1970 Chevrolet Camaro Parts - Interior Soft Goods

Reproduction of the original style door panel installation clips used to install 1967-79 front door panels or for coupe rear quarter sail panels on various GM models. Clips can be used for standard and deluxe interiors. See...

Reproduction of the plastic push-in firewall pad retainer clips used to attach the pad to the firewall. Dimensions 1" head x 7/16" dia. x 1-7/16" length. The OER® Authorized logo represents products that meet or exceed...

This universal fit seat foam is a high density sheet suitable for all non-molded bench seats including rear seats and wagon seats. When replacing the seat covers or upholstery in most trucks or vehicles, this non-molded seat...

OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...

Reproduction of the original chrome sheet metal screws designed for various applications on 1960's, 1970's and 1980's models where #8 x 1-1/2" chrome screws were applied. Each screw replicates the original in appearance and...

Reproduction of the original style door panel clips designed for use on various 1962-79 GM vehicles. These clips are specifically designed to install 1962-79 front door panels and rear quarter side panels on various models....

Reupholstery padding kit for front bucket seats. Comes with material to insulate and pad seat frames prior to installing new upholstery. Include enough material to reupholster both front bucket seats on a wide variety of...

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

This tool is great for tucking headliner or upholstery material into tedious channels without damaging the material. Headliner installation is almost never easy, but having the right tools can make it much easier. This tool...

When it comes to installing upholstery in your classic, be sure you have the tight tools to get the job done. OER® offers this basic upholstery installation kit including high quality hog ring pliers and enough hog rings...

We now offer #8 x 1" chrome sheet metal screws with integral washer. These screws were designed for use on many different components including, interior pillar post moldings, kick panels, rear side panels, interior door...

Reproduction of the plastic push-in firewall pad retainer clips used to attach the pad to the firewall. Dimensions 1" head x 7/16" dia. x 1-7/16" length. Quantities vary by model, use as needed. The OER® Authorized logo...

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Plastic firewall insulation retainer clip for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Sold individually. Use as required. The OER® Authorized logo...

Set of 60 hog rings comes in this set. Enough hog rings to install a complete set of upholstery for front and rear seats. Note: For a Hog ring kit with deluxe installation pliers, see part # K10010 You are assured that...

Reproduction of the original door lock bellcrank retainer designed for use with various 1969-81 Chevrolet, Buick, Pontiacm and Oldsmobile models as listed below. Manufactured in injection molded white nylon material matching...

OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds,...

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel...

This quality upholstery installation kit includes 60 hog rings and professional style heavy duty pliers. Total of 60 hog rings come in each kit to be applied as needed, more hog rings are available for purchase separately but...

Set of 7, nylon firewall insulation retainer clips for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Made of durable black nylon plastic. The OER®...

Interior seat foam is a critical part of upholstery restoration that is often overlooked. Replacing your seat foam not only offers you a more comfortable place to sit, but also generally makes for a better fit and look when replacing your original upholstery. Manufactured as close to original density as possible for authenticity and fit. Take the hassle out of installing your new set of upholstery by adding this OEM style seat foam. Each seat foam is molded with correct contours to give your seats a quality original appearance. Made in USA Note: Shipped double oversize. Applications 1970 Camaro with standard interior 1970 Camaro with deluxe interior 1970 Camaro with Comfortweave interior

