Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...


Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...


Product#: 3822

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 7/8" Diameter ; 3/8-16 x 1-1/2"; Zinc Plated

Reproduction bumper bolt for a variety of General Motors applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long life. Each bolt...


Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...


Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...


Product#: *MM1895

1971-74 Dodge/Plymouth; B-Body; Door Hinge Set; 4 Piece Set

The doors on 1971-74 Dodge and Plymouth B-Body models were extremely heavy and hard on original hinges. Each hinge is manufactured to correct factory specifications that replicate the original in fitment, quality and design. ...


Product#: MD2207

1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side

Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...


Product#: MP41021

1973-74 Mopar B-Body Remote Outer Door Mirror; LH ; Chrome (drivers side)

Reproduction of the original bullet-style drivers side door mirror designed for use on 1973-74 Mopar B-body models. Each mirror is a duplicate of the original in design and fitment. Includes a bright chrome polish that will...


Product#: MP41022

1973-74 Mopar B-Body Outer Door Mirror; RH ; Chrome (passenger side)

Reproduction of the original bullet-style drivers side door mirror designed for use on 1973-74 Mopar B-body models. Each mirror is a duplicate of the original in design and fitment. Includes a bright chrome polish that will...


Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10...


Product#: 2802710

1967-74 Dodge/Plymouth; A and B-Body; Exterior Door Mirror; Single Post; RH or LH

Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...


Product#: DQ4924T

1973-74 B-Body; 2-Door Coupe/2-Door Hardtop; Quarter Glass; Power; 3-Hole; RH; Tinted

Replace your pitted, scratched or broken original quarter glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...


Product#: DQ4925T

1973-74 B-Body; 2-Door Coupe/2-Door Hardtop; Quarter Glass; Power; 3-Hole; LH; Tinted

Replace your pitted, scratched or broken original quarter glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...


Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...


Product#: MB2297B

1973-74 Charger, Coronet, Road Runner, Satellite; Outer Door Handle Set; 2 Door; Coupe; Pair; Premier Reproduction; Made in the USA!

Reproduction of the original outer door handles designed for use with 1973-74 Dodge and Plymouth B-Body 2-door coupe models. These are truly the finest reproduction handles in the market featuring the correct castings,...


Product#: K51020

1962-76 GM, Dodge, Plymouth; Convertible Top Boot Storage Bag; Various Models

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...


Product#: 3454513

1971-74 Charger, Coronet, GTX, Road Runner, Satellite; Lower Front Door Hinge; LH; Drivers Side

Reproduction of the original lower door hinge designed for use with 1971-74 Dodge Charger, Coronet, and 1971 Plymouth GTX, 1971-74 Road Runner and Satellite models. The doors on 1971-74 Dodge and Plymouth B-Body models were...


Product#: 3454512

1971-74 Charger, Coronet, GTX, Road Runner, Satellite; Lower Front Door Hinge; RH; Passenger Side

Reproduction of the original lower door hinge designed for use with 1971-74 Dodge Charger, Coronet, and 1971 Plymouth GTX, 1971-74 Road Runner and Satellite models. The doors on 1971-74 Dodge and Plymouth B-Body models were...


Product#: 3454511

1971-74 Charger, Coronet, Road Runner, Satellite; Upper Front Door Hinge; LH; Driver Side

Reproduction of the original upper door hinge designed for use with 1971-74 Dodge and Plymouth B-Body models. The doors on 1971-74 Dodge and Plymouth B-Body models were extremely heavy and hard on the original hinges. The...


Product#: ME8152

1970-76 Dodge, Plymouth, A, B, E Body; Door Lock Striker Bolt; 2 Door; Each

Correct reproduction of the original door lock striker bolt designed for use on all 1970-76 Dodge and Plymouth A, B, and E body 2 door models as listed. The door lock striker bolt is manufactured to correct factory dimensions...