1958-67 Brake Pedal Pad with AutoTrans / Manual Brakes ; Various Models
Reproduction of the original brake pad for use on various GM models including the passenger cars listed below with automatic transmissions and manual brakes. Not for use on passenger cars originally equipped with power...
1962-67 Nova Manual Trans; 3-Piece Pedal Pad Set; Square Style (Power Brakes)
Reproduction of the original pedal pads designed for 1962-67 Nova models. This pedal pad set is designed to replace the pedal pads on 1962-67 Nova models with power brakes and manual transmissions. Replacing the pedal pads...
2-1/2" Brake Pedal Rod Extension with 3/8" hole; Zinc Plated
Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 2-1/2" overall, hole size is 3/8" on the end. Comes zinc plated...
Universal Pedal Rod Extension; 3/8"-24 Rod; Extends 3-1/8"; With 5/8" ID Eyelet
Universal fit Pedal Rod Extension with a 3/8-24" thread size rod that is commonly used on various classic car applications to extend the pedal to 3-1/8 inches in length. Features 5/8" ID eyelet.
Universal Pedal Rod; Ford, AMC, Jeep, Mopar Style; 3/8"-24 Female Thread; With 5/8" ID Eyelet
Universal fit Pedal Rod with a female 3/8-24" thread size rod that is commonly used on various classic vehicle applications including Ford, Mopar, AMC, Jeep applications. Features 5/8" ID eyelet. Fits 1964-66 Mustangs with...
3/8"-24 Push Rod Coupling Nut; 1" Long; Female / Female Thread
Complete your brake installation with this new 3/8"-24 threaded coupling nut. With a 3/8"-24 female thread you will be able to add and extension to most aftermarket pushrods to get the additional length you may need. Nut...
Universal Frame Mount Manual Brake Pedal Assembly
Frame mount brake pedal assembly for power brake applications. Powder coated in black, each kit comes with pedal pad to complete the assembly. Includes black powder coated brake pedal rod, brake pedal pad and hardware. For...
1958-67 GM Brake Pedal Pad with Auto Trans / Power Brakes
Reproduction of the original brake pedal pad designed for use on 1958-67 GM passenger cars with auto trans and power brakes. Each pad is manufactured to factory specifications in hard rubber and features the correct ribbed...
1962-67 Nova Manual Trans; 3-Piece Pedal Pad Set; Square Style (Manual Brakes)
Reproduction of the original pedal pads designed for use on 1962-67 Nova models. This pedal pad set is designed to replace the pads for 1962-67 Nova models with manual brakes and manual transmissions. Replacing the pedal pads...
Universal Pedal Rod Extension; 3/8"-24; Extends 6-1/2 to 7-1/2"
Universal fit Pedal Rod Extension with a 3/8-24" thread size commonly used on various classic truck applications to extend the pedal to 6-1/2 to 7-1/2 inches in length. Features grease fitting to keep coupler properly...
1962-67 Nova Manual Trans; 3-Piece Pedal Pad Set; Oval Style
Reproduction of the original pedal pads designed for use on 1962-67 Nova models. This pedal pad set is designed to replace the pads for 1962-67 Nova models with drum brakes and manual transmissions. Replacing the pedal pads...
1962-67 Nova Pedal Pad Set with Power Brake / Automatic Transmission
This pedal pad kit is designed to replace each pedal pad for 1962-67 Chevy II / Nova models with an automatic transmission. Each pad replicates the original in fit and appearance offering an authentic replacement. Replacing...
1962-67 Nova Pedal Kit For Manual Brake / Automatic Transmission
This pedal pad kit is designed to replace each pedal pad for 1962-67 Chevy II / Nova models with a auto trans and manual brakes. Each pedal pad replicates the original in fit and appearance offering an authentic replacement....
Universal 3/8"-24 Brake Pedal Clevis; Zinc Plated
Universal fit brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread,...
Brake Pedal Rod Extension; 4-3/4"; Zinc Plated; Universal Fit
Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod can be cut to your desired length if necessary. Rod measures 4-3/4"...
Universal Brake Pedal Clevis; Chrome Plated; 3/8"-24
Universal fit brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread,...
3/8"-24 Push Rod Extension; 4-3/4" Long; Female / Male Thread
Universal fit Pedal Rod Extension with a 3/8-24" thread size rod that is commonly used on various classic car applications to extend the pedal to 4-3/4 inches in length. Features male / female ends.
Universal Brake Pedal Rod Extension; 1-1/2" with 3/8" hole; Zinc Plated
Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 1-1/2" overall, hole size is 3/8" on the end. Comes zinc plated...
1958-1967 Impala, Bel Air, Biscayne, Caprice; Floor Mounted Accelerator Pad; Various Models
OER® Reproduction of the original accelerator pedal pad designed for use on various GM models from 1958-67 including 1958-64 Impala, Bel Air, Biscayne, full size models, and 1962-67 Chevy II/Nova models. This accelerator pad...
1962-65 Chevy II, Nova; Clutch & Brake Pedal Assembly; Manual Trans
Reproduction of the original clutch and brake pedal assembly designed for use with 1962-65 Chevrolet Nova models. These perfectly constructed brake and clutch pedal assemblies are manufactured in quality stamped steel...