Product#: TR29164G

1980-86 Ford F-100, F150, F-250, F350, Bronco; Rear Wheel Opening Molding; Passenger Side

Reproduction of the original rear wheel opening molding designed for use with 1980-86 Ford F100, F150, F250, F350 pickup trucks, and Bronco models. Each wheel well molding is manufactured in stamped aluminum to factory...


Product#: TR29164H

1980-86 Ford F-100, F150, F-250, F350, Bronco; Rear Wheel Opening Molding; LH Drivers Side

Reproduction of the original rear wheel opening molding designed for use with 1980-86 Ford F100, F150, F250, F350 pickup trucks, and Bronco models. Each wheel well molding is manufactured in stamped aluminum to factory...


Product#: 24171

# 8-18 X 3/8 Phillips Head Sealing Screw; # 9 Head; For Wheel Opening Moldings and Window Reveal Molding Clip; With Bi-Wax Tip

Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...


Product#: TR16038E

1980-86 Ford F-100, F-250, F-350, Bronco; Front Wheel Opening Molding; RH Passenger Side

Reproduction of the original front wheel opening molding designed for use with 1980-86 Ford F100, F250, F350 trucks, and Bronco models. Each wheel molding is manufactured in clear anodized aluminum replicating the original in...


Product#: TR16038F

1980-86 Ford F-100, F-250, F-350, Bronco; Front Wheel Opening Molding; LH Drivers Side

Reproduction of the original front wheel opening molding designed for use with 1980-86 Ford F100, F250, F350 trucks, and Bronco models. Each wheel molding is manufactured in clear anodized aluminum replicating the original in...


Product#: A8448

1962-71 GM; Front & Rear Door Molding Fastener, Clip; 1" Long, White Nylon; Requires #8 Tapping Screw; Each

These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...


Product#: A9477

Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw

Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}


Product#: 11501047

1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated

OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...


Product#: 4492963

Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated

Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....


Product#: A9863

Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated

Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...


Product#: *A2754K

1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set

Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...


Product#: *B13145K

Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...


Product#: *A19807K

Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...


Product#: *A2789K

Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...


Product#: *3917954K

1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models

Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...


Product#: *A19626K

Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...


Product#: *A19378K

Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set

Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...


Product#: *A8386K

Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...


Product#: *A8843K

Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...