1970 Chevrolet Camaro Parts - Lighting

OER® reproduction of the original bayonet style fiber optic lamp socket designed for use on various GM models. Each socket will replace the original and get your bulbs working again! Most common uses are column gearshift...

Reproduction of the original tail lamp lens designed for use on all 1970-71 Chevrolet Nova models. Each tail lamp lens is designed to replicate the original in every detail. Manufactured using quality injection molded acrylic ABS lens material. Features a square back-up lens found on 1970 and early 1971 (1st design) models. Tail light lenses feature correct SAE and "Guide" markings for authenticity. Chevrolet Applications: 1970-1971 Chevrolet Nova (1971 1st design) (passenger side) Important: All 1970 & early production 1971 models feature a small rectangular shaped back-up light lens in the center of the lens. Later production 1971 & all 1972 models were produced with a larger square shaped back-up light lens. The later production lens required the upper and lower center screw holes to be slightly offset rather than centered. 1971 Owners: If you are unsure of which housing your vehicle is equipped with, please check the positioning of the upper and lower screw holes in the lenses, and match them to your housings. Note: For late production 1971 model with square-shaped backup lens, refer to Part # 5964514

Correct reproduction dome lens and reflector that installs on the center roof area. This is a exact reproduction for 1969-70 Chevrollet Impala/full size cars and 1970 Camaro models. Harness and bulb sold separately. Applications: 1969-70 Chevrolet Impala/full size 1970 Chevrolet Camaro

Reproduction rear back-up lamp lens for 1970-71 Camaro Rally Sport (RS) models. Features correct SAE and Guide lettering for an authentic appearance. Includes correct outer chrome trim ring. This early 1970-71 1st design RS...

Reproduction of the original reat tail lamp lenses and back up lenses for use with 1970-71 Camaro Rally Sport models (1st design). This kit features 4 lenses with chrome trim rings that were stock for RS models. Includes 2...

Reproduction rear back-up lamp lens for 1970-71 Camaro Rally Sport (RS) models. Features correct SAE and Guide lettering for an authentic appearance. Includes correct outer chrome trim ring. This early 1970-71 1st design RS...

Reproduction rear back-up lamp lens for 1970-71 Camaro standard models (except RS). Features correct SAE and Guide lettering for an authentic appearance. Includes correct outer chrome trim ring. This early 1970-71 1st...

Save when ordering a complete set of tail lamp and back-up lamp lenses for your 1970-71 Camaro standard model. This kit features lenses without chrome trim rings and includes 2 tail lamp lenses and 2 back-up lamp lenses with...

Reproduction rear back-up lamp lens for 1970-71 Camaro standard models (except RS). Features correct SAE and Guide lettering for an authentic appearance. Includes correct outer chrome trim ring. This early 1970-71 1st...

Reproductrion of the original molded gaskets designed for use with 1970-73 park lamp lenses. Each gasket is manufactured to OE specifications and molded to ensure an authentic appearance and fit. This gasket is used to seal...

Reproduction rear tail lamp lens for 1970-73 Camaro Rally Sport (RS) models. Each lens is manufactured in quality injection-molded ABS acrylic lens material to factory specifications. Includes correct outer and inner chrome...

Reproduction of the original standard Camaro park lamp assembly designed for use on 1970-73 Camaro standard models. Each park lamp assembly is manufactured to exact factory specifications. Features an aluminum housing, clear...

Reproduction of the original headlamp bezel designed for use with all 1970-73 Chevrolet Camaro models. Each bezel is manufactured in quality stamped aluminum to the original configuration replicaing the original in quality...

Quality reproduction of the original rear license lamp lens designed for use on 1970-73 Camaro models. Each lens is injection molded in quality clear acrylic ABS featuring the correct SAE Guide markings for authenticity. Sold...

OER reproduction of the original rear license lamp assembly housings for use on all 1970-73 Camaro models. Features a correct steel lamp housing and authentic license lamp lens. Lens features correct SAE and "Guide" markings...

Reproduction of the original tail lamp housings designed for use with 1970-73 Chevrolet Camaro standard, RS, SS and Z28 models. Each housing is manufactured in quality injection-molded ABS replicating the original in...

Reproduction of the original rear quarter side marker lamp lens designed for use on 1970-1973 Camaro models. Manufactured in quality injection molded acrylic ABS that offers an original appearance and fit. Replace the...

Reproduction rear tail lamp lens for 1970-73 Camaro standard models (except RS). Each lens is manufactured in quality injection-molded ABS acrylic lens material to factory specifications. Includes correct outer chrome trim...

Reproduction of the original headlamp housing designed for use with 1970-73 Chevrolet Camaro models. Each headlight housing is manufactured in quality stamped steel and replicates the original in every detail. Includes...

Reproduction of the original front and rear side marker lens assemblies designewd for use with 1970-73 Camaro models. Each lens is manufactured to exact factory specifications replicating the original in appearance, and...

Reproduction of the original rear license lamp housing designed for use on 1970-73 Camaro models. Each housing is manufactured to factory specifications and cad plated for an authentic appearance. Sold individually. 2...

