim rings and lug nuts are not included and...
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
Police Style Steel Wheel 15" x 8"; Dual Lug Pattern; Argent Silver; Includes Center Cap
Provide a classic look to your vehicle with this Police Style steel wheel. Each wheel comes beautifully painted argent silver. Wheel features a dual bolt pattern to fit a multitude of vehicles with 5 x 4-3/4" or 5 x 4-1/2"...
1967-89 GM; Universal Tachometer Filter
Eliminate tach signal noise and surges caused by your ignition system with this compact and easy-to-install tachometer filter. This filter installs between the tachometer and the signal source and modifies the signal for...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1965-86 GM; Interior Door Panel Clip; White Nylon; Each
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1970-75 GM; Windshield Molding Clip; Each
Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"
Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...
1960-73 GM; Sun Visor Tip and Bushing Set; 4 Piece Set; Various Models
Tired of sunvisors that won't stay put because the nylon tip is gone? Reproduction of the sunvisor tips and bushings designed for use on various GM models. The sunvisor bushings are manufactured to correct OE specifications...
1968-77 GM; Window Crank Handle; Riveted Design; with Black Knob; Various Car & Truck Models
OER® reproduction window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile car and truck models. Manufactured in die-cast zinc featuring a chrome finish and a black knob that replicates the...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...
1947-1982 Ford, GM, Chrysler; Glove Box Insert Clip; Each
OER® reproduction of the original style stamped metal clip that attaches to the glove box liner in various classic GM passenger cars and trucks. These clips allow the liner to be aligned and attached in place with mounting...
Reproduction of the original chrome side marker lamp bezel designed for use with various 1968-69 Chevrolet models as listed below. Manufactured in die-cast zinc and chrome plated to match the original in quality and design....
OER Tri-Stic Retractable Pen with Black Ink
Ever wonder where all your pens go? Why not stock up on this eye catching inexpensive OER® black and yellow retractable pen.
Highly visible, quality lanyards are just what you need for any trade show event or car show. Features the bright OER® logo printed on both sides of 3/4" wide sublimation polyester. Includes an attached O-ring that will...
1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut
Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
1968-77; GM Cars and Trucks; Window Crank Handle With Clear Knob; Riveted Design
OER® reproduction of the original window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. Manufactured in die-cast zinc featuring a chrome finish and a clear knob that replicates the...
This soft key tag is made of a sturdy material that is thick yet pliable, and comes with a spiral key ring.
Reproduction of the original outer door mirror designed for use with various 1967-72 Chevrolet models. Each mirror is manufactured from durable die-cast zinc and finished to match factory specifications for a precise fit and...
1977-91 Buck, Chevy, Pontiac, Olds; Dome Lamp Base Reflector; Round; Various Models
OER® reproduction of the original round dome light base reflector for various 1977-1987 GM models. Each dome reflector is manufactured in injection molded ABS, with bright chrome trim, replicating the original reflector...
1955-80 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
Reproduction of the original outer door mirror designed for use with various 1968-72 GM models. Each mirror is precision-manufactured in high-quality die-cast zinc, replicating the original design, fit, and finish for an...
Reproduction floor pan assembly for 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. This complete floor pan is manufactured in quality stamped steel to factory dimensions and replicates the original floor pan...
1964-73 GM; Sun Visor Support Bracket; Coupe; with Hardware; Die-Cast; Each
High quality reproduction of the original interior sun visor support bracket designed for use with various 1964-73 Buick, Chevrolet, GMC, Pontiac and Oldsmobile models. Each sun visor bracket is manufactured in quaility...
1966-73 GM; Inner Rear View Mirror; 8"; Polished Stainless; Various GM Models
OER® reproduction inner rear view mirror for various GM models. This reproduction mirror is manufactured to factory specifications and replicates the original in fit and appearance. This 8" mirror features a bright...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....
1965 Impala, Bel Air, Biscayne; Complete Trunk Floor Pan; EDP Coated
Reproduction of the original trunk floor panel designed for use with 1965 Chevrolet Impala, Bel Air, and Biscayne 2-door, 4-door, hardtop, convertible and sedan models. Each trunk floor pan is manufactured in stamped steel to...
This is an excellent reproduction of the original horn button cap originally installed on various 1967-70 Chevrolet car models equipped with the optional woodgrain, or Comfort Grip steering wheel. Each cap is manufactured in...
1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long
Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
1965-70 Impala, Bel Air, Biscayne, Caprice; Full Floor Pan Assembly; with Bracing; EDP Coating
Reproduction complete floor pan for 1965-1970 Chevrolet Impala, Bel Air, Biscayne and Caprice models. This complete floor pan is manufactured in stamped steel to OE factory specifications replicating the design and fitment...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
1967-72 Buick, Chevy, Pontiac, Olds; Front Seat Belt Anchor Bolt; ; 1/2-13 Coarse Thread
When it comes to seat belt bolts, OE-quality hardware manufactured to DOT standards is essential. This exact reproduction seat belt bolt is designed to replace the original front seat belt bolt precisely, making it the...