Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1966-1977 Ford Bronco License Plate Bracket, Stainless Steel
Reproduction stamped stainless steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate....
Bumper Bolt With Nut; Zinc Plated; With Stainless Steel Cap; 7/16-14 X 1-1/4"; 8 Bolt Set With Nuts
Reproduction of the original zinc-plated bumper bolt with a polished stainless steel capped head for a variety of Ford and Mercury applications including 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury Comet...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; RH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the RH (passenger side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; LH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the LH (driver side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to protect...
1971-72 Mustang 18 Piece Front Bumper Bolt Mounting Set
This kit has the necessary hardware to install a 1971 or 1972 Mustang front bumper. Attention to detail was taken to ensure that it fits and functions like the original. Set includes: 6 Chrome Bolts 6 U-nuts 6 Washers
1971-72 Mustang; Front License Plate Mounting Bracket; EDP Coated
Reproduction of the original front license plate bracket to mount a license plate to the front valance on 1971-72 Mustang. For use with a standard bumper, each bracket is produced in stamped steel and finished in EDP coating...
1971-72 Mustang (& 73 without Bumper Guards) Rear Bumper Mounting Set
This kit has all the necessary hardware to install a 1971, 1972 or 1973 Mustang rear bumper. (1973 is for use on Mustangs without bumper guards) Attention to detail was taken to ensure that it fits and functions like the...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will...
3/8"-16 X 1"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 3/8"-16 x 1" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
1948-72 Ford F100, F250, F350 Stepside Truck; Rear Bumper Bracket Set; with Hardware
Reproduction rear bumper brackets for 1948-72 Ford F100. F250, and F350 FlareSide (Stepside) pickup truck models. Each bracket is manufactured in stamped steel to correct factory dimensions for an authentic replacement. This...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
1964-70 Ford Mustang; 1966-77 Bronco; Bumper Bolt Mounting Kit; Front & Rear; 28 Pieces
Reproduction bumper bolt mounting kit for 1964-70 Mustangs. Each kit contains enough mounting hardware to mount both front and rear bumpers to the bumper brackets. This 28 piece set includes 8 large bumper bolts, 8 large...
1971-72 Ford Mustang; Front Fender to Bumper Filler Panels; with Brackets; Pair;
Reproduction front fender to bumper splash shield for 1971-72 Ford Mustang. These Front Fender to Bumper Fillers are designed from originals for a factory correct fit. Fits all cars with chrome front bumper. Molded PVC...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1966-1977 Ford Bronco; License Plate Bracket, Black
Reproduction stamped steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate. The...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...