Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...


Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...


Product#: 3822

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 7/8" Diameter ; 3/8-16 x 1-1/2"; Zinc Plated

Reproduction bumper bolt for a variety of General Motors applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long life. Each bolt...


Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...


Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...


Product#: DB3586C

1966-67 Dodge Charger; Back Window Glass; Clear

Replace your pitted, scratched or broken original rear window glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...


Product#: DW671T

1966-70 Dodge, Plymouth B-Body; Windshield Glass; Hardtop, Convertible; Tinted with Shade

This replacement windshield is made with tempered laminate safety glass that is designed to protect passengers from road debris in the event of an accdent and features a green tinted band at the top. Each windshield features...


Product#: MD2207

1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side

Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...


Product#: MD2198

1966-70 Chrysler, Plymouth, Dodge A, B, C-Body; Convertible Top Hydraulic Cylinder; Each

Reproduction of the original convertible top cylinder designed for use with 1966-70 Chrysler, Dodge and Plymouth A, B, and C Body convertible models as listed. All convertible top cylinders are not the same. This convertible...


Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10...


Product#: DD3583C

1966 Mopar B-Body 2 Door Hardtop/Convertible Clear Replacement Door Glass; LH

Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Note: All glass is carefully packed by professionals to prevent...


Product#: DD3582C

1966 Mopar B-Body 2 Door Hardtop/Convertible Clear Replacement Door Glass; RH

Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Note: All glass is carefully packed by professionals to prevent...


Product#: MB249

1966-67 Dodge, Plymouth A & B Body; Front Outer Door Handle Set; with Chrome Buttons

Reproduction of the original outer door handles designed for use with various 1966-67 Dodge and Plymouth B Body models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome...


Product#: DQ3585T

1966-67 Dodge Charger; 2 door hardtop; Quarter Glass; Tinted; LH

Replace your pitted, scratched or broken original quarter glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...


Product#: DQ3584C

1966-67 Dodge Charger; Quarter Glass; Clear; RH

Replace your pitted, scratched or broken original quarter glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...


Product#: DQ3585C

1966-67 Dodge Charger; 2 Door Hardtop; Quarter Glass; Clear; LH

Replace your pitted, scratched or broken original quarter glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...


Product#: K51020

1962-76 GM, Dodge, Plymouth; Convertible Top Boot Storage Bag; Various Models

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...


Product#: MM2105

1966-74 Dodge, Plymouth; Lower Front Door Hinge; LH; Drivers Side; Various Models

Reproduction of the original door hinge designed for use on various Dodge and Plymouth A and B-Body models. The front doors on 1966-74 Mopar A and B-Body models were extremely heavy and hard on the original door hinges. Each...


Product#: MM2103

1966-70 Dodge, Plymouth B Body; Upper Front Door Hinge; LH; Drivers Side

Reproduction of the original door hinge designed for use on various Dodge and Plymouth B-Body models. The front doors on 1966-70 Mopar B-Body models were extremely heavy and hard on the original door hinges. Each door hinge...


Product#: MM2102

1966-70 Dodge, Plymouth B Body; Upper Front Door Hinge; RH; Passenger Side

Reproduction of the original door hinge designed for use on various Dodge and Plymouth B-Body models. The front doors on 1966-70 Mopar B-Body models were extremely heavy and hard on the original door hinges. Each door hinge...