Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction of the original wheel opening molding screws designed to install wheel opening moldings on most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32"...
1966-67 Dodge, Plymouth B-Body; Rear Window Molding Clip Set; 2 Door Hardtop; 20 Piece Set
Premier rear window molding clips for 1966-67 Dodge or Plymouth B-Body 2-door hardtop models. These clips attach the rear window molding to the body. Complete set for 1966-67 Coronet models. Also found on the upper/lower...
1966-68 Dodge, Plymouth B, C-Body; Rear Window Molding Clip; Individual Clip
OER Premier rear window molding clip for 1966-67 Dodge or Plymouth B-Body and 1966-68 C-Body models. These clips attach the rear window molding to the body. Correct for 1966-67 Coronet models. Also, can be used on the...
1966-67 Dodge Charger, Coronet; Rocker Panel Moldings; Pair
Reproduction of the original rocker panel moldings designed for use with 1966-67 Didge Charger and Coronet models. Each panel is manufactured in quality stamped aluminum replicating the original configuration and appearance....
Reproduction of the original style outer sail panel moldings for use with 1966-67 Dodge Coronet, Plymouth Belvedere, GTX, and Satellite 2-door hardtop models. These outer sail panel moldings mount at the bottom of the sail...
1967 Dodge Coronet Hood Lip Molding - 52-1/2" O.L.
Factory-style replacement hood lip molding for 1967 Coronet models. Mounts on the front edge of the hood and features the correct finish. Manufactured to factory specifications to properly replace the original molding. Made...
Premier reproduction front windshield molding clip set for 1966-1967 Charger, Coronet, Belvedere, and Satellite 2 door coupe and convertible models. Each clip set includes enough clips and screws to install a complete set of...
1965-67 Dodge Coronet Hood Lip Molding Hardware Set
Reproduction of the original hood lip molding mounting hardware designed for use with 1965-67 Dodge Coronet models. This set of 8 clips and 8 nuts mounts the molding to front edge of the hood. Size 10-24 x .73" with metal...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces OE # 4490167. Sold individually.
Premier reproduction front windshield molding clip for 1966-1967 Charger, Coronet, Belvedere, and Satellite 2 door coupe and convertible models (also fits some early 1968 models on the lower portion of the windshield...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Molding Clip, Push In, 1-1/4" With Top Tension Spring, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...