Replacing the carpet in your classic requires time and effort. Especially if you want the job done right. That's why we offer the carpet and sound deadener/underlay in one kit. After removing the original carpet, you'll probably want to replace the underlay. The underlay material insulates the interior and helps deaden the road noise. After many years, the material may become brittle or worn out. Replacing your underlay will help to keep heat and noise out of your interior. OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry to produce a high quality replication of the original carpet fiber. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet. This reproduction carpet eliminates the problems of poor abrasion resistance and shedding of fibers while providing excellent protection against color fading, offering a level of durability previously unavailable.  Molded Carpet Features: Carpet is Pre-Molded to The Floor Pan for a Perfect Fit! Includes Carpet Tail Carpet to Cover Rear Seat Center Divider Section Comes complete with die-cut carpet underlay (7 piece set for front and rear) Color-Matched Binding Attached to the Rear Edge of the Front Carpet (when applicable) Color-Keyed Heel Pad is Dielectrically Heat Sealed Onto the Carpet Original Style 36 oz. Jute Padding Attached to the Underside of the Carpet Dimmer Switch Hole Grommet (when applicable) Heat Stamped, Preformed and Trimmed to Fit the Floor Pan Finest Quality Molded Carpet on the Market! Made in USA Applications: 1970 Chevrolet Camaro (with auto trans) (green) 1970 Pontiac Firebird (with auto trans) (green) Important: Due to variations in factory interior options (bucket seats, bench seat, floor shift, etc.), minor trimming may be required for proper fit.

Replacing the carpet in your classic requires time and effort. Especially if you want the job done right. That's why we offer the carpet and sound deadener/underlay in one kit. After removing the original carpet, you'll probably want to replace the und erlay. The underlay material insulates the interior and helps deaden the road noise. After many years, the material may become brittle or worn out. Replacing your underlay will help to keep heat and noise out of your interior. OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry to produce a high quality replication of the original carpet fiber. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet. This reproduction carpet eliminates the problems of poor abrasion resistance and shedding of fibers while providing excellent protection against color fading, offering a level of durability previously unavailable.  Molded Carpet Features: Carpet is Pre-Molded to The Floor Pan for a Perfect Fit! Includes Carpet Tail Carpet to Cover Rear Seat Center Divider Section Comes complete with die-cut carpet underlay (7 piece set for front and rear) Color-Matched Binding Attached to the Rear Edge of the Front Carpet (when applicable) Color-Keyed Heel Pad is Dielectrically Heat Sealed Onto the Carpet Original Style 36 oz. Jute Padding Attached to the Underside of the Carpet Dimmer Switch Hole Grommet (when applicable) Heat Stamped, Preformed and Trimmed to Fit the Floor Pan Finest Quality Molded Carpet on the Market! Made in USA Applications: 1970 Chevrolet Camaro (with 4/speed) (green) 1970 Pontiac Firebird (with 4/speed) (green) Important: Due to variations in factory interior options (bucket seats, bench seat, floor shift, etc.), minor trimming may be required for proper fit.

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

Interior seat foam is a critical part of upholstery restoration that is often overlooked. Replacing your seat foam not only offers you a more comfortable place to sit, but also generally makes for a better fit and look when replacing your original up holstery. Manufactured as close to original density as possible for authenticity and fit. Take the hassle out of installing your new set of upholstery by adding this OEM style seat foam. Each seat foam is molded with correct contours to give you r seats a quality original appearance. Made in USA Note: Shipped oversize. Applications 1970 Camaro with standard interior 1970 Camaro with deluxe interior 1970 Camaro with Comfortweave interior

Replacing the carpet in your classic requires time and effort. Especially if you want the job done right. That's why we offer the carpet and sound deadener/underlay in one kit. After removing the original carpet, you'll probably want to replace the underlay. The underlay material insulates the interior and helps deaden the road noise. After many years, the material may become brittle or worn out. Replacing your underlay will help to keep heat and noise out of your interior. OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry to produce a high quality replication of the original carpet fiber. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet. This reproduction carpet eliminates the problems of poor abrasion resistance and shedding of fibers while providing excellent protection against color fading, offering a level of durability previously unavailable.  Molded Carpet Features: Carpet is Pre-Molded to The Floor Pan for a Perfect Fit! Includes Carpet Tail Carpet to Cover Rear Seat Center Divider Section Comes complete with die-cut carpet underlay (7 piece set for front and rear) Color-Matched Binding Attached to the Rear Edge of the Front Carpet (when applicable) Color-Keyed Heel Pad is Dielectrically Heat Sealed Onto the Carpet Original Style 36 oz. Jute Padding Attached to the Underside of the Carpet Dimmer Switch Hole Grommet (when applicable) Heat Stamped, Preformed and Trimmed to Fit the Floor Pan Finest Quality Molded Carpet on the Market! Made in USA Applications: 1970 Chevrolet Camaro (with manual trans) (orange) 1970 Pontiac Firebird (with manual trans) (orange) Note: For models with manual transmission see part # R2199. Important: Due to variations in factory interior options (bucket seats, bench seat, floor shift, etc.), minor trimming may be required for proper fit.

