Product#: C926321

1967-81 Camaro, Impala, Nova; Clutch Fork; 6 or 8 Cyl.; Heavy Duty Replacement;

Reproduction of the original style clutch fork designed for use on various 1967-81 Camaro, Impala, Caprice, Bel Air, Biscayne, and Chevy II Nova models with manual transmissions as listed below. This quality reproduction of...


Product#: 406172

1971-83 Chevrolet Camaro/Impala/Caprice/Pontiac Firebird; Clutch Pedal Push Rod Bushing

This small bushing is essential to keep the clutch push rod in the proper location. This OER® injection molded plastic bushing installs on the clutch pedal and retains the clutch push rod. This is a commonly worn out...


Product#: 332521

1973-81 Camaro / Firebird Clutch Fork Return Spring

OER® reproduction of the original clutch pedal return spring designed for use on all 1973-81 Camaro and Firebird models. Each spring is manufacturer to correct factory dimensions and replaces the old or worn out original....


Product#: 3843943

1964-1981 Chevrolet; Clutch Housing / Flywheel Cover ; for 11" Bellhousing

Reproduction of the original style clutch housing and flywheel cover plate designed for use on a variety of 1964-81 Chevrolet models as listed. Manufactured in stamped steel to original specifications that replicate the...


Product#: 3849703

1964-81 Lower Clutch Push Rod ; 6 Cyl ; Small Block

OER® reproduction of the lower clutch push rod for various GM models. Includes right angle shell portion correctly swaged and internally threaded to match the lower clutch push rod adjuster for 6 cylinder and small block...


Product#: 354497

1958-79 Chevrolet; Flywheel Clutch Housing Cover; for 10-1/2" Bellhousing; Manual Trans; OER

Correct flywheel / clutch cover plate designed for use with the various 1958-79 Chevrolet models as listed. Each cover is manufactured in quality stamped steel for an authentic replacement. This cover is located on the back...


1965-83 Buick, Chevy, Pontiac, Olds; Clutch Fork Ball Stud; Each
NEW

Product#: 3729000

1965-83 Buick, Chevy, Pontiac, Olds; Clutch Fork Ball Stud; Each

Replacement clutch fork ball stud for various 1965-83 Buick, Chevrolet, Pontiac, and Oldsmobile models. This stud attaches inside the clutch bellhousing to provide a pivot point for the clutch fork. Measures 13/16" -16 x...


Product#: K981

1967-87 Buick, Chevrolet, Olds, Pontiac; Pedal Pad; Brake Or Clutch

Reproduction brake or clutch pedal pad for a variety of GM models equipped with manual transmissions and drum brakes. Manufactured in quality EPDM rubber replicating the original horizontal ribbed design. This pedal pad can...


Product#: K1448

Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set

Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...


Product#: K911

1967-81 GM; Various Models; Brake & Clutch Pad Trim Plate; Manual, Transmission

Correct reproduction brake and clutch pedal pad trim plate for various 1967-81 GM models with manual transmission. Each steel pedal trim plate is designed to replicate the original in fit, appearance and design. {specs} ...


Product#: 3993851

1962-83 GM Clutch Fork Boot; 3-1/2" x 2-5/8"

OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...


Product#: 340252

1975-81 Camaro, Nova, Corvette, Firebird; Clutch Flywheel Housing Cover; Manual Trans; T10; OER

Reproduction of the original clutch flywheel housing cover designed for use on various 1975-81 GM vehicles with Borg Warner T-10 manul transmissions. This cover is used to protect the clutch flywheel housing for vehicles with...


Product#: 3973089

1970-81 Camaro, Firebird, Nova, Ventura; Upper Clutch Push Rod Boot; Various Models

OER® reproduction upper clutch push rod boot for various 1970-81 Buick, Chevrolet, Oldsmobile and Pontiac models. Each clutch rod boot is manufactured in quality EPDM rubber matching the original boot cosmetically in...


Product#: *R5010

1972-81 GM Pedal Pad Kit - Manual Trans - 8 Piece set

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and 2-3/8" clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3"...


Product#: *R5009A

1972-81 GM Pedal Pad Kit; Manual Trans; 4 Piece Kit; Various Models

Reproduction of the original pedal pads designed for use on 1976-81 Camaro, Firebird and various other GM models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual...


Product#: 3973086

1970-81 Clutch Bellcrank Pivot Ball Bracket ; Frame Side ; Camaro. Firebird

OER® reproduction of the original frame side clutch bellcrank pivot ball bracket designed for use on 1970-81 Camaro and Firebird models with manual transmissions. This steel bracket attaches to the vehicles frame....


Product#: K712

1972-81 Camaro; Clutch Linkage Set; Small block & Big Block

Reproduction of the original clutch linkage components designed to replace the clutch linkage on 1972-81 Camaro small block or big block models. Each comprehensive clutch linkage set includes the necessary components to...


Product#: 3749084

1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel

OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...