1970 Chevrolet Camaro Parts - Weatherstrip

Reproduction of the original trunk weatherstrip designed for use on 1967-1981 Camaro and Firebird models. Each rubber weatherstrip measures 13-1/2 feet in length, and is manufactured with correctly configured extruded rubber....

Reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1970-81 Camaro and Firebird models. Manufactured in the correct configuration which allows easy installation when replacing...

Reproduction of the original roof rail weatherstrip designed for use on 1970-81 Camaro and Firebird coupe models. These quality weatherstrips are manufactured to the correct factory configuration and seal the area between the...

These rubber dipped spring steel clips are used to properly retain your roof rail weatherstrips to the roof rail strip. This part is manufactured from die formed steel and features a rubberized coating as original. Each clip is designed for use on 1970 -81 Camaro models. Installs at the front of the door window top outer corners. Sold in pairs. One pair required per car.

Reproduction of the original trunk weatherstrip gutters designed for use on 1970-81 Camaro and Firebird models. Manufactured in quality aluminum to OE specifications. This 2 piece trunk gutter is designed to hold the trunk...

Reproduction of the original style weatherstripping designed for use with 1970-81 Camaro models without the optional T-Tops. Keep your interior protected from the elements and reduce cabin noise by replacing your dried-out, cracked or just plain missing original weatherstrip with this reproduction weatherstrip kit. Each weatherstrip component is manufactured exactly to factory specifications and will fit and install exactly as original for both an authentic appearance and superior functionality. Weatherstrip Kit Includes: 2 - Door Frame Weatherstrip (LH & RH) 2 - Roof Rail Weatherstripping (RH and LH) 1 - Trunk Weatherstrip 4 - Door Window Felt Set with Black Bead (Inner & Outer, LH & RH) 2 - Hood Side Bumpers 2 - Hood Adjust Bumpers 2 - Outer Hood Adjust Bumpers 2 - Console Ash Tray Lid Stoppers 2 - Trunk Lid Bumpers 2 - Outer Door Rubber Stoppers {fitment} Important: This kit is designed for all Camaro models from 1970 through 1981 without t-tops. Note:This kit features window felts without the outer door stainless steel bead. This style felt is designed for cars with the optional Special Molding Package. The door moldings eliminate the need for the stainless steel bead, so a black felt without the bright bead was used by the factory on cars with Special Molding Package. Application Notes: The R5107 does not include the stainless steel bead on the outer window felts. If your Firebird does not have the rear hood molding and outer door reveal molding, use part number # R5106 weatherstrip kit. The R5106 features a stainless steel bead attached to the outer window glass run weatherstrip. This was used on most standard Camaro models.

Keep your interior protected from the elements and reduce cabin noise by replacing your dried-out, cracked or just plain missing original weatherstrip with this reproduction weatherstrip kit. Each weatherstrip component is manufactured exactly to factory specifications and will fit and install exactly as original for both an authentic appearance and superior functionality. Kit includes: Door Frame Weatherstrip (LH & RH) Roof Rail Weatherstrip Kit Trunk Weatherstrip 4 Piece Window Felt Weatherstrip (Inner & Outer, LH & RH) Rubber Stopper Kit Important: This kit is designed for all Camaro models from 1970 through 1981 without t-tops. Note: This kit features an OEM-style stainless steel bead on the window felts. This style bead is designed for use on cars without the Special Molding Package Application Notes: The R5106 includes the stainless steel bead attached to the outer window glass run weatherstrip. This was used on most standard Camaro models without the Special Molding Package. The R5107 does not include the stainless steel bead on the outer window felts. If your Camaro has the rear hood molding and outer door reveal molding, the R5107 is the kit you need.

Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...

Correct OER® reproduction of the original trunk lock bezel molded rubber gasket for use with all 1970-73 Camaro models. This molded gasket is used to seal the trunk lock bezel and help keep water and other elements from...

Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...

Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...

OER® reproduction of original evaporator case drain hose that attaches to the bottom portion of the evaporator core outlet case on various 1966-70 GM models originally equipped with air conditioning. Each drain hose is...

Replace the stoppers on your console with factory fresh rubber stoppers. These stoppers will eliminate the console lid or ash tray lid from slamming into the console. 2 each required per lid.