Reproduction of the original license lamp gasket designed for use on 1970-73 Camaro models. Manufactured in the correct material and die-cut for a perfect fit. Sold individually. 2 required per vehicle. Applications:...

Reproduction of the original tail lamp gaskets designed for use with 1970-73 Chevrolet Camaro standard and RS models. Each gasket set is molded in quality EPDM rubber that replicates the original in appearance, fit and...

Reproduction rear tail lamp lens for 1970-73 Camaro standard models (except RS). Each lens is manufactured in quality injection-molded ABS acrylic lens material to factory specifications. Includes correct outer chrome trim...

OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...

Reproduction rear tail lamp lens for 1970-73 Camaro Rally Sport (RS) models. Each lens is manufactured in quality injection-molded ABS acrylic lens material to factory specifications. Includes correct outer and inner chrome...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

Reproduction of the original headlamp housing designed for use with 1970-73 Chevrolet Camaro models. Each headlight housing is manufactured in quality stamped steel and replicates the original in every detail. Includes...

Reproduction of the original standard Camaro park lamp aluminum trim designed for use on 1970-73 standard Camaro models. Manufactured in quality stamped alinimum, bezels are designed to install on original GM or OER...

Reproduction of the original standard park lamp lenses designed for use with all 1970-73 standard Camaro models. Each lens is injection molded to factory specifications in quality clear acrylic lens material. Will install...

OER® reproduction headlamp bulb adjusting spring for 1970-73 Camaro, 1969-72 Chevy, GMC truck, 1971-72 Monte Carlo, 1971-75 Vega, and various GM models as listed. Manufactured from high quality carbon steel music wire as...

Reproduction of the original headlamp bezel designed for use with all 1970-73 Chevrolet Camaro models. Each bezel is manufactured in quality stamped aluminum to the original configuration replicaing the original in quality...

Quality reproduction license lamp lens and gasket for 1970-73 Camaro models. Each lens is injection molded and manufactured to exact specifications. Features factory correct SAE and "Guide" markings for authenticity. Comes...

OER® reproduction of the original front park lamp assembly designed for use with all 1970-1973 Camaro Rally Sport models. Each park lamp lens is manufactured to original GM specifications including correct lens, housing,...

Reproduction of the original standard Camaro park lamp assembly designed for use on 1970-73 Camaro standard models. Each park lamp assembly is manufactured to exact factory specifications. Features an aluminum housing with...

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Replacement single terminal door jamb switch designed for use on various models. Replace the old, damaged or non working door jamb switch with this quality service replacement. The door jamb switch will get your interior...

Reproduction or service replacement lamp socket and pigtail for a wide variety of GM applications. Produced iin high quality heat resistant plastic with stamped steel contacts anodized in silver for corrosion resistance and...

Reproduction of the original headlamp mounting bucket designed for use on various GM models. This headlight bucket keeps the headlamp beam in position once installed. The headlamp bucket attaches to the headlamp housing using...

Correct replacement lens and reflector installs on the center roof area. This round dome lens was originally installed on various 1969-76 GM models. Note: For 1977-81 models dome lens and reflector must be purcha sed...

OER® Reproduction of the original stamped steel headlamp retaining ring designed for use with various various 1941-74 GM car and truck models. Each headlight retaining ring is designed to hold the sealed beam into the...

Reproduction of the original side marker lamp lens designed for use on 1970-1977 Camaro models. Manufactured in quality injection molded acrylic ABS that offers an original appearance and fit. Replace the cracked or faded...

The correct hardware will make your headlight adjustment hardware installation easier. Includes appropriate hardware for adjusting the headlamp. See applications below. Set includes adjusters for both right and left...

Reproduction of the original shouldered lens screw for use with various GM models from 1965-76. Each screw is chrome-plated stainless steel for superior corrosion resistance and an outstanding appearance. Common uses include...

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...

Correct reproduction of the original front fender side marker lamp retainer designed for use on 1970-81 Camaro models. This retainer is designed to hold the side marker lamp assembly to the front fender. This retainer is...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

Replacement bulb for a variety of applications. Applications may vary depending on vehicle model and year.

Replace your original glove box lamp with this correct service replacement for 1955-72 GM models. Features correct orange color coated wire, lamp, socket, housing, and switch. Includes short red lead for early applications...

This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

The headlight dimmer switch is located on the drivers front floor and is used to switch the headlights from low beam to high beam. This OER® Authorized reproduction switch is correct for all models which include a floor...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out.

Reproduction of the original brake light switch designed for use with various 1955-1990 AMC, Chrysler, Dodge, Plymouth, General Motors, and Ford models as listed below. Activated by the brake pedal arm, this switch causes the...

Replacement door jamb switch for use on various 1968-92 GM models. This 2 terminal switch is manufactured to fit and function as original and specifically designed for the models listed below. Replacing this switch will help...

This is a replacement socket assembly used with all 1959-2001 side marker lamps. For use with bulb 158, 194, or 194A (not included). This socket assembly can be used for all side marker assemblies, front or rear. {fitment}

Modernize the lighting equipment on your vehicle with these bright 6000k LED light bulb units. Manufactured to replace common bulbs on any vehicle with 12V capacity. LED bulbs not only react faster than traditional bulbs, but...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.