Product#: RSB502

1982-02 Camaro, Firebird; Rear Sway Bar; 7/8" Diameter

Replacement sway bar for 1982-2002 Camaro and Firebird models. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. These offer all of...


Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: 18203

1970-05 Buick, Chevrolet, Oldsmobile, Pontiac; Frontsway Bar End Link

Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle.


1958-13 Various GM Vehicles; Front Sway Bar/Stabilizer Bar; Bushing WS6; 7/8"
NEW

Product#: SU0078Z

1958-13 Various GM Vehicles; Front Sway Bar/Stabilizer Bar; Bushing WS6; 7/8"

New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...


Product#: SU2266Z

1960-88 Various GM Vehicles; Front Sway/Stabilizer Bar; Bushing 1-1/4"

New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Product#: 18060

1955-2005 GM; Sway Bar End Link; Original Style; with Hardware; Rubber

OER® reproduction of the original sway bar end link designed for use with various 1955-2005 GM car and truck models. Replace the sway bar end links and eliminate issues associated with worn out links. Each sway bar link...


Product#: W1006

Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...


Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember

Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...


Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
NEW

Product#: 154633

Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...


Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...


Product#: 10068783

1970-96 GM Lower Control Arm Bumper, Each, Various Models

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...


Product#: 406887

1973-91 Buick, Chevy, GMC, Olds, Pontiac; Sway Bar Bracket; Each; Various Models

OER® reproduction of the original style "U" shaped sway bar bushing clamp designed for use with the various GM models listed below. This bracket is manufactured from stamped steel and used to hold the inner sway bar...


Product#: 104113

1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...


1958-13 Various GM Vehicles; Front Sway Bar/Stabilizer Bar; Bushing WS6; 1"
NEW

Product#: SU0001Z

1958-13 Various GM Vehicles; Front Sway Bar/Stabilizer Bar; Bushing WS6; 1"

New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 1" diameter...


1958-13 Various GM Vehicles; Front Sway Bar/Stabilizer Bar; Bushing WS6; 1-1/8"
NEW

Product#: SU0118Z

1958-13 Various GM Vehicles; Front Sway Bar/Stabilizer Bar; Bushing WS6; 1-1/8"

New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 1-1/8" diameter...


Product#: FSB911

Front Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm, LH or RH

These universal front sway bar end link brackets are for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm. This is a universal bracket sold as a service part, it may...


Product#: 12355

1978-98 GM Cars & Trucks; Lower Control Arm Bushing; (Toward Front of Car)

Reproduction control arm bushing for the front position in the lower control arm on various Gm vehicles as listed. Rubber bushing is encased in steel sleeve as original. Sold individually. Specifications Material: Steel...


Product#: 12413

1982-92 Camaro/Firebird; Control Arm Bushing; Lower; Rear

Reproduction control arm bushing for the rear position in the lower control arm of you 1982-92 Camaro or Firebird. Rubber bushing is encased in steel sleeve as original. Sold individually.