1977-96 GM; Lower Control Arm; RH
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1977-96 GM; Lower Control Arm; LH Drivers Side
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1980-90 Impala, Caprice; Front Disc Brake Spindle Set; Reconditioned; Pair
Each reconditioned spindle set includes a LH and RH spindle that features a new outer bearing/race (#S34) which allows the spindle to be used with the 1973-77 GM 11" diameter rotor that came on mid-size GM vehicles with the 5...
Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1971-05 GM; Lower Control Arm Bushing; Passenger Car and Truck
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning...
1970-05 Buick, Chevrolet, Oldsmobile, Pontiac; Frontsway Bar End Link
Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle.
1980-96; Chevrolet Impala; Front End Rebuild Kit
1980-96 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1955-2005 GM; Sway Bar End Link; Original Style; with Hardware; Rubber
OER® reproduction of the original sway bar end link designed for use with various 1955-2005 GM car and truck models. Replace the sway bar end links and eliminate issues associated with worn out links. Each sway bar link...
Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1977-96 GM; Upper Control Arm; With Shaft; LH
Replacement upper control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement upper control arm includes pre-installed bushings and ball...
1977-96 GM; Upper Control Arm; With Shaft; RH
Replacement upper control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement upper control arm includes pre-installed bushings and ball...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1971-96 GM; Upper Control Arm Bushing; Various Models; Pair
Reproduction style upper control arm bushing designed for various 1971-96 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...
1970-96 GM Lower Control Arm Bumper, Each, Various Models
OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...