1960-72 Chevrolet, GMC Truck; Rear Control Arm; LH; EDP Coated
Quality reproduction of the original rear control arm for use with 1960-72 Chevrolet and GMC truck models with rear coil springs. This control arm, also known as trailing arm, installs to the rear axle housing and the center...
1960-72 Chevrolet, GMC Truck; Rear Control Arm; Drivers Side; Silver Weld-Thru™ Coating
Quality reproduction of the original rear control arm for 1960-72 Chevrolet, GMC truck models with rear coil springs. This control arm is also known as a trailing arm. Installs to the rear axle housing and the center cross...
1960-72 Chevrolet, GMC Truck; Rear Control Arm; RH; EDP Coated
Quality reproduction of the original rear control arm for use with 1960-72 Chevrolet and GMC truck models with rear coil springs. This control arm, also known as trailing arm, installs to the rear axle housing and the center...
Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1960-62 Chevy and GMC C10 Pickup; Ball Joint; Lower
1960-62 Chevrolet C10 and GMC 1000 series lower ball joint. The ball joints on your front end helps to reduce steering ?slop? and makes your car much safer to drive. Meet OE specification. Direct replacement that requires no...
1960-72 Chevrolet, GMC Truck; Single Coil Spring Retainer; Upper and Lower; Each
Reproduction of the original single coil spring retainer for use with 1960-72 Chevrolet and GMC model trucks. Each retainer cup is manufactured in stamped steel to original factory specifications featuring correct contours...
1960-62 Chevy, GMC Truck; Disc Brake Drop Spindles; 2.5"; Pair
Reproduction of the original 2.5" drop spindles designed to lower your Chevrolet or GMC truck while still maintaining the factory ride quality. Each drop spindle is manufuctured to factory specs. The stock ball joints and tie...
1960-72 Chevrolet, GMC Truck; Rear Control Arm; Passenger Side; Silver Weld-Thru™ Coating
Quality reproduction of the original rear control arm for 1960-72 Chevrolet, GMC truck models with rear coil springs. This control arm is also known as a trailing arm. Installs to the rear axle housing and the center cross...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...
1960-70 Chevy, GMC Truck; Upper Ball Joint with Hardware; RH or LH
Reproduction of the original upper ball joint and hardware designed to replace the old or worn out originals. If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
1960-91 Chevrolet, GMC C/K/R/V Pickup, Blazer, Suburban; Upper Control Arm Bumper; Each
Reproduction of the original upper control arm bumper for 1960-72 Chevrolet and GMC 1/2 ton, 3/4 ton, and 1 ton truck models, and 1973-91 Chevrolet and GMC 3/4 ton and 1 ton truck models. Each bumper is manufactured in heavy...
Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head
3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle.
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...