1970 Chevrolet Camaro Parts - Dash Components

This is the correct clip set designed to install OER reproduction 1970-78 padded dashes. Clip sets are manufactured to original specifications using stamped steel. This 6-piece kit contains 3 short clips, and 3 long clips...

This is the correct set of 3 clips used to install a GM Original 1970-78 Camaro padded dash. The original GM dash installs with 3 clips, including 1 long 3980361 and 2 short 3980355 clips. {fitment}

OER® reproduction of the original in dash amps gauge originally installed in 1970-75 Chevrolet Camaro models that were equipped with the factory gauge package. This gauge is manufactured to factory specifications....

OER® reproduction of the original lower dash panel assembly that houses the in-dash radio, glove box section, and air vent assembly. Each panel is manufactured in quality injection-molded ABS replicating the original in...

Reproduction of the original and rare optional dash defogger bezel for use on 1970-78 Camaro models. This zinc die-cast reproduction is manufactured to correct factory specifications and features a black and silver finish...

OER® reproduction of the original center in-dash clock assembly designed for use with 1970-78 models. Each clock is manufactured to original factory specifications featuring a stamped steel backing plate, black clock face...

OER® reproduction of the original in-dash temperature gauge unit designed for use with 1970-79 Camaro models that were originally equipped with the optional factory gauge package. Each gauge is manufactured to replicate...

Correct reproduction of the original dash glove box bracket arm designed for use with 1970-81 Camaro models. This metal stamped bracket is used to keep the glove box door level when door is opened. Includes correctly shaped...

Quality replacement style dash defogger switch designed for use on 1970-78 Camaros that included the optional rear window defogger switch. The rear window defogger was designed to allow clear visibility through the rear...

Instrument cluster lamp bayonet style sockets for general use from 1967-2000.

Reproduction of the original dash carrier bezel assembly screw and J-nut set designed to install the dash carrier on 1970-1978 Camaro models. Each set includes 4 black oxide #8 screws and 4 phosphate # 8 J-nuts to mount the...

Reproduction of the original dash knobs designed for use on various 1969-70 Chevrolet models. This complete dash knob set will replace the old or worn out original knobs and help bring your dash back to a factory fresh...

Reproduction of the original dash carrier bezel assembly designed for use on 1970-1972 Chevrolet Camaro models. Each dash carrier is precision manufactured in quality injection molded ABS and replicated the original dash...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER® reproduction of the original dash lens assembly designed for use on 1970-78 Camaro models with gauges. This is an injection molded reproduction of the original instrument cluster lens assembly and is designed to...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER® reproduction of the original dash instrument cluster case designed for use on 1970-78 Camaro models without gauges. This injected molded reproduction instrument cluster case and lens assembly features the correct...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

Reproduction of the original style padded dash clip designed to install a reproduction 1970-1978 Camaro padded dashes. Clip is manufactured to original specifications using stamped steel that is heat treated for extra...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

OER reproduction of the original Camaro interior dash pad, produced from all-new tooling and Made-In-USA! Manufactured using modern urethane materials with a molded-in color process (not painted). Each dash features correct...

This is the correct clip designed to install an OER reproduction 1970-78 padded dashes. Clip is manufactured to original specifications using stamped steel. This is the shorter clip of the two original clips used to install...

Superb reproduction of the original Camaro interior dash pad designed for 1970-78 Chevrolet Camaro models. Each dash pad is manufactured using OEM-style vinyl skin over foam materials that produce a beautiful replica of the...

OER® reproduction of the original dash heater control knobs designed for use on various 1965-1989 GM models. Each knob is reproduced to exact dimensions and cosmetically correct. Manufactured in injection molded black ABS...

Reproduction of the original dash knobs designed for use on various 1969-70 Chevrolet models. This complete dash knob set will replace the old or worn out original knobs and help bring your dash back to a factory fresh...

Superb reproduction of the original Camaro interior dash pad designed for 1970-78 Chevrolet Camaro models. Each dash pad is manufactured using OE-style vinyl skin over foam materials that produce a beautiful replica of the...

OER® reproduction of the original dash heater control knobs designed for use on various 1965-1989 GM models. Each knob is reproduced to exact dimensions and cosmetically correct. Manufactured in injection molded ABS and...

