1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Passenger Side
Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...
1973-91 Chevrolet, GMC 3/4, 1 Ton 2WD Truck; Lower Control Arm; LH Driver Side
Reproduction of the original lower control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1973-91 Chevrolet/GMC C20/C30 Truck; Upper Control Arm; 3/4, 1 ton; 2 WD; LH Driver Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1971-96 Chevrolet, GMC Truck; Lower Ball Joint; 2 Wheel Drive
Reproduction of the original lower ball joint designed for use on various 1971-96 Chevrolet and GMC truck models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about...
1963-72 Chevy, GMC Pickup; C10; C20; C30; Bracket Set; Front Sway Bar to Frame; Stock Height
These 1963-72 front sway bar to frame brackets are designed for a factory/stock height pickup. For trucks with air bag suspension we also recommend using stock height brackets. Sold as a pair to fit LH and RH side of the...
This lowered front sway bar bracket set will provide more ground clearance and is recommended for trucks lowered 3" or more. The brackets pull the bar up towards the frame to achieve additional ground clearance. For trucks...
1971-99 Chevrolet/GMC; 2 WD Truck; Upper Ball Joint; with 5/8" Threads
Reproduction upper ball joint for various 1971-99 Chevrolet and GMC 2-wheel drive truck models. This ball joint installs into the upper control arm with bolts, washers and nuts that are included. Also included are the main...
This lowered front sway bar bracket will provide more ground clearance and is recommended for trucks lowered 3" or more. The bracket pulls the bar up towards the frame to achieve additional ground clearance. For trucks with...
1963-72 Chevy, GMC Pickup; C10; C20; C30; Bracket; Front Sway Bar to Frame; Stock Height
This 1963-72 front sway bar to frame bracket is designed for a factory/stock height pickup. For trucks with air bag suspension we also recommend using stock height brackets. Sold individually, fits LH or RH side of the...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1973-91 Chevrolet/GMC C20/C30 Truck; Lower Control Arm; 3/4, 1 ton; 2 WD; RH Passenger Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
1973-91 Chevrolet/GMC C20/C30 Truck; Upper Control Arm; 3/4, 1 ton; 2 WD; RH Passenger Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...
1973-91 Chevrolet, GMC Truck; Upper Control Arm Shaft Kit; 2 Wheel Drive
Reproduction of the original control arm shaft kit, precision-engineered, and rigorously tested to provide a reliable replacement for the original equipment shaft. Direct replacement fits and functions exactly like the...
1973-91 Buick, Chevy, GMC, Olds, Pontiac; Sway Bar Bracket; Each; Various Models
OER® reproduction of the original style "U" shaped sway bar bushing clamp designed for use with the various GM models listed below. This bracket is manufactured from stamped steel and used to hold the inner sway bar...