1960-62 Chevrolet/GMC Pickup; Stepside; Cross Sill Brace; Rear
The rear cross sill is located below the tailgate, and ties the back of the bed together. Bolted between the bed sides, it provides the rear mounting holes for the bed wood and strips.
1960-66 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Unpolished
Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1"...
1960-72 Chevrolet, GMC Pickup Truck; Fleetside; Reinforcement Strip; For Bed With Wood Floor; 72"
Reproduction of the original wood bed reinforcement strip for 1960-72 Chevrolet and GMC stepside pickup truck models. Reinforcement strips are shorter in height than cross sills, and bolt to the bed strips and angle strips,...
1960-72 Chevrolet, GMC; Stepside / Fleetside; Reinforcement Strip; For Bed With Wood Floor; 49.5"
Reproduction of the original stamped steel center reinforcement strip, or center cross sill for use with 1960-72 Chevrolet and GMC stepside pickup, and 1969-72 Chevrolet and GMC Fleetside Longhorn pickup models. This brace is...
1960-62 Chevrolet/GMC Truck; Rear Cross Sill; Fleetside
The rear cross sill is located below the tailgate, and ties the back of the bed together. Bolted between the bed sides, it provides the rear mounting holes for the bed wood and strips.
1960-66 Chevrolet, GMC Fleetside Pickup; Roll Pan; With License Plate Pocket and Two License Lamps
Customize the rear end of your classic truck with a sleek looking roll pan. Each roll pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....
1954-87 Chevrolet, GMC Stepside Pickup; Rear Roll Pan; without License Plate Pocket; Smooth Style
Customize the rear end of your classic Chevrolet or GMC stepside pickup truck with a sleek looking steel rear roll pan. This all steel roll pan is just what you need to add a custom appearance. Manufactured in stamped steel...
1960-66 Chevrolet, GMC Fleetside Pickup; Roll Pan; With License Plate Pocket; Without License Lamps
Customize the rear end of your classic truck with a sleek looking roll pan. Each roll pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....
1954-87 Chevrolet/GMC Stepside; Rear Roll Pan; With License Plate Pocket and Two License Lamps
Customize the rear end of your classic stepside truck with a sleek looking roll pan. The roll pan is perfect for those who want a unique and customized appearance for the rear. This roll pan features a built-in license plate...
1960-62 Chevrolet/GMC Truck Long Bed / Stepside Polished Stainless Steel Angle Strips
Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1"...
1960-66 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Polished
Reproduction of the original angle strips that attach the side boards on 1960-66 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
1960-62 Chevrolet/GMC Stepside; Angle Strips; Long Bed; Stainless Steel; Unpolished
Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1"...
1960-62 Chevrolet / GMC Truck; Fleetside; Cross Sill Brace
This cross sill is mounted across the frame under the wood for support. The bed strips are bolted to the cross sills giving the bed wood strength and rigidity and providing the surface to mount the bed to the truck frame....
1960-62 Chevrolet/GMC Stepside; Angle Strips; Long Bed; Raw Steel; Paintable
Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...
1960-66 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Raw Steel; Paintable
Reproduction of the original angle strips that attach the side boards on 1960-66 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
1960-66 Chevrolet, GMC Pickup Truck; Stepside; Bedside Step Hanger; Drivers Side
Reproduction of the original bed side step hanger designed for use with 1960-66 Chevrolet and GMC pickup truck Stepside models. Each bedside step hanger is manufactured in stamped steel to original factory specifications...
1960-66 Chevrolet, GMC Pickup Truck; Stepside; Bedside Step Hanger; Passenger Side
Reproduction of the original bed side step hanger designed for use with 1960-66 Chevrolet and GMC pickup truck Stepside models. Each bedside step hanger is manufactured in stamped steel to original factory specifications...