Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1995-2000 Chevy, GMC, Escalade; Lower Ball Joint; with Welded Control Arm; 2/4 WD
Reproduction of the original style lower ball joint designed for use with 1995-2000 Chevrolet, GMC, and 1999-2000 Escalade models. This ball joint is for vehicles with welded style lower control arm (not for forged 1-piece...
1970-05 Buick, Chevrolet, Oldsmobile, Pontiac; Frontsway Bar End Link
Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle.
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
3 inch lift style bare steering knuckle set for 1999-2006 Silverado, Sierra 1500 series and 2007 Classic Silverado or Classic Sierra 2WD and other GM models as listed. This kit includes a pair of bare knuckles to provide a 3...
Replacement bare steering knuckle set for 1999-2006 Silverado, Sierra 1500 series and 2007 Classic Silverado or Classic Sierra and other GM models as listed. This kit includes a pair of bare knuckles for vehicles weighing...
2" drop style bare steering knuckle set for 1999-2006 Silverado, Sierra 1500 series and 2007 Classic Silverado or Classic Sierra 2WD and other GM models as listed. This kit includes a pair of bare knuckles to provide a 2 inch...
1955-2005 GM; Sway Bar End Link; Original Style; with Hardware; Rubber
OER® reproduction of the original sway bar end link designed for use with various 1955-2005 GM car and truck models. Replace the sway bar end links and eliminate issues associated with worn out links. Each sway bar link...
1988-02 Chevrolet/GMC Truck; Lower Control Arm; 2WD; 1/2, 3/4, 1 Ton; LH
Reproduction of the original upper control arm for 1988-2002 Chevrolet and GMC truck models with 1/2 ton, 3/4 ton or 1 ton suspension, and 2000 Cadillac Escalade models. This control arm is manufactured in stamped steel to...
1988-02 Chevrolet/GMC Truck; Lower Control Arm; 2WD; 1/2, 3/4, 1 Ton; RH
Reproduction of the original upper control arm for 1988-2002 Chevrolet and GMC truck models with 1/2 ton, 3/4 ton or 1 ton suspension, and 2000 Cadillac Escalade models. This control arm is manufactured in stamped steel to...
Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...
1988-05 Chevrolet/GMC/Cadillac; Ball Joint; 2WD / 4WD; Upper
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1988-00 Chevrolet/GMC/Cadillac; 2WD; Lower Ball Joint
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...