Reproduction of the original fuel tank designed for use with 1972-1973 Charger, Coronet, Road Runner, Regent, Satellite, Sebring, and Crestwood, models. This is a 19-gallon fuel tank with 4 front vent tubes on the tank. This...
1971-72 Charger, Coronet, GTX, Road Runner; Niterne Coated Fuel Tank; 4 Side Vent Tubes; 19 Gallon
Reproduction of the original fuel tank designed for use with 1971-72 Dodge and Plymouth Charger, Coronet, Road Runner, and Satellite models. This is a 19-gallon fuel tank with four vent pipes on the side of the tank. This...
1970-75 Dodge/Plymouth; Fuel Tank Filler Neck Grommet
Reproduction fuel tank to filler neck rubber grommet to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction grommet to eliminate vapor or fuel...
1971-73 Dodge, Plymouth B-Body; Standard Fuel Tank Sending Unit; with 3/8" Outlet, 1/4" Return Line
After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1971-73 Dodge, Plymouth B-Body; Fuel Sending Unit; 3/8" Outlet, 1/4" Return Line; Stainless Steel
Reproduction of the original fuel sending unit designed for use with 1971-73 Dodge and Plymouth B-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause...
1971-72 Dodge, Plymouth B-Body; Fuel Sending Unit; Single 5/16" Outlet; Stainless Steel
Reproduction of the original fuel sending unit designed for use with 1971-72 Dodge and Plymouth B-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1954-59 Chevy, GMC Truck; Fuel Tank Sending Unit; Universal Fit; without Pick-Up Tube; 0-90 Ohm
Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...
1962-76 Dodge, Plymouth; Fuel Sending Unit Ground Strap; 3-3/4" Steel
Reproduction of the original fuel tank sending unit ground strap designed for use with most 1962-76 Dodge and Plymouth A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your...
1962-76 Dodge, Plymouth A, B, E Body; Fuel Sending Unit Rubber Seal; 2-1/4" ID
Reproduction of the original rubber fuel sending unit seal designed for use with 1962-76 Dodge and Plymouth A, B, and E Body models. Replaces original Mopar part number # 1948757. We suggest replacing this seal every few...
1971-72 Mopar Accelerator Pedal Pad ; A,B,C,E-Body
Reproduction of the original accelerator pedal pad designed for use on various Chrysler, Dodge and Plymouth A, B, C, and E-body models. This injection molded ABS pedal pad is an accurate reproduction of the original pad...
1971-72 Mopar Accelerator Pedal Hardware ; A, B, C, E Body ; Various Models
Reproduction of the original accelerator pedal hardware designed for use on 1971-72 A/B/C/E-Body Mopar models. Components are designed to attach the accelerator pedal to the vehicle. This hardware set includes the pedal...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x .060"...
Correct reproduction of the original fuel tank designed for with 1972-73 Dodge Charger, Coronet, Plymouth Road Runner, and Satellite models. This reproduction fuel tank is manufactured in stamped steel featuring a Zinc...
Correct reproduction of the original fuel tank designed for with 1971-72 Dodge Charger, Coronet, Super Bee, R/T, Plymouth GTX, Road Runner, and Satellite models. This reproduction fuel tank is manufactured in stamped steel...