1962-74 Dodge, Plymouth B / E-Body; Spindle Set; Stock Height; With Disc Brake Brackets
Disc Brake conversion spindle set with caliper brackets for 1962-74 Dodge or Plymouth B & E-Body. Designed in the style of a 1973 & up Mopar disc brake spindle, but developed to fit 1962-74 Mopar B/E Body model drum brake...
1962-74 Mopar B / E-Body; Shock Tower Brace; Passenger Side; EDP Coated
This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...
Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1957-89 Dodge, Plymouth A, B & E-Body; Upper Control Arm Ball Joint; OER
Reproduction of the original style upper control arm ball joint designed for use with 1962-74 Dodge and Plymouth B, and E-body models and select early and late A-body Models. These vital suspension components are commonly...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1962-74 Mopar B / E-Body; Shock Tower Brace; Drivers Side
This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; LH
Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...
1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; RH
Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...
1960-76 Dodge/Plymouth A / B / E-Body; Control Arm Bushing Set; Upper; 4-Piece; Premium Quality
Premium quality reproduction of the original upper control arm bushings designed for use with 1960-76 Dodge and Plymouth A, B, and E body models. Each bushing is manufactured to correct factory specifications replicatin the...
Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...
1966-74 Dodge/Plymouth; B/E-Body; Strut Rod Rubber Bushing Kit; Standard Design
Standard design strut rod bushing kit for 1966-74 Mopar B-body and C-body vehicles. These OE-style rubber bushings are factory replacement for models manufactured up to 10/19/73. They will meet or exceed the factory ride and...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
Emblem Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 8 speed nuts without...
Speed Nut Set ; 5/16" ; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 4 speed nuts without...