1970-74 Various GM Vehicles; Gear Kit; Muncie M22; Close Ratio 2.20; 26 Spline; 26 Tooth
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
1970-74 Various GM Vehicles; Rebuild Kit; Muncie 4 Speed; M20, M212, M22
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick Skylark,...
1966-70 Various GM Vehicles; Rebuild Kit; Muncie 4 Speed; M20, M21, M22
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick Skylark, and...
Reproduction of the original style shifter arm for use with various 1965-67 Chevrolet models as listed below. This unique shifter arm is an excellent replacement for a damaged original shifter mechanism. Replaces the Muncie...
1964-67 Chevrolet Chevelle, El Camino, Clutch Bell Crank; Cross Shaft, Z-Bar; Big Block Engines
What the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel. Fits 64-67 Chevelle & El Camino Big Block engines. {specs}
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction of the original style heavy weight chrome shift knob designed for use on high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
Highly polished triple chrome plated reproduction of the original chrome shift knob designed specifically for 1964-67 Chevelle, El Camino, Impala, Bel Air, Biscayne, Caprice, Chevy II Nova, and Malibu models with 1-3/4" dia....
1968-72 Various GM Vehicles; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...
Reproduction of the original style shifter arm for use with various 1965-66 Chevrolet Impala. Bel Air, Caprice, and 1967 Chevelle, Malibu, and El Camino models. This unique shifter arm is an excellent replacement for a...
1964-67 Chevrolet Chevelle, El Camino, Clutch Bell Crank; Cross Shaft, Z-Bar; Small Block Engines
What the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel. Fits 64-67 Chevelle & El Camino with Small Block engines. {specs}...
1958-83 GM; Block Side Pivot Ball; Screw-In Type; Reproduction
This is an exact OER® reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each pivot ball is manufactured from hardened steel replicating the original in...
1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1970-74 Various GM Vehicles; Gear Kit; Muncie M22; Wide Ratio 2.52; 26 Spline; 21 Tooth
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
1975-81 Camaro, Nova, Corvette, Firebird; Clutch Flywheel Housing Cover; Manual Trans; T10; OER
Reproduction of the original clutch flywheel housing cover designed for use on various 1975-81 GM vehicles with Borg Warner T-10 manul transmissions. This cover is used to protect the clutch flywheel housing for vehicles with...