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...

Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...

Reproduction of the original license plate / fuel door stoppers used for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note:...

Reproduction of the outer front door window felts for 1970-81 Camaro and Firebird models. Each weatherstip is manufactured to factory specifications and features correct mounting locations for installation. Each felt features...

Correct reproduction of the original standard outer door mirror gasket originally installed on all 1970-81 models with chrome mirrors. Manufactured in injection molded ABS to factory specifications. Fits left or right hand...

Replace the old splash aprons with this quality reproduction and keep your engine compartment clean and free of water, salt, and other road debris. Each splash apron set is designed to fit as original ensuring a complete seal...

Reproduction of the original style clips designed to install the hood to cowl seal on 1970-81 Camaro and 1977-81 Firebird models. The hood to cowl weatherstrip seal attaches to the cowl top vent grill area between the hood...

Correct reproduction of the original outer door bullet mirror gasket designed for use on various GM models. This gasket separates the mirror base from the outer door metal. For use with bullet style mirrors in the various...

Correct replacement hood rubber stopper including correct configuration and design. Manufactured in rubber material same as original. Sold individually. 4 required per vehicle.

This special front fender and front spoiler welting is designed to help to seal fender flares or front spoiler extensions to the body. Although the configuration can vary from model to model, this welting can be used...

Reproduction of the original control arm bushing designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models. Each upper control arm bumper is manufactured in the correct dimension using quality hardened EPDM...

Reproduction of the original outer rear hood bumpers designed for use on various GM models as listed. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment....

OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...

Reproduction door handle gasket for 1970-81 GM F-Body and 1973-88 G-Body models. This gasket inserts on the back of the outer door handle and acts as protection between the handle and the paint. Sold individually. 2 gaskets...

Correct reproduction rubber bumper for 1970-81 Camaro models. This bumper is manufactured in quality EPDM rubber replicating the original in quality and design. Fits on the rear outer section. The hood rests on the bumper...

Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...

Reproduction of the original heater pipe grommet for use on vehicles original equipped with air conditioning. Each grommet is manufactured to replicate the original in quality and design. Features a rubber outer body with a...

The stoppers will help keep your panels in the correct alignment positions. The kit includes all of the correct rubber stoppers needed for the doors, hood, trunk lid, console, and glove box. OER® recommends replacing all of...

Reproduction of the of the original door lock rod rubber silencer designed for use on all 1970-81 Camaro and Firebird models. This rubber piece attaches to the inner door and the lock rod unit passes thru this molded rubber...

Correct reproduction of the original style weatherstripping which attaches to the cowl top vent grill and seals the area between the hood and the cowl panel. This is a correct reproduction of the original seal that includes...

OER® reproduction upper clutch push rod boot for various 1970-81 Buick, Chevrolet, Oldsmobile and Pontiac models. Each clutch rod boot is manufactured in quality EPDM rubber matching the original boot cosmetically in...

Correct replacement bumper to eliminate the lid from touching the body and causing unnecessary damage. Dimensions: Body Diameter: 7/8" Body Height: 1/2" Mounting hole diameter: 7/32" Overall Height: 13/16" Sold...

Correct reproduction of the original rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit...

Reproduction of the original door glass guide stop bumpers designed for use with various 1968-81 General Motors vehicles. These glass guide stops are required for proper door glass alignment. Commonly damaged during removal...

Reproduction door window stop for 1970-81 models. Replace your damaged original door window stoppers with this correctly plated and rubber coated reproduction. Manufactured from high quality die stamped steel. Includes clear...

Reproduction front door run window felts for the outer section of the door window on 1970-81 Camaro models. This reproduction window felt is a 2 piece set without chrome bead. Includes all of the features of original style...

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...

Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...

Reproduction roof rail weatherstrip channel screw set for 1970-81 Camaro, Firebird, and other various GM models. These screws feature the correct style large head that is required for mounting coupe weatherstrip channels. #8...

Replacement style self-tapping screws designed to attach the weatherstrip channels on 1962-67 Chevy II/Nova, 1967-69 Camaro. and 1967-69 Firebird coupe or convertible models. These screws feature the large head that is...

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...