Replacing the carpet in your classic requires time and effort. Especially if you want the job done right. That's why we offer the carpet and sound deadener/underlay in one kit. After removing the original carpet, you'll probably want to replace the underlay. The underlay material insulates the interior and helps deaden the road noise. After many years, the material may become brittle or worn out. Replacing your underlay will help to keep heat and noise out of your interior. OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry to produce a high quality replication of the original carpet fiber. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet. This reproduction carpet eliminates the problems of poor abrasion resistance and shedding of fibers while providing excellent protection against color fading, offering a level of durability previously unavailable.  Molded Carpet Features: Carpet is Pre-Molded to The Floor Pan for a Perfect Fit! Includes Carpet Tail Carpet to Cover Rear Seat Center Divider Section Comes complete with die-cut carpet underlay (7 piece set for front and rear) Color-Matched Binding Attached to the Rear Edge of the Front Carpet (when applicable) Color-Keyed Heel Pad is Dielectrically Heat Sealed Onto the Carpet Original Style 36 oz. Jute Padding Attached to the Underside of the Carpet Dimmer Switch Hole Grommet (when applicable) Heat Stamped, Preformed and Trimmed to Fit the Floor Pan Finest Quality Molded Carpet on the Market! Made in USA Applications: 1970 Chevrolet Camaro (with auto trans) (orange) 1970 Pontiac Firebird (with auto trans) (orange) Note: For models with manual transmission see part # R2199M. Important: Due to variations in factory interior options (bucket seats, bench seat, floor shift, etc.), minor trimming may be required for proper fit.

Reproduction of the original arm rest pad designed for use on 1970-71 Chevrolet Camaro and 1971 Pontiac Firebird models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the...

Reproduction of the original arm rest pad designed for use on 1970-71 Chevrolet Camaro and 1971 Pontiac Firebird models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the...

OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...

Reproduction of the original arm rest pad designed for use on 1970 Chevrolet Camaro and models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the original in appearance and design. Features a correct Madrid grain pattern along with an authentic feel and fit. Sold individually. 2 required. Fits LH or RH. Applications: 1970-1970 Chevrolet Camaro (standard interior) (bright blue) Made in USA

Replacing the carpet in your classic requires time and effort. Especially if you want the job done right. That's why we offer the carpet and sound deadener/underlay in one kit. After removing the original carpet, you'll...

Reproduction of the original arm rest pad designed for use on 1970-71 Chevrolet Camaro and 1971 Pontiac Firebird models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the...

Reproduction of the original arm rest pad designed for use on 1970-71 Chevrolet Camaro and 1971 Pontiac Firebird models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the...

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

Reproduction of the original arm rest pad designed for use on 1970-71 Chevrolet Camaro and 1971 Pontiac Firebird models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the...

OER reproduction of the original rear inner side panels designed for use on 1970-71 Camaro and Firebird models. Each panel is manufactured in ABS to original specifications using quality injection molded tooling featuring...

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

Reproduction of the original arm rest pad designed for use on 1970-71 Chevrolet Camaro and 1971 Pontiac Firebird models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the...