Reproduction of the original headlamp switch knob and stem unit designed for use on various Chevrolet models including 1969-70 Camaros. This headlight switch knob includes a matt black center with a chrome outer section. ...

Reproduction of the original heater control lens for 1970-72 Chevrolet Camaro models with factory air conditioning. Each lens is manufactured in injection-molded acrylic with correct white lettering and factory symbols...

Reproduction of the original heater control lens for 1970-72 Chevrolet Camaro models without air conditioning. Each lens is manufactured in injection-molded acrylic with correct white scripts and coloring offering an...

Correct OER® reproduction of the original cigarette lighter housing retainer for use on various GM models equipped with Rochester style cigarette lighter assemblies. This steel retainer holds the lighter housing in the...

Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

Reproduction of the original Emergency flasher knob designed for use on various GM models including 1967-70 Camaros. This hazard switch knob is manufactured in die-cast Zinc and chrome plated just like the original. ...

Reproduction of the original 150 MPH speedometer designed for use on 1970-1974 Chevrolet Camaro models. Each speedometer gauge is manufactured to original factory specifications including the correct faceplate featuring...

High quality reproduction of the original hazard flasher knob designed for use on various GM models. This authentic replacement is manufactured in zinc die-cast material than chrome plated to a lusterous shine. Features the...

Reproduction of the original spring clip used to install the heater control lens on various 1969-79 GM models. These spring clips are manufactured to factory specifications and replace the original clips exactly. Will install...

High quality OER® reproduction of the original dash glove box door designed for use on 1970-77 Chevrolet Camaro models. Glove box door is manufactured in injection molded ABS to factory specifications featuring corectly...

Reproduction of the original instrument cluster case designed for 1970-81 Chevrolet Camaro models. This is an injected molded reproduction of the original instrument cluster case designed to replace your cracked or damaged...

OER® reproduction of the original 1970-78 Chevrolet Camaro tachometer designed to replicate the original in quality, appearance, and functionality. This tachometer was available for all Camaro models equipped with the...

Reproduction of the original 130 MPH speedometer designed for use on 1970-1978 Chevrolet Camaro models. Each gauge is manufactured to original specifications including the correct faceplate featuring correct color...

Reproduction of the original in-dash fuel gauge installed in 1970-78 Chevrolet Camaro models. Each fuel gauge is manufactured to factory specifications featuring a correct black front face with original style markings. This...

This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...

Reproduction of the original instrument cluster case designed for 1970-80 Chevrolet Camaro models. This is an injected molded reproduction of the original instrument cluster case designed to replace your cracked or damaged...

Reproduction of the original printed circuit designed for use with 1970-81 Chevrolet Camaro models with warning lights. Each printed circuit unit is meticulously manufactured to exact factory specifications and replaces the...

Reproduction of the original glove box striker designed for use on 1970-81 Camaro models. Manufactured in stamped steel to the original configuration. Features correct mounting holes for installation. This striker mounts to...

Reproduction of the original instrument gauge lens designed for use on 1970-81 Camaro models. Each lens is manufactured in quality acrylic lens material and replace the old, yellowed or worn out original. Renew the look of...

You are assured that every OER® part offered is manufactured to exact specifications and will fit and function just like the original part. What's more, most OER® products are officially licensed and carry a full 1...

OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...

Reproduction of the original glove box support strap designed foruse with all 1970-81 Camaro models. Manufactured in stamped steel to factory configuration. This steel strap secures the glove box to the dash. One required. ...

Reproduction of the original printed circuit designed for use with 1970-81 Chevrolet Camaro models with the optional gauge package. Each printed circuit unit is meticulously manufactured to exact factory specifications and...

This OER® reproduction of the original fuel and volt gauge mounting plate designed for use on 1970-81 Chevrolet Camaros. This plate is designed to allow the installation of the Fuel and Volt gauge into the dash assembly....

OER® reproduction of the original headlamp mounting switch nut designed for use with various 1968-82 GM models. Manufactured to factory specifications, this headlamp switch mounting nut is used to retain the headlamp...

Reproduction of the original wiper switch knob designed for use on various 1969-81 GM models. Manufactured in quality injection molded ABS and features a correct chrome finish with ribbed center design. Attaches to the wiper...

Having the proper tools can make a difficult job simple. One of the most frustrating thing for mechanics and restorers alike is that most cars have some parts which seem to require a magic wand to remove. Well, here's the...