Replacing the carpet in your classic requires time and effort. Especially if you want the job done right. That's why we offer the carpet and sound deadener/underlay in one kit. After removing the original carpet, you'll probably want to replace the underlay. The underlay material insulates the interior and helps deaden the road noise. After many years, the material may become brittle or worn out. Replacing your underlay will help to keep heat and noise out of your interior. OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry to produce a high quality replication of the original carpet fiber. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet. This reproduction carpet eliminates the problems of poor abrasion resistance and shedding of fibers while providing excellent protection against color fading, offering a level of durability previously unavailable.  Carpet Features: Molded Carpet Features: Carpet is Pre-Molded to The Floor Pan for a Perfect Fit! Includes Carpet Tail Carpet to Cover Rear Seat Center Divider Section Comes complete with die-cut carpet underlay (7 piece set for front and rear) Color-Matched Binding Attached to the Rear Edge of the Front Carpet (when applicable) Color-Keyed Heel Pad is Dielectrically Heat Sealed Onto the Carpet Original Style 36 oz. Jute Padding Attached to the Underside of the Carpet Dimmer Switch Hole Grommet (when applicable) Heat Stamped, Preformed and Trimmed to Fit the Floor Pan Finest Quality Molded Carpet on the Market! Made in USA Chevrolet Applications: 1970 Chevrolet Camaro (with automatic) (gold) 1973 Chevrolet Camaro (with automatic) (gold) Pontiac Applications: 1970 Pontiac Firebird (with automatic) (gold) 1973 Pontiac Firebird (with automatic) (gold) Note: For models with manual transmission see part # R2105M. Important: Due to variations in factory interior options (bucket seats, bench seat, floor shift, etc.), minor trimming may be required for proper fit.

OER reproduction of the original rear inner side panels designed for use on 1970-71 Camaro and Firebird models. Each panel is manufactured in ABS to original specifications using quality injection molded tooling featuring...

High quality reproduction of the 1970-71 inner lower door panel designed for 1970-71 Camaro and Firebird models. Each panel is manufactured with injection molded tooling using quality ABS material that replicates the original...

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

Replacing the carpet in your classic requires time and effort. Especially if you want the job done right. That's why we offer the carpet and sound deadener/underlay in one kit. After removing the original carpet, you'll...

High quality reproduction of the inner lower door panel designed for 1970-71 Camaro and Firebird models. Each panel is manufactured with injection molded tooling using quality ABS material that replicates the original in...

Reproduction of the original arm rest pad designed for use on 1970-71 Chevrolet Camaro and 1971 Pontiac Firebird models. Each pad is manufactured using automotive grade self-skin urethane material that replicates the...

OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...

OER reproduction of the original arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the...

Produced using modern urethane materials this reproduction arm rest pad offers a cleaner, more tapered look than the originals. Includes correct Madrid grain material with factory interior colors. Truly the finest...

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

CLOSEOUT. These are a "paint-to-match" arm rest base that are molded Gold in color. These are being offered at highly discounted CLOSEOUT pricing. All sales are final. Quantities are limited to inventory on hand. Once these are gone, they are gone for good. No returns for reasons due to color match. Paint to match your interior color Note: Arm rest base molding is sold separately. Arm rest base molding , part # K967, is original for 1968 models. However, can be installed on 1969-72 models. Chevrolet Original Fit Applications: 1970 Chevrolet Chevelle 1970 Chevrolet Malibu 1970 Chevrolet El Camino 1970 Chevrolet Monte Carlo Chevrolet Applications - Paint to Match: 1968-69 Camaro 1968-70 Impala/Full Size - 4-door and wagon models 1968-72 Chevelle/Malibu/El Camino 1970-72 Monte Carlo Buick Applications - Paint to Match: 1968-72 Skylark - 4 door Oldsmobile Applications - Paint to Match: 1968-72 Cutlass/442 Pontiac Applications - Paint to Match 1968-69 Firebird 1968-72 GTO 1968-72 Lemans 1968-72 Tempest 1968-72 Catalina

OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...

OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

OER® reproduction of the original style inner rear sail panels for 1970-73 models with a bow style headliner. Each panel is injection molded as original featuring correct grain, coat hook hole and mounting tab locations...

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....

OER Authorized molded carpet sets are manufactured utilizing modern textile chemistry. This revolutionary new 80%-20% Rayon/Nylon blend yarn duplicates the original appearance and fit of the original factory loop